Kayu (W0393) - Pe Report Rev1

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 27

6M BIPOD WALL MONTED DESIGN STRUCTURE AND

CONSTRUCTION FOR UMOBILE SDN. BHD.


(SITE NAME : KAYU)
( SITE ID : W0393 ) - Rooftop Area, Jalan Cempaka, Kg
Sungai Kayu Ara, Petaling Jaya,
Selangor

DESIGN ANALYSIS AND CALCULATIONS

B-5-8, Plaza Mont Kiara,


Mont Kiara,
50480 Wilayah Persekutuan
Kuala Lumpur
Tel : 03-2726 2718
Fax : 03-2726 2719
TABLE OF CONTENT

NO. DESCRIPTIONS

1. DESIGN BRIEF

a. Introduction

b. Codes of Practice and Procedures

c. Design Criteria

d. Design Consideration & assumptions

e. Summary of Results

2. DESIGN CALCULATION

a. Antenna Boom Design Calculations

3. DRAWINGS

a. 6m Bipod Wall Mounted


DESIGN BRIEF
DESIGN BRIEF
1.0 INTRODUCTION

This is the design analysis and calculations report for the proposed
installation of antenna on new structure construct on existing
building. This report shall be then forwarded together with all the
details and drawings for the submission to the relevant authorities
for their approval.

2.0 CODES OF PRACTICE AND PROCEDURES

The following design Codes of Practice and Procedures have


been adopted for the design and analysis :-

a) BS 6399, Part 2:1997 (Loading)

b) BS5950, Part 1:2000 (Structural Use of Steelwork in Building)


3.0 DESIGN CRITERIA
The following list of design criteria are adopted in the design.

a. Material Properties:
Structural Steel Section : Grade 43A (275 N/mm2)
Bolts : Grade 8.8

b. Factor of Safety:
Safety Factor for Loading shall be of minimum:-
Dead Load = 1.40
Imposed Load = 1.60
Wind Load = 1.20

c. Loadings
i. Design Wind Speed = 33.33 m/s (120 km/hr).

ii. Pole Ancillary Loadings


Floor Mount Wall Mount
LTE Antenna 3 -
Single RRU 12 -
Microwave 1 -
LTE Antenna 0 0
Double Arm RRU 0 0
Max. RRU 0 0
*Actual loading of structure shall be read in conjunction with
structural drawings.
d. Serviceability Limit
Overall Deviation of pole’s centre line shall not more than
1.0° in any direction from the original.

4.0 DESIGN CONSIDERATIONS AND ASSUMPTION

a. Structures is assumed to be designed in accordance to


Uniform Building By-Law and British Codes of Practice.

5.0 SUMMARY OF RESULTS

Based on the design analysis carried out using using the Structural
Analysis and Design Software known as PROKON Version 2.6
the analysis and design result for the structure (enclosed) is
satisfactory. Here are the summary of structural proposal:

I hereby certify that the installation of the new telecommunication


equipment base on the arrangement as laid out in the plans enclosed,
will not adversely affect the structural integrity of the existing building
at the time of inspection.
6m Bipod Wall Mounted
5.0 Wind Loading

The wind load on the structure is base on the BS 6399 Part 2 : 1997
As following

Basic wind speed, = 33.33 m/s

Site reference wind speed, Vs = Vb x Sa x Sd x Ss x Sp

where,
Vb = is the basic wind speed
Sa = is an altitude factor
Sd = is a direction factor
Ss = is a seasonal factor
Sp = is a probably factor

Vs = 33.33 x 1.0 x 1.0 x 1.0 x 1.0


= 33.33 m/s

Effective wind speed, Ve = Vs x Sb


= 33.33 x 1.7072
= 56.901 m/s
where Sb is the terrain and building height factor determine from effective height
as follows :-
The effective height :-
He = 0.4 Hr
= 0.4 ( 18 )
= 7.20 m

by interpolation using table 4 :


Factor for Sb is = 1.7072

Thus,

Dynamic Pressure, qs = 0.613 x V e ²


= 1.98 kN/m²

Dynamic Pressure 1.98 kN/m²


Nodal Load on Antenna :-
Sector Antenna size 2.100x0.369m 1.54 kN
Parabolic antenna of 0.6mø 0.56 kN
RRU of size 0.485x0.38m 0.37 kN
Job Number Sheet
KAYU 1
Job Title
6M BIPOD WM
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Deflections for Load Case 1

========== S p a c e - F r a m e A n a l y s i s - P R O K O N ===========
Ver W3.0.04 - 29 Jan 2016

========================== NODAL POINT COORDINATES ============================

Node No X-coord Y-coord Z-coord Node No X-coord Y-coord Z-coord


m m m m m m

1 1.500 0.000 0.000 2 1.500 0.200 0.000


3 1.500 0.600 0.000 4 1.500 3.000 0.000
5 1.500 3.500 0.000 6 1.500 5.000 0.000
7 1.500 6.000 0.000 8 3.000 0.000 0.000
9 0.000 1.500 1.500

=============================== ELEMENT DATA ==================================

Beam Secn. type Fixity Length ß Group no.


m (°)

1-2 1 00 0.200 0.00 0


2-3 1 00 0.400 0.00 0
3-4 1 00 2.400 0.00 0
4-5 1 00 0.500 0.00 0
5-6 1 00 1.500 0.00 0
6-7 1 00 1.000 0.00 0
5-8 2 00 3.808 0.00 0
5-9 2 00 2.915 0.00 0

============================ SECTION PROPERTIES ===============================

Section : 1 Section designation: 76.2x4.0 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

907.0E-6 0.000 0.000 593E-9 593E-9 1.19E-6 Steel:350W

Section : 2 Section designation: 60.3x3.5 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

625.0E-6 0.000 0.000 253E-9 253E-9 506E-9 Steel:350W

================================== MATERIALS ==================================


Job Number Sheet
KAYU 2
Job Title
6M BIPOD WM
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Designation E poisson Density Exp. coeff.


kPa kN/m^3
Steel:350W 200.0E6 0.30 77.00 11.70E-6

=============================== SUPPORT DATA ==================================

Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.

2 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0


3 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
8 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
9 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0

Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad

=================================== LOADS =====================================

Load Case Description

1 ANTENNA LOAD
2 WIND LOAD

Add own weight to load case : 1

============================= LOAD CASE 1 ====================================


ANTENNA LOAD

*** POINT LOADS ***

Node Fx Fy Fz Mx My Mz
kN kN kN kNm kNm kNm

6 0.00 0.00 1.54 0.00 0.00 0.00


6 1.54 0.00 0.00 0.00 0.00 0.00

============================= LOAD CASE 2 ====================================


WIND LOAD

*** BEAM ELEMENT LOADS ***

Element Dir P a Wl Wr a(left) Length dT


kN m kN/m kN/m m m °C

1-2 Z 0.00 0.00 1.98 1.98 0.00 0.20 0.00


2-3 Z 0.00 0.00 1.98 1.98 0.00 0.40 0.00
3-4 Z 0.00 0.00 1.98 1.98 0.00 2.40 0.00
4-5 Z 0.00 0.00 1.98 1.98 0.00 0.50 0.00
5-6 Z 0.00 0.00 1.98 1.98 0.00 1.50 0.00
6-7 Z 0.00 0.00 1.98 1.98 0.00 1.00 0.00

============================= LOAD COMBINATIONS ===============================

Load Comb Description

Comb. Load factor for each load case: Ultimate Limit State

1 2

A 1.00 1.00

Comb. Load factor for each load case: Serviceability Limit State

1 2

A 1.00 1.00

========================== OWN WEIGHT ACCELERATIONS ===========================


Job Number Sheet
KAYU 3
Job Title
6M BIPOD WM
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Direction Acceleration (g)


X 0.00
Y -1.00
Z 0.00

========================== OUTPUT: LINEAR ANALYSIS ============================


====================== NODAL POINT DISPLACEMENTS at SLS =======================

Node Lcase X-disp. Y-disp. Z-disp. X-rot. Y-rot. Z-rot.


mm mm mm rad. rad. rad.

1 1 0.00 0.00 0.00 0.0000 0.0000 0.0000


2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
3 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
4 1 -1.94 0.21 -1.57 0.0048 0.0017 -0.0045
2 2.16 0.49 -1.48 0.0066 0.0003 -0.0021
A 0.22 0.70 -3.05 0.0114 0.0020 -0.0066
5 1 1.62 0.25 2.18 0.0105 0.0021 -0.0100
2 3.36 0.59 5.03 0.0208 0.0003 -0.0027
A 4.98 0.84 7.21 0.0312 0.0024 -0.0127
6 1 31.25 0.25 32.49 0.0251 0.0021 -0.0246
2 7.44 0.59 74.93 0.0615 0.0003 -0.0027
A 38.69 0.84 107.42 0.0865 0.0024 -0.0273
7 1 55.87 0.25 57.57 0.0251 0.0021 -0.0246
2 10.17 0.59 138.49 0.0643 0.0003 -0.0027
A 66.04 0.84 196.05 0.0893 0.0024 -0.0273
8 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
9 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000

============================== REACTIONS AT ULS ===============================


(In rotated axes where applicable)
Note:Only load combinations have ULS load factors. Factor for Load Cases = 1

Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment


kN kN kN kNm kNm kNm

2 1 0.00 0.03 0.00 0.00 0.00 0.00


2 0.00 0.00 -0.79 0.01 0.00 0.00
A 0.00 0.03 -0.79 0.01 0.00 0.00
3 1 0.75 -15.42 0.76 0.67 -0.07 -0.68
2 0.03 -37.11 -1.80 -0.09 -0.01 0.06
A 0.79 -52.53 -1.04 0.58 -0.08 -0.62
8 1 -5.12 12.52 0.19 0.20 0.11 -0.26
2 -10.03 23.45 0.35 0.34 0.23 0.00
A -15.14 35.97 0.54 0.55 0.35 -0.26
9 1 2.82 3.62 -2.49 0.03 -0.25 0.00
2 9.99 13.67 -9.63 0.28 -0.24 0.28
A 12.82 17.28 -12.13 0.31 -0.49 0.28

EQUILIBRIUM CHECK AT ULS:

LC APPLIED LOADS & MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Px Py Pz Mx My Mz

1 1.54 -0.74 1.54 7.81 -2.31 -8.85


2 0.00 0.00 11.88 35.64 -17.82 0.00
A 1.54 -0.74 13.42 43.45 -20.13 -8.85

LC REACTIONS & REACTION MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Rx Ry Rz MRx MRy MRz

1 -1.54 0.74 -1.54 -7.81 2.31 8.85


2 0.00 0.00 -11.88 -35.64 17.82 0.00
A -1.54 0.74 -13.42 -43.45 20.13 8.85

================== REACTIONS AT SLS (Combinations only) =======================


Job Number Sheet
KAYU 4
Job Title
6M BIPOD WM
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

(In rotated axes where applicable)


Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment
kN kN kN kNm kNm kNm

2 A 0.00 0.03 -0.79 0.01 0.00 0.00


3 A 0.79 -52.53 -1.04 0.58 -0.08 -0.62
8 A -15.14 35.97 0.54 0.55 0.35 -0.26
9 A 12.82 17.28 -12.13 0.31 -0.49 0.28

============ BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==============

Elem Lcase Axial Y-Shear X-Shear Torsion M-yy M-xx


kN kN kN kNm kNm kNm

1- 1 0.00 0.00 0.00 0.00 0.00 0.00


2 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 -0.40 0.00 -0.04 0.00
A 0.00 0.00 0.00 0.00 0.00 0.00
0.01 0.00 -0.40 0.00 -0.04 0.00
2- 1 0.01 0.00 0.00 0.00 0.00 0.00
3 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -0.40 0.00 0.03 0.00
0.00 0.00 -0.40 0.00 -0.03 0.00
A 0.01 0.00 -0.40 0.00 0.03 0.00
0.01 0.00 -0.40 0.00 -0.03 0.00
3- 1 -15.44 -0.75 0.76 -0.07 -0.67 -0.68
4 15.60 0.75 -0.76 0.07 -1.15 -1.12
2 -37.11 -0.03 -1.41 -0.01 0.11 0.06
37.11 0.03 -3.35 0.01 -2.44 -0.14
A -52.55 -0.79 -0.65 -0.08 -0.56 -0.62
52.72 0.79 -4.10 0.08 -3.59 -1.27
4- 1 -15.60 -0.75 0.76 -0.07 1.15 1.12
5 15.64 0.75 -0.76 0.07 -1.53 -1.50
2 -37.11 -0.03 3.35 -0.01 2.44 0.14
37.11 0.03 -4.34 0.01 -4.36 -0.16
A -52.72 -0.79 4.10 -0.08 3.59 1.27
52.75 0.79 -5.09 0.08 -5.89 -1.66
5- 1 0.17 1.54 -1.54 0.00 2.31 2.31
6 -0.07 -1.54 1.54 0.00 0.00 0.00
2 0.00 0.00 -4.95 0.00 6.19 0.00
0.00 0.00 1.98 0.00 -0.99 0.00
A 0.17 1.54 -6.49 0.00 8.50 2.31
-0.07 -1.54 3.52 0.00 -0.99 0.00
6- 1 0.07 0.00 0.00 0.00 0.00 0.00
7 0.00 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
A 0.07 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
5- 1 13.36 -0.16 -0.19 0.02 0.51 -0.48
8 -13.52 0.23 0.19 -0.02 0.23 -0.26
2 25.50 -0.02 -0.35 0.08 0.92 -0.08
-25.50 0.02 0.35 -0.08 0.41 0.00
A 38.86 -0.18 -0.54 0.10 1.43 -0.55
-39.02 0.25 0.54 -0.10 0.64 -0.26
5- 1 5.12 0.05 0.23 -0.16 -0.49 0.02
9 -5.22 0.05 -0.23 0.16 -0.20 -0.02
2 19.47 -0.43 0.25 -0.16 -0.56 -0.84
-19.47 0.43 -0.25 0.16 -0.18 -0.40
A 24.59 -0.37 0.49 -0.32 -1.05 -0.82
-24.69 0.48 -0.49 0.32 -0.37 -0.42

============================== STATISTICAL DATA ===============================

Weights of beam elements: (Added to load case 1)

Section Designation Total Mass


(kN) (kg)

1 76.2x4.0 O1 0.419 42.7


2 60.3x3.5 O1 0.324 33.0
---------------------
0.743 75.7

Total weight of structure = 0.74 kN


Job Number Sheet
KAYU 5
Job Title
6M BIPOD WM
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

No. of real numbers in Stiffness matrix = 0 (0 bytes)


Time used to analyse = 0: 0:0.014 seconds
Total number of : Nodes = 9
Beam Elements = 8
Cable Elements = 0
Shell Elements = 0
Supports = 4
Section Properties = 2
Load Cases = 2
Load Combinations = 1

=============================== END OF OUTPUT =================================


Job Number Sheet
KAYU 1
Job Title
6M BIPOD WM 2
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Deflections for Load Case 1

========== S p a c e - F r a m e A n a l y s i s - P R O K O N ===========
Ver W3.0.04 - 29 Jan 2016

========================== NODAL POINT COORDINATES ============================

Node No X-coord Y-coord Z-coord Node No X-coord Y-coord Z-coord


m m m m m m

1 1.500 0.000 0.000 2 1.500 0.200 0.000


3 1.500 0.600 0.000 4 1.500 3.000 0.000
5 1.500 3.500 0.000 6 1.500 5.000 0.000
7 1.500 6.000 0.000 8 3.000 0.000 0.000
9 0.000 1.500 1.500

=============================== ELEMENT DATA ==================================

Beam Secn. type Fixity Length ß Group no.


m (°)

1-2 1 00 0.200 0.00 0


2-3 1 00 0.400 0.00 0
3-4 1 00 2.400 0.00 0
4-5 1 00 0.500 0.00 0
5-6 1 00 1.500 0.00 0
6-7 1 00 1.000 0.00 0
5-8 2 00 3.808 0.00 0
5-9 2 00 2.915 0.00 0

============================ SECTION PROPERTIES ===============================

Section : 1 Section designation: 76.2x4.0 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

907.0E-6 0.000 0.000 593E-9 593E-9 1.19E-6 Steel:350W

Section : 2 Section designation: 60.3x3.5 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

625.0E-6 0.000 0.000 253E-9 253E-9 506E-9 Steel:350W

================================== MATERIALS ==================================


Job Number Sheet
KAYU 2
Job Title
6M BIPOD WM 2
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Designation E poisson Density Exp. coeff.


kPa kN/m^3
Steel:350W 200.0E6 0.30 77.00 11.70E-6

=============================== SUPPORT DATA ==================================

Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.

2 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0


3 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
8 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
9 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0

Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad

=================================== LOADS =====================================

Load Case Description

1 ANTENNA LOAD
2 WIND LOAD

Add own weight to load case : 1

============================= LOAD CASE 1 ====================================


ANTENNA LOAD

*** POINT LOADS ***

Node Fx Fy Fz Mx My Mz
kN kN kN kNm kNm kNm

6 -1.54 0.00 1.54 0.00 0.00 0.00


6 1.54 0.00 0.00 0.00 0.00 0.00

============================= LOAD CASE 2 ====================================


WIND LOAD

*** BEAM ELEMENT LOADS ***

Element Dir P a Wl Wr a(left) Length dT


kN m kN/m kN/m m m °C

1-2 Z 0.00 0.00 1.98 1.98 0.00 0.20 0.00


2-3 Z 0.00 0.00 1.98 1.98 0.00 0.40 0.00
3-4 Z 0.00 0.00 1.98 1.98 0.00 2.40 0.00
4-5 Z 0.00 0.00 1.98 1.98 0.00 0.50 0.00
5-6 Z 0.00 0.00 1.98 1.98 0.00 1.50 0.00
6-7 Z 0.00 0.00 1.98 1.98 0.00 1.00 0.00

============================= LOAD COMBINATIONS ===============================

Load Comb Description

Comb. Load factor for each load case: Ultimate Limit State

1 2

A 1.00 1.00

Comb. Load factor for each load case: Serviceability Limit State

1 2

A 1.00 1.00

========================== OWN WEIGHT ACCELERATIONS ===========================


Job Number Sheet
KAYU 3
Job Title
6M BIPOD WM 2
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Direction Acceleration (g)


X 0.00
Y -1.00
Z 0.00

========================== OUTPUT: LINEAR ANALYSIS ============================


====================== NODAL POINT DISPLACEMENTS at SLS =======================

Node Lcase X-disp. Y-disp. Z-disp. X-rot. Y-rot. Z-rot.


mm mm mm rad. rad. rad.

1 1 0.00 0.00 0.00 0.0000 0.0000 0.0000


2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
3 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
4 1 0.47 0.12 -2.05 0.0042 0.0003 -0.0006
2 2.16 0.49 -1.48 0.0066 0.0003 -0.0021
A 2.63 0.62 -3.53 0.0108 0.0005 -0.0027
5 1 0.88 0.15 1.31 0.0095 0.0003 -0.0010
2 3.36 0.59 5.03 0.0208 0.0003 -0.0027
A 4.23 0.74 6.34 0.0303 0.0007 -0.0037
6 1 2.34 0.15 30.17 0.0241 0.0003 -0.0010
2 7.44 0.59 74.93 0.0615 0.0003 -0.0027
A 9.78 0.74 105.10 0.0856 0.0007 -0.0037
7 1 3.31 0.15 54.28 0.0241 0.0003 -0.0010
2 10.17 0.59 138.49 0.0643 0.0003 -0.0027
A 13.48 0.74 192.76 0.0884 0.0007 -0.0037
8 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
9 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000

============================== REACTIONS AT ULS ===============================


(In rotated axes where applicable)
Note:Only load combinations have ULS load factors. Factor for Load Cases = 1

Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment


kN kN kN kNm kNm kNm

2 1 0.00 0.03 0.00 0.00 0.00 0.00


2 0.00 0.00 -0.79 0.01 0.00 0.00
A 0.00 0.03 -0.79 0.01 0.00 0.00
3 1 0.03 -9.35 0.73 0.67 -0.01 -0.01
2 0.03 -37.11 -1.80 -0.09 -0.01 0.06
A 0.07 -46.46 -1.08 0.58 -0.02 0.06
8 1 -2.66 6.33 0.17 0.18 0.11 -0.03
2 -10.03 23.45 0.35 0.34 0.23 0.00
A -12.69 29.77 0.52 0.52 0.35 -0.03
9 1 2.63 3.73 -2.44 0.17 -0.13 0.14
2 9.99 13.67 -9.63 0.28 -0.24 0.28
A 12.62 17.40 -12.07 0.46 -0.37 0.42

EQUILIBRIUM CHECK AT ULS:

LC APPLIED LOADS & MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Px Py Pz Mx My Mz

1 0.00 -0.74 1.54 7.81 -2.31 -1.15


2 0.00 0.00 11.88 35.64 -17.82 0.00
A 0.00 -0.74 13.42 43.45 -20.13 -1.15

LC REACTIONS & REACTION MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Rx Ry Rz MRx MRy MRz

1 0.00 0.74 -1.54 -7.81 2.31 1.15


2 0.00 0.00 -11.88 -35.64 17.82 0.00
A 0.00 0.74 -13.42 -43.45 20.13 1.15

================== REACTIONS AT SLS (Combinations only) =======================


Job Number Sheet
KAYU 4
Job Title
6M BIPOD WM 2
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

(In rotated axes where applicable)


Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment
kN kN kN kNm kNm kNm

2 A 0.00 0.03 -0.79 0.01 0.00 0.00


3 A 0.07 -46.46 -1.08 0.58 -0.02 0.06
8 A -12.69 29.77 0.52 0.52 0.35 -0.03
9 A 12.62 17.40 -12.07 0.46 -0.37 0.42

============ BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==============

Elem Lcase Axial Y-Shear X-Shear Torsion M-yy M-xx


kN kN kN kNm kNm kNm

1- 1 0.00 0.00 0.00 0.00 0.00 0.00


2 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 -0.40 0.00 -0.04 0.00
A 0.00 0.00 0.00 0.00 0.00 0.00
0.01 0.00 -0.40 0.00 -0.04 0.00
2- 1 0.01 0.00 0.00 0.00 0.00 0.00
3 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -0.40 0.00 0.03 0.00
0.00 0.00 -0.40 0.00 -0.03 0.00
A 0.01 0.00 -0.40 0.00 0.03 0.00
0.01 0.00 -0.40 0.00 -0.03 0.00
3- 1 -9.36 -0.03 0.73 -0.01 -0.67 -0.01
4 9.53 0.03 -0.73 0.01 -1.08 -0.07
2 -37.11 -0.03 -1.41 -0.01 0.11 0.06
37.11 0.03 -3.35 0.01 -2.44 -0.14
A -46.47 -0.07 -0.68 -0.02 -0.55 0.06
46.64 0.07 -4.07 0.02 -3.52 -0.21
4- 1 -9.53 -0.03 0.73 -0.01 1.08 0.07
5 9.56 0.03 -0.73 0.01 -1.44 -0.08
2 -37.11 -0.03 3.35 -0.01 2.44 0.14
37.11 0.03 -4.34 0.01 -4.36 -0.16
A -46.64 -0.07 4.07 -0.02 3.52 0.21
46.68 0.07 -5.06 0.02 -5.80 -0.25
5- 1 0.17 0.00 -1.54 0.00 2.31 0.00
6 -0.07 0.00 1.54 0.00 0.00 0.00
2 0.00 0.00 -4.95 0.00 6.19 0.00
0.00 0.00 1.98 0.00 -0.99 0.00
A 0.17 0.00 -6.49 0.00 8.50 0.00
-0.07 0.00 3.52 0.00 -0.99 0.00
6- 1 0.07 0.00 0.00 0.00 0.00 0.00
7 0.00 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
A 0.07 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
5- 1 6.70 0.03 -0.17 0.04 0.44 -0.01
8 -6.86 0.05 0.17 -0.04 0.21 -0.03
2 25.50 -0.02 -0.35 0.08 0.92 -0.08
-25.50 0.02 0.35 -0.08 0.41 0.00
A 32.19 0.00 -0.52 0.12 1.36 -0.09
-32.36 0.07 0.52 -0.12 0.61 -0.03
5- 1 5.07 -0.16 0.13 -0.07 -0.28 -0.38
9 -5.17 0.26 -0.13 0.07 -0.11 -0.22
2 19.47 -0.43 0.25 -0.16 -0.56 -0.84
-19.47 0.43 -0.25 0.16 -0.18 -0.40
A 24.54 -0.58 0.39 -0.24 -0.84 -1.22
-24.64 0.68 -0.39 0.24 -0.29 -0.62

============================== STATISTICAL DATA ===============================

Weights of beam elements: (Added to load case 1)

Section Designation Total Mass


(kN) (kg)

1 76.2x4.0 O1 0.419 42.7


2 60.3x3.5 O1 0.324 33.0
---------------------
0.743 75.7

Total weight of structure = 0.74 kN


Job Number Sheet
KAYU 5
Job Title
6M BIPOD WM 2
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

No. of real numbers in Stiffness matrix = 0 (0 bytes)


Time used to analyse = 0: 0:0.014 seconds
Total number of : Nodes = 9
Beam Elements = 8
Cable Elements = 0
Shell Elements = 0
Supports = 4
Section Properties = 2
Load Cases = 2
Load Combinations = 1

=============================== END OF OUTPUT =================================


Job Number Sheet
KAYU 1
Job Title
6M BIPOD WM 3
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Deflections for Load Case 1

========== S p a c e - F r a m e A n a l y s i s - P R O K O N ===========
Ver W3.0.04 - 29 Jan 2016

========================== NODAL POINT COORDINATES ============================

Node No X-coord Y-coord Z-coord Node No X-coord Y-coord Z-coord


m m m m m m

1 1.500 0.000 0.000 2 1.500 0.200 0.000


3 1.500 0.600 0.000 4 1.500 3.000 0.000
5 1.500 3.500 0.000 6 1.500 5.000 0.000
7 1.500 6.000 0.000 8 3.000 0.000 0.000
9 0.000 1.500 1.500

=============================== ELEMENT DATA ==================================

Beam Secn. type Fixity Length ß Group no.


m (°)

1-2 1 00 0.200 0.00 0


2-3 1 00 0.400 0.00 0
3-4 1 00 2.400 0.00 0
4-5 1 00 0.500 0.00 0
5-6 1 00 1.500 0.00 0
6-7 1 00 1.000 0.00 0
5-8 2 00 3.808 0.00 0
5-9 2 00 2.915 0.00 0

============================ SECTION PROPERTIES ===============================

Section : 1 Section designation: 76.2x4.0 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

907.0E-6 0.000 0.000 593E-9 593E-9 1.19E-6 Steel:350W

Section : 2 Section designation: 60.3x3.5 O1


----------------
A Ay Ax Ixx Iyy J Material
m^2 m^2 m^2 m^4 m^4 m^4

625.0E-6 0.000 0.000 253E-9 253E-9 506E-9 Steel:350W

================================== MATERIALS ==================================


Job Number Sheet
KAYU 2
Job Title
6M BIPOD WM 3
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Designation E poisson Density Exp. coeff.


kPa kN/m^3
Steel:350W 200.0E6 0.30 77.00 11.70E-6

=============================== SUPPORT DATA ==================================

Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.

2 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0


3 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
8 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0
9 XYZxyz 0.00 0.00 0.00 0.00 0.00 0.00 0

Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad

=================================== LOADS =====================================

Load Case Description

1 MICROWAVE LOAD
2 WIND LOAD

Add own weight to load case : 1

============================= LOAD CASE 1 ====================================


MICROWAVE LOAD

*** POINT LOADS ***

Node Fx Fy Fz Mx My Mz
kN kN kN kNm kNm kNm

6 0.00 0.00 0.56 0.00 0.00 0.00


6 0.56 0.00 0.00 0.00 0.00 0.00

============================= LOAD CASE 2 ====================================


WIND LOAD

*** BEAM ELEMENT LOADS ***

Element Dir P a Wl Wr a(left) Length dT


kN m kN/m kN/m m m °C

1-2 Z 0.00 0.00 1.98 1.98 0.00 0.20 0.00


2-3 Z 0.00 0.00 1.98 1.98 0.00 0.40 0.00
3-4 Z 0.00 0.00 1.98 1.98 0.00 2.40 0.00
4-5 Z 0.00 0.00 1.98 1.98 0.00 0.50 0.00
5-6 Z 0.00 0.00 1.98 1.98 0.00 1.50 0.00
6-7 Z 0.00 0.00 1.98 1.98 0.00 1.00 0.00

============================= LOAD COMBINATIONS ===============================

Load Comb Description

Comb. Load factor for each load case: Ultimate Limit State

1 2

A 1.00 1.00

Comb. Load factor for each load case: Serviceability Limit State

1 2

A 1.00 1.00

========================== OWN WEIGHT ACCELERATIONS ===========================


Job Number Sheet
KAYU 3
Job Title
6M BIPOD WM 3
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

Direction Acceleration (g)


X 0.00
Y -1.00
Z 0.00

========================== OUTPUT: LINEAR ANALYSIS ============================


====================== NODAL POINT DISPLACEMENTS at SLS =======================

Node Lcase X-disp. Y-disp. Z-disp. X-rot. Y-rot. Z-rot.


mm mm mm rad. rad. rad.

1 1 0.00 0.00 0.00 0.0000 0.0000 0.0000


2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
3 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
4 1 -0.72 0.07 -0.60 0.0018 0.0006 -0.0016
2 2.16 0.49 -1.48 0.0066 0.0003 -0.0021
A 1.44 0.56 -2.08 0.0084 0.0009 -0.0037
5 1 0.58 0.09 0.78 0.0038 0.0008 -0.0037
2 3.36 0.59 5.03 0.0208 0.0003 -0.0027
A 3.94 0.68 5.81 0.0246 0.0011 -0.0064
6 1 11.37 0.09 11.86 0.0092 0.0008 -0.0090
2 7.44 0.59 74.93 0.0615 0.0003 -0.0027
A 18.82 0.68 86.79 0.0706 0.0011 -0.0117
7 1 20.34 0.09 21.01 0.0092 0.0008 -0.0090
2 10.17 0.59 138.49 0.0643 0.0003 -0.0027
A 30.51 0.68 159.50 0.0734 0.0011 -0.0117
8 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000
9 1 0.00 0.00 0.00 0.0000 0.0000 0.0000
2 0.00 0.00 0.00 0.0000 0.0000 0.0000
A 0.00 0.00 0.00 0.0000 0.0000 0.0000

============================== REACTIONS AT ULS ===============================


(In rotated axes where applicable)
Note:Only load combinations have ULS load factors. Factor for Load Cases = 1

Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment


kN kN kN kNm kNm kNm

2 1 0.00 0.03 0.00 0.00 0.00 0.00


2 0.00 0.00 -0.79 0.01 0.00 0.00
A 0.00 0.03 -0.79 0.01 0.00 0.00
3 1 0.28 -5.28 0.28 0.25 -0.02 -0.25
2 0.03 -37.11 -1.80 -0.09 -0.01 0.06
A 0.31 -42.40 -1.52 0.16 -0.03 -0.19
8 1 -1.87 4.63 0.07 0.08 0.04 -0.11
2 -10.03 23.45 0.35 0.34 0.23 0.00
A -11.89 28.08 0.42 0.42 0.28 -0.11
9 1 1.03 1.37 -0.91 0.02 -0.09 0.01
2 9.99 13.67 -9.63 0.28 -0.24 0.28
A 11.02 15.03 -10.54 0.30 -0.33 0.29

EQUILIBRIUM CHECK AT ULS:

LC APPLIED LOADS & MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Px Py Pz Mx My Mz

1 0.56 -0.74 0.56 2.91 -0.84 -3.95


2 0.00 0.00 11.88 35.64 -17.82 0.00
A 0.56 -0.74 12.44 38.55 -18.66 -3.95

LC REACTIONS & REACTION MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Rx Ry Rz MRx MRy MRz

1 -0.56 0.74 -0.56 -2.91 0.84 3.95


2 0.00 0.00 -11.88 -35.64 17.82 0.00
A -0.56 0.74 -12.44 -38.55 18.66 3.95

================== REACTIONS AT SLS (Combinations only) =======================


Job Number Sheet
KAYU 4
Job Title
6M BIPOD WM 3
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

(In rotated axes where applicable)


Node Lcase X-force Y-force Z-force X-moment Y-moment Z-moment
kN kN kN kNm kNm kNm

2 A 0.00 0.03 -0.79 0.01 0.00 0.00


3 A 0.31 -42.40 -1.52 0.16 -0.03 -0.19
8 A -11.89 28.08 0.42 0.42 0.28 -0.11
9 A 11.02 15.03 -10.54 0.30 -0.33 0.29

============ BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==============

Elem Lcase Axial Y-Shear X-Shear Torsion M-yy M-xx


kN kN kN kNm kNm kNm

1- 1 0.00 0.00 0.00 0.00 0.00 0.00


2 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 -0.40 0.00 -0.04 0.00
A 0.00 0.00 0.00 0.00 0.00 0.00
0.01 0.00 -0.40 0.00 -0.04 0.00
2- 1 0.01 0.00 0.00 0.00 0.00 0.00
3 0.01 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -0.40 0.00 0.03 0.00
0.00 0.00 -0.40 0.00 -0.03 0.00
A 0.01 0.00 -0.40 0.00 0.03 0.00
0.01 0.00 -0.40 0.00 -0.03 0.00
3- 1 -5.30 -0.28 0.28 -0.02 -0.25 -0.25
4 5.46 0.28 -0.28 0.02 -0.42 -0.41
2 -37.11 -0.03 -1.41 -0.01 0.11 0.06
37.11 0.03 -3.35 0.01 -2.44 -0.14
A -42.41 -0.31 -1.13 -0.03 -0.13 -0.19
42.58 0.31 -3.62 0.03 -2.86 -0.56
4- 1 -5.46 -0.28 0.28 -0.02 0.42 0.41
5 5.50 0.28 -0.28 0.02 -0.56 -0.55
2 -37.11 -0.03 3.35 -0.01 2.44 0.14
37.11 0.03 -4.34 0.01 -4.36 -0.16
A -42.58 -0.31 3.62 -0.03 2.86 0.56
42.61 0.31 -4.61 0.03 -4.92 -0.71
5- 1 0.17 0.56 -0.56 0.00 0.84 0.84
6 -0.07 -0.56 0.56 0.00 0.00 0.00
2 0.00 0.00 -4.95 0.00 6.19 0.00
0.00 0.00 1.98 0.00 -0.99 0.00
A 0.17 0.56 -5.51 0.00 7.03 0.84
-0.07 -0.56 2.54 0.00 -0.99 0.00
6- 1 0.07 0.00 0.00 0.00 0.00 0.00
7 0.00 0.00 0.00 0.00 0.00 0.00
2 0.00 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
A 0.07 0.00 -1.98 0.00 0.99 0.00
0.00 0.00 0.00 0.00 0.00 0.00
5- 1 4.82 -0.03 -0.07 0.01 0.19 -0.16
8 -4.99 0.11 0.07 -0.01 0.09 -0.11
2 25.50 -0.02 -0.35 0.08 0.92 -0.08
-25.50 0.02 0.35 -0.08 0.41 0.00
A 30.32 -0.05 -0.42 0.09 1.10 -0.23
-30.49 0.13 0.42 -0.09 0.49 -0.11
5- 1 1.84 0.05 0.09 -0.06 -0.18 0.02
9 -1.94 0.05 -0.09 0.06 -0.07 -0.02
2 19.47 -0.43 0.25 -0.16 -0.56 -0.84
-19.47 0.43 -0.25 0.16 -0.18 -0.40
A 21.31 -0.38 0.34 -0.22 -0.74 -0.82
-21.41 0.48 -0.34 0.22 -0.25 -0.42

============================== STATISTICAL DATA ===============================

Weights of beam elements: (Added to load case 1)

Section Designation Total Mass


(kN) (kg)

1 76.2x4.0 O1 0.419 42.7


2 60.3x3.5 O1 0.324 33.0
---------------------
0.743 75.7

Total weight of structure = 0.74 kN


Job Number Sheet
KAYU 5
Job Title
6M BIPOD WM 3
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com UMOBILE SDN BHD
E-Mail : mail@prokon.com Calcs by Checked by Date

No. of real numbers in Stiffness matrix = 0 (0 bytes)


Time used to analyse = 0: 0:0.010 seconds
Total number of : Nodes = 9
Beam Elements = 8
Cable Elements = 0
Shell Elements = 0
Supports = 4
Section Properties = 2
Load Cases = 2
Load Combinations = 1

=============================== END OF OUTPUT =================================


DRAWING

You might also like