Professional Documents
Culture Documents
PDF PDF
PDF PDF
2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
Notes:
1. Spot welds spacing shall be in accordance with the subject production part.
2. Specimen lengths shall be as required.
3. See Clause 3, Terms and Definitions, for definition of close-spaced spot weld.
4. Welds shall be located within ±0.060 in [±1.5 mm] of specimen centers. Specimen size tolerance shall be ±0.060 in [±1.5 mm].
AWS D17.2/D17.2M:2019
Notes:
1. Spot welds spacing shall be in accordance with subject production parts.
2. Welds shall be located within ±0.060 in [±1.5 mm] of specimen centers. Specimen size tolerance shall be ±0.060 in [±1.5 mm].
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
Preproduction Lot.
Routine Lot.
Postproduction Lot.
AWS D17.2/D17.2M:2019
EQUIPMENT IDENTIFICATION
TYPE _____________________ SERIAL _____________
TRANSFORMER NO. ________ RATING _____________
CONTROL _________________
SIDE SIDE
A B
Thickness Weld Current
Approx. Analysis (type) S. C. Current
Tap and/or Phase Setting
Throat Height
MATERIAL
EQUIPMENT IDENTIFICATION
TYPE _____________________ SERIAL _____________
TRANSFORMER NO. ________ RATING _____________
CONTROL _________________
AWS D17.2/D17.2M:2019
AWS D17.2/D17.2M:2019
(0.81 Combined
Thickness)
(4.06 Combined
Thickness)