Professional Documents
Culture Documents
ADL400 Manual
ADL400 Manual
ADL400 Current
Maximum current
Consumption
80A,6A
<1VA
Accuracy ±0.2%
range 45~65Hz
Frequency
accuracy ±0.2%
Width 80±20ms
Active Pulse
constant 1000imp/kWh,10000imp/kWh
Interface RS485
Communication
General Protocol Modbus RTU
ADL400 three phase electric meter is designed for three phase ■ Working environment
energy measurement on low voltage system.The meter meet the related
technical requirements of electronic meter in the IEC62053-21、 Working -25℃~55℃
Temperature
IEC62053-22 standards. Storing -40℃~70℃
Parameters
■ Electric performance
3×100V、 3×380V、
Nominal voltage
3×57.7/100V、 3×220/380V
Figure 2 connect via CT
Voltage Consumption <10VA(Single phase)
Impedance >2MΩ Note:The torque of direct connect should not be greater than 4.0N·m,
and the torque of connect via CT should not be greater than 2.0N·m。
Accuracy ±0.2%
Display examples
A
Fig 5 Three phase three lines connect via CT Voltage of three phase
21 22 17 18
A1 B1 Ep+ Ep-