Professional Documents
Culture Documents
HOW TO RE-IMAGE VNX UNIFIED - Bobby Petrov - Answers To The HOW TO in The IT World
HOW TO RE-IMAGE VNX UNIFIED - Bobby Petrov - Answers To The HOW TO in The IT World
HOW TO RE-IMAGE VNX UNIFIED - Bobby Petrov - Answers To The HOW TO in The IT World
+44 740 406 1608 | bvpetrov@gmail.com
Recent Posts
HOW TO RE-IMAGE VNX UNIFIED
HOW TO TEST PORTS FOR
FRAME ERRORS –
0. BEFORE YOU START THAT PROCEDURE MAKE SURE YOU HAVE THE CORESPONDING
BROCADE
RECOVERY IMAGES FOR BLOCK AND FILE
( BLOCK 5.32 with FILE OE 7.1 | BLOCK 5.33 with FILE OE 8.1)
CISCO VPN – REASON 442
FAILED TO ENABLE
0.1. THE RE-IMAGE WILL ERASE ALL SOFTWARE LICENSES (ENABLERS) ON YOUR
VIRTUAL ADAPTER
SYSTEM. PLEASE MAKE SURE YOU HAVE THE ENABLER FILES OR CONFIRM YOU WON’T
NEED ANY AFTER RE-IMAGING THE SYSTEM.
1. Connect to both SPs and verify credentials HOW TO ADD LINUX
2. Set COM connection to SPA and start a PUTTY session: CENTOS7 TO WINDOWS
use the following setting DOMAIN
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 1/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
enabled you won’t see that option, instead you will see “7. View LAN Settings”)
10. From Utility Partition menu Choose “9. Enable Engineering Mode” – the
passowrd is “wombat”
11. From Utility Partition chose “12”
===============================================================================
CLARiiON Utility Toolkit Main Menu
===============================================================================
1) About the Utility Toolkit
2) About this Array
3) Reset Storage Processor
4) Image Repository Sub-Menu
5) Plugin Sub-Menu
6) NVRAM Sub-Menu
7) View LAN Service Port Settings
8) Network Diagnostic Tools
9) Enable Web Console
10) Disable Engineering Mode
11) Install Images to Recover OS
12) Install Images to Restore Factory Con guration
13) Save Logs
Enter Option: 12
12. On that screen answer “y” and hit ENTER
===============================================================================
Install Images with AutoCon g
===============================================================================
!!!WARNING!!!
When installing images using AutoCon g functionality, all existing array
con guration and user data will be PERMANENTLY DESTROYED!
Continue from the serial console (if the process in interupted start from step 11.
just skip the ftp upload)
===============================================================================
Select Images to Install
===============================================================================
1) ICA_FLARE_PARTITION_REGION 05.32.000.5.219
2) ICA_FLARE_PARTITION_REGION 05.32.000.5.201
3) Back to the Main Menu
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 2/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
Enter comma separated list of options: “the image you want to recover from”
14. On that screen answer “y” and hit ENTER
===============================================================================
Select NDU Packages to Install
===============================================================================
You may transfer ndu packages to the ramdisk by opening an FTP Session
ftp://clariion1992:clariion1992@10.10.64.102/
Do you wish to continue? y/n [y] “y” and enter
15. On that screen answer “n” and hit ENTER
===============================================================================
Con gure Network Settings for SP A
===============================================================================
Do you wish to use your existing network settings for SP A? y/n [y] “n” and enter
16. On that screen answer “y” and hit ENTER
===============================================================================
Con gure Network Settings for SP A
===============================================================================
Do you wish to con gure the network settings for SP A? y/n [y] “y”
17. On that screen answer “y” and hit ENTER
===============================================================================
Con gure Network Settings for SP A
===============================================================================
IP Address: 128.221.252.200
Subnet Mask: 255.255.255.0
Default Gateway: 128.221.252.104
Host Name: spa
Domain Name:
18. On that screen answer “y” and hit ENTER
===============================================================================
Local SP (SP A) Automatic Reboot Settings
===============================================================================
Would you like ‘SP A’ to automatically reboot after imaging completes? y/n [n] y
19. On that screen answer “n” and hit ENTER
===============================================================================
Con gure Network Settings for SP B
===============================================================================
Do you wish to use your existing network settings for SP B? y/n [y] “n” and enter
20. On that screen answer “y” and hit ENTER
===============================================================================
Con gure Network Settings for SP B
===============================================================================
Do you wish to con gure the network settings for SP B? y/n [y] “y”
21. On that screen answer “y” and hit ENTER
===============================================================================
Con gure Network Settings for SP B
===============================================================================
IP Address: 128.221.253.201
Subnet Mask: 255.255.255.0
Default Gateway: 128.221.253.104
Host Name: spb
Domain Name:
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 3/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
22. BE CAREFUL AND REVIEW DETAILS. On that screen answer “y” and hit ENTER
=========================================================================
Con rm Selections
=========================================================================
Images to be installed:
ICA_FLARE_PARTITION_REGION 05.32.000.5.219
Packages to be installed:
Network con guration for SP A
IP Address: 128.221.252.200
Subnet Mask: 255.255.255.0
Default Gateway: 128.221.252.104
Host Name: spa
Domain Name:
Network con guration for SP B
IP Address: 128.221.253.201
Subnet Mask: 255.255.255.0
Default Gateway: 128.221.253.104
Host Name: spb
Domain Name:
This SP will automatically reboot when imaging completes
Is this information correct? y/n [n] y
23. Installation starts and you will see a screen like this:
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 4/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
for VNX2:
SASPMC 0 (SAS0) UEFI block reads performed 3456
SASPMC 0 (SAS0) UEFI block reads performed 3584
SASPMC 0 (SAS0) UEFI block reads performed 3712
25. Once you have con rmed that SPA has completed all the reboots and is running
normally, connect serial cable to SPB and physically insert SPB back into the
midplane. SPB will reboot several times as well, until green LED light is steady on
the back of the SPB, then you can continue to the next step. Takes about 40-50
minutes.
26. Once SPB nishes the reboots and it’s operating ne, recable the MGMT ports
to the Data Movers
27. Connect serial cable to CS0 using 19200 8 1 none none for PUTTY
28. If running a dual control station turn-o CS1. Insert the DVD disk with the le
OS in CS0 and reboot the CS.
29. Restart CS0 and wait to boot from cd. When the system loads from disk “boot”
will be prompt, then type “integrated:
boot:integrated
30. System will reboot and start intallation. After about 10 min the DVD disk will
be ejected.
31. Tab to the “OK” screens for the rst three screens, and on the fourth screen tab
to “NO” !!! – this is to allow us to use VNX Installation Assistant later on.
Primary Internal Network Setup > OK
IPMI Network Setup > OK
Backup Internal Network Setup > OK
Network Coni guration Tab > Tab from “YES” to “NO”
[IF THERE ARE PROBLEMS WITH THE LOGS – CLEAR THE LOGS]
34. For single control station, reboot now. For dual control station, power-up CS1
now and perform the “boot:integrated” installation on CS1. After the installation
completes on CS1 reboot. Make sure after the reboot you see the following
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 5/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
36. The system is ready to be con gured with the version speci c 7.1/8.1 VIA
WELL DONE!!!
Related Posts
Leave A Comment
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 6/7
18/04/2019 HOW TO RE-IMAGE VNX UNIFIED – Bobby Petrov | Answers to the HOW TO in the IT world
Comment...
POST COMMENT
https://www.bobbypetrov.co.uk/how-to-re-image-vnx-unified/ 7/7