Professional Documents
Culture Documents
Fig-825 - TOLCO
Fig-825 - TOLCO
Fig-825 - TOLCO
Instruction sheet
Maximum
When used with UL rated load
Component of State of
Fig. 909 1370 lbs California OSHPD Approved
Seismic Restraints System
Fig. 910 1500 lbs
Fig. 980 1600 lbs
Fig. 825
Fig. 825
Fig. 980
Fig. 980
I-Beam
To Install: Place the Fig. 825 on the steel beam, tighten the cone point set screws until heads
break off (hint: apply between 31-35 lb. ft. of torque). Attach other TOLCO transitional attachment
fitting, Fig. 909, 910, 980 or *986. Transitional fitting attachment can be pivot for adjustment to
proper brace angle.
*Not UL listed when used in combination with Fig. 986
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com Eaton.com/tolco
13201 Dahlia Street, Suite 200 Eaton is a registered trademark.
Fontana, CA 92337
United States All other trademarks are property
Phone: 800-851-7415 of their respective owners.