DCS Unit-3 Imp Questions.

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

MSPM’S

YASHWANTRAO CHAVAN INSTITUTE OF POLYTECHNIC,


BEED.
ELECTRONICS AND TELECOMMUNICATION DEPT.
VERY IMPORTANT QUESTIONS
SUBJECT : DCS SUBJECT CODE (22428)
Unit: 3 DIGITAL MODULATION TECHNIQUES (16 Marks)
------------------------------------------------------------------------------------------------------------------------

TWO MARKS QUESTIONS:

a) List different digital modulation techniques.


b) Draw block diagram of DPCM.
c) Write difference between Coherent and Noncoherent modulation technique.
d) Draw Constellation diagram of QAM.
e) Define ASK. & State the bandwidth requirement of ASK.
f) Define PSK. & State the bandwidth requirement of PSK.
g) Define FSK. & State the bandwidth requirement of FSK.

FOUR MARKS QUESTIONS.

a) Describe generation of BASK signal with the help of block diagram.


b) State BW required for BASK, BFSK and BPSK, Also draw waveforms for binary data 10110010 in ASK, FSK,
PSK modulation.
c) Justify that in DPCM system, less number of bits are transmitted than PCM system with the help of block
diagram and relevant waveform.
d) Draw the neat block diagram of QAM system , explain its working.
e) Describe Frequency shift keying (FSK) modulation with suitable circuit diagram.
f) Describe Phase shift keying (PSK) modulation with suitable block diagram.
g) Compare binary ASK, FSK &PSK modulation techniques.
h) Explain QPSK transmitter with block diagram its constellation diagram.

You might also like