Professional Documents
Culture Documents
Eq Doc 10695428 16
Eq Doc 10695428 16
Diagnostic Summary: After connecting a console cable to the supervisor in slot 1 and adding power I was
Please document diagnostic steps able to obtain the boot sequence of the system (see boot sequence,doc)
taken as well as diagnostic tools The system reports as having no startup config found.
used to access asset: I was able to log into the system as admin (no password required) and perform the
following commands on the system and installed components.
NOTE: The fan module in slot 6 does not report as installed. It was moved to slot 3
(serial number 619) to show that it works and that slot 6 could be the issue. The
evidence of this can be found on the show inventory 2.doc.
NOTE: The Line Cards do not show as being installed in the system. They do not
have any lights on the units to show they are working when the system is powered
on.
NOTE: the 8 x PSU’s do not report in the show inventory command, but they are all
installed, and they do all work. The PSUs were removed and replaced in various
slots to prove this.
Cosmetic Summary: The pallet box has a hole in the top of it.
Please document cosmetic The pallet box corner staples have come apart.
condition of asset. There is a large black scuff mark on the side of the pallet box.
Include exterior and interior
summary: One the same side there are a couple of dent marks in the box.
The chassis is badly damaged. It leans from left to right.
Everything installed in the chassis is also twisted from left to right.
The system powers on successfully.
There are 2 PSU blanks stuck at the wrong angle and cannot be removed.
Title: SalvageSale Asset Audit, Inventory & Testing Report | File Name: SalvageSale Asset Audit Denver.doc | Author: Jonathan Stopp
PWR-D1-3041-AC-BLUE
The PSU in slot 3 is damaged. It can be removed and replaced. The remaining
PSUs are undamaged. They can be removed and replaced with out issue.
7800-SUP1A
These units are undamaged. They can be removed without issue
Receiving & Storage Description: Covenco Inc, Denver, 80239
Packaging, Weights 1 x pallet @ 750lbs
& Descriptions 51 x 24 x 38 (H) inches
Country of Manufacture USA
Title: SalvageSale Asset Audit, Inventory & Testing Report | File Name: SalvageSale Asset Audit Denver.doc | Author: Jonathan Stopp