Professional Documents
Culture Documents
SL15065 40250BC
SL15065 40250BC
Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened
raw sewage.
The pump is designed for intermittent and continous operations in submerged installation. The revolutionary S-tube®
impeller provides free spherical passage of solids up to 50 mm and is suitable for wastewater with a dry matter
content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and easy disassembly of the
pump from the motor unit for service and inspection. No special tools are required. Pipework connection is via a DIN
flange.
The pump is designed for speed-controlled operation to keep the energy consumption at a minimum.
To avoid the risk of sedimentation in the pipes, we recommend that you operate the speed-controlled pump within a
speed range of 30 % to 100 % and at a flow rate above 1 m/s.
Controls:
Moisture sensor: with moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Liquid:
Liquid temperature range: 10 .. 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Actual calculated flow: 5.4 l/s
Maximum flow: 19.4 l/s
Resulting head of the pump: 22.34 m
Type of impeller: S-TUBE
Maximum particle size: 50 mm
Primary shaft seal: SIC/SIC
Approvals on nameplate: CE EN12050-2
Curve tolerance: ISO9906:2012 3B2
Rated speed: 2930 rpm
Materials:
Pump housing: Cast iron
EN 5.1301 EN-GJL-250
Impeller: Cast iron
EN 5.1301 EN-GJL-250
Motor: EN-GJL-250
Electrical data:
Power input - P1: 4.9 kW
Rated power - P2: 4 kW
Mains frequency: 50 Hz
Rated voltage [V]: 3 x 400-415 V
Voltage tolerance: +10/-10 %
Max starts per. hour: 20
Rated current: 8.2 A
Starting current: 86 A
Cos phi - power factor: 0.88
Cos phi - p.f. at 3/4 load: 0.83
Cos phi - p.f. at 1/2 load: 0.77
Rated speed: 2930 rpm
Motor efficiency at full load: 86.2 %
Motor efficiency at 3/4 load: 85.3 %
Motor efficiency at 1/2 load: 83.2 %
Number of poles: 2
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): H
Explosion proof: no
Length of power cable: 10 m
Cable type: LYNIFLEX
Others:
Net weight: 115 kg
25 100
20 80
15 60
10 40
5 20
Eta pump = 42 %
Eta pump+motor = 35.7 %
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Q [l/s]
P NPSH
[kW] [m]
P1
4 20
P2
3 15
2 10
1 5
P1 = 3.314 kW
P2 = 2.814 kW
NPSH = 1.53 m
0 0
Motor: EN-GJL-250 P2
Installation: 3 15
DN65
18
x
145
M16
x
4
145
407
227
69
677
379
200
Installation: Vertical
Auto-coupling: 96090992 145
Liquid:
Liquid temperature range: 10 .. 40 °C
677
Selected liquid temperature: 20 °C
DN65
Density: 998.2 kg/m³
Electrical data: 69
145
Power input - P1: 4.9 kW 227
407 4 x 18 DN65
Description Value
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): H
Explosion proof: no
Built-in motor protection: PTC
Length of power cable: 10 m
Cable type: LYNIFLEX
Controls:
Control box: not included
Moisture sensor: with moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Others:
Net weight: 115 kg
200
379
145
4 x M16
677
DN65
69
145
227
407 4 x 18 DN65
555
375
81
1.5
175
DN65
774
552
460
97
266
4XM16 1
210
95
140
742
519.5
270
19
65
807
358
130
325
1
Flow (%) 100 25 100
20 80
15 60
10 40
5 20
Eta pump = 42 %
Eta pump+motor = 35.7 %
0 0
0 2 4 6 8 10 12 14 16 18 Q [l/s]
P NPSH
[kW] [m]
P1
4 20
P2
2 10
P1 = 3.314 kW
P2 = 2.814 kW
NPSH = 1.53 m
0 0
Load profile
1
Flow (%) 100
Time (h/a) 1000
200
25 100
379
20 80
145
15 60
4 x M16
10 40
5 20 677
2 10
P1 = 3.314 kW
P2 = 2.814 kW
NPSH = 1.53 m
0 0