Professional Documents
Culture Documents
Bucket Selection Guide Supplemental Specifications
Bucket Selection Guide Supplemental Specifications
Bucket Selection Guide Supplemental Specifications
7.0
(9.2) Change in operating Change in static tipping Change in static tipping
Description
6.5
(8.5)
weight kg(lb) load-straight kg(lb) load-40o turn kg(lb)
m3(yd3)
(7.2)
29.5-25 28PR L5 +1,240 (+2,734) +960 (+2,160) +850 (+1,870)
5.0
(6.5) 29.5 R25 XHA* +500 (+1,102) +390 (+860) +340 (+750)
4.5
(5.9)
With Tier 3 Engine installed
4.0
(5.2)
1,400 1,600 1,800 2,000 2,200 2,400 kg/m3
STANDARD EQUIPMENT
Electrical system - transmission gear range indicator Automatic climate control 3 operating mode temperature sensing type
Alternator, 70A - job time and distance - air conditioner & heater (power / standard / econo)
Alarms, audible and visual - temperature(coolant, hydraulic - defroster Fan guard Others
- air filter clogging oil, t/m oil) - intermittent wiper and washer, Fuel / water separator Articulation locking bar
- transmission error Lighting system front and rear Muffler, under hood with large - 5.1㎥ Cutting edge, bolt-on type
- alternator voltage - 1 LED dome lights - personal storage space: exhaust stack Coolant level sight gauge
- brake oil pressure - 2 stop and tail lights Console box Rain cap, engine air intake Counterweight
- engine oil pressure - 4 turn signals Holder, can and cup Radiator Door and cab locks, one key
- parking brake - brake lights (counterweight) Rear view mirrors (1 inside) Starting aid (air intake heater) Doors, service access (locking)
- fuel level - 2 head lights on front tower Rear view mirrors (2 outside) Drawbar with pin
- hydraulic oil temperature - 2 working lights on front roof 2'' static seat belt & mechanical Power Train Engine oil level dipstick gauge
- coolant temperature - 2 working lights on grill suspension seat with armrests Brakes : Service, enclosed wet-disc Ergonomically located and slip
- service brake oil pressure Switches Steering column, tilt Differentials resistant, left & right
Alarm, back-up - clutch cut-off Steering wheel with knob Parking brake - handrails
Batteries, 1,315 CCA, 12V, (2) - hazard Roller type sunshade (front Torque converter - ladders
Gauges - lgnition key, start/stop switch window) Transmission, computer- - platforms
- engine coolant temperature - main light(illumination and Tinted safety glass controlled, - steps
- fuel level head light) Two door cab electronic soft shift, auto-shift and Fenders (front / rear)
- hydraulic oil temperature - parking Magazine pocket kick-shift features included Guard, bucket cylinder rod
- speedometer - rear wiper & washer Pedals Transmission oil cooler Hydraulic oil level sight gauge
- transmission oil temperature - work light - one accelerator pedal Lift and tie-down hooks
- voltmeter - battery master switch - one brake pedal Hydraulics Loader linkage, sealed
Horn, electric Starter, electric Radio/USB player Bucket positioner, automatic Z-Bar design
Indicator lights Starting and charging system(24-volt) Rubber floor mat Diagnostic pressure taps Tires(29.5-25, 22PR,L3)
- clutch cut-off Wrist rest Hydraulic oil cooler Transmission oil site level
- high beam Cab Hydraulic system, Vandalism protection caplocks
- turn signal ROPS(ISO 3471) / FOPS(ISO 3449) Engine - 2 spool, single lever, pilot control
LCD Display (sound suppressed and Antifreeze for boom and bucket actuation
- clock and fault code pressurized) with : Engine, Cummins QSM11 Steering, load-sensing
- operating hour counter - cigar lighter - Low Emission Diesel, Tier3 Remote cooling fan,
- engine rpm - coat hook Engine enclosure, lockable hydraulically-driven,
OPTIONAL EQUIPMENT
24-volt to 12-volt DC converter - Pallet Fork, Pin on type Extra piping for auxiliary function adjustable mechanical Tool kit
Additional, 4 working lights Secondary steering system 3rd spool for auxiliary function suspension Wheel chock
on front/rear roof Fire extinguisher Mud guard - 3'' retractable seat belt & Pre-cleaner, engine air intake
Beacon light, rotating Finger tip lever - 2 spool Heated rear view mirrors adjustable air suspension (heated) License plate & lamp
- 4.8㎥ 2 piece tooth, bolt-on type Finger tip lever - 3 spool (2 outside) Steering column, tilt and telescopic HI-Mate
- 5.2㎥ 2 piece tooth, bolt-on type 2 Lever(Joystick) - 3 spool Reversible cooling fan Roller type sunshade(Rear window) (Remote Management System)
- 5.4㎥ Cutting edge, bolt-on type Guard Ride control system Tires : - Mobile / Satellite
- 5.6㎥ 2 piece tooth, bolt-on type - Transmission Seat - 29.5 - 25,22PR L3 Rearview camera
- 5.8㎥ Cutting edge, bolt-on type - crankcase - 2'' static seat belt & - 29.5 - 25, 28PR L3 Heavy duty axle (Front, Rear)
- 6.7㎥ 2 piece tooth, bolt-on type High lift arrangement with adjustable mechanical - 29.5 - 25, 28PR L5 Hyd, lock differential (Front)
- 7.0㎥ Cutting edge, bolt-on type Optional counterweight suspension - 29.5 R25 L3 Fuel warmer
- 4.8㎥ Spade nose & segment, rock 1,750kg (3,860lb) - 2'' static seat belt & - 29.5 R25 XHA* Auto grease system
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.
All imperial measurements rounded off to the nearest pound or inch.
PLEASE CONTACT
Machine Walk-Around
Reliable Main Components
Engine Technology
Well Proven, reliable, fuel efficient, low noise Cummins Tier-lll QSM11 engine.
3 Engine operating mode (Power / Standard / Econo)
Axle
Wheel speed wet disc brake
Improved Durability
Long-life cooling system, designed for additional durability, resistant to thermal shock,
impulse and vibration.
Improved Convenience
Increased cooling & heating capacity with fully automatic climate control system.
Tilting & telescopic steering column.
Adjustable wrist rest for reduced operating stress.
Multiple storage compartments.
AM/FM Radio with MP3 interface and USB input.
Improved ladder with 20 Degree incline and large, deep tread, non-slip steps for safer access
and exit from the cab.
Serviceability
Reversible, swing-out, cooling fan for easy service and improved cooler maintenance.
Ground level access to critical service points, filters and sight gauges for easy maintenance.
2/3
Operator Comfort
In the 9S series cabin you can easily adjust the steering column and wrist rest to best suit
Operating a 9S series wheel loader is unique to Operator Comfort your preferred comfort level. Pilot-operated joystick controls are easy and comfortable to
operate. Roller type sunshades on the front window allow the operator to reduce glare
every operator. Operators can fully customize
and improve visibility. Heated side mirrors feature built-in hot wires for quick defrosting during cold weather conditions.
their work environment and operating
preferences to fit their individual needs.
40˚ 80mm
Wrist rest Joystick lever Front sunshade Side mirrors AM/FM Radio with
MP3/ AC control
Reduced Stress
Work is stressful enough. Your work environment should be stress free. Hyundai's 9S series cabin offers lots of amenities,
additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the
operator with optimum air temperature. An advanced audio system with AM/FM stereo with MP3 interface and USB input,
plus remotely located controls is perfect for listening to music favorites.
15o
Horizontal
Total : 30o
4/5 4/5
Precision & Performance
Innovative hydraulic system technologies make the 9S series wheel loader fast, smooth and
easy to control. 9S series wheel loaders are designed for maximum performance to keep the
operator working productively.
Improved Durability & Reliability
An enhanced axle improves driving over variable ground conditions. Sincered brakes discs
reduce service time and improve brake reliability and performance. Service and clean-out
are easier on the 9S series, now equipped with a completely redesigned, parallel-mounted,
cooler configuration and non louvered fins to prevent clogging. All coolers are designed
with aluminum bar plate configuration and undergo strict factory tests for thermal shock,
impulse and vibration to assure long term durability. Top mounted non-louvered aluminum
air condenser and variable displacement A/C compressor are designed for maximum
cooling capacity, energy savings and easy clean-out.
The CUMMINS QSM11 electronic control engine combines full- Fully automatic transmission designed for maximum durability,
authority electronic controls with the reliable performance. Minimum power loss, improved travel speed and low noise.
The combination of improved airflow and evenly dispersed fuel Improved clutch control and minimized shifting shock when
results in increased power, improved transient response and traveling, contribute to a smoother ride. Error messages and
reduced fuel consumption. And the QSM11 uses advanced transmission fault history are recorded and accessible through
electronic controls to meet the emission standards. the monitor.
(EPA Tier-3, EU StageIII-A)
6/7
Profitability
9S series is designed to maximize profitability through improved efficiencies,
enhanced service features and longer life components.
Hydraulic Oil
(5,000 hr)
8/9
Specifications & Dimensions
ENGINE HYDRAULIC SYSTEM BRAKES STEERING SYSTEM
Maker/Model CUMMINS QSM11 Type Open centered tandem circuit system Service Brakes Hydraulically actuated, wet disc Type Full hydraulic power steering
brakes actuate all 4 wheels
Watercooled, 4-cycle, turbocharged, Pump Gear 529 lpm Pump Gear, 292 liters/min
Type independent axle-by-axle system.
charge aircooled direct injection, (77.1 gal/min)
139.7 gpm Wheel speed brake.
electronic controlled diesel engine
Relief Valve Setting 210 kg/cm2 (2,990 psi)
Control valve 2 Spool (Bucket, Boom) Parking Brake Spring-applied, hydraulically released
Gross power 348HP (260 kW) / 2,000rpm
disc brake on transmission output Cylinder Type Double acting
3 Spool (Bucket, Boom, Aux)
Net power 331HP (247 kW) / 2,000rpm Bore x Stroke 110mm (4.1") x 480mm (18.9")
Pilot pressure controled type Emergency Brake When brake oil pressure drops,
Max. power 365HP (272 kW) / 1,800rpm indicator light alerts operator and Steering Angle 40o(each direction)
System pressure 210 kgf/cm (2,990 psi)
2
parking brake automatically applies.
Maximum torque 171kg.m (1,235 lb.ft) / 1,400rpm Features
Bucket Type Pilot operated lift and tilt circuit, - Center-point frame articulation.
No. of cylinders 6 Controls single-lever(joystick) control standard. - Load-sensing, flow amplified system.
Bore x Stroke 125 mm (4.9”) x 147 mm (5.8”) - Tilt and telescopic steering column.
Lift Circuit The valve has four functions ;
Displacement 10.8ℓ(660 cu in) raise, hold, lower and float. SERVICE REFILL CAPACITIES
Can adjust automatic kickout from
Compression ratio 16.3 : 1
horizontal to full lift. Fuel tank 450 liters (118.8 USgal) Front axle 58 liters (15.3 USgal)
Air cleaner Dry, Two stages dual elements
Tilt Circuit The valve has three functions ; Cooling system 65 liters (17.2 USgal) Rear axle 58 liters (15.3 USgal)
Alternator 24V, 70 Amp tilt back, hold and dump. Crankcase 38 liters (10.0 USgal) Hydraulic tank 230 liters (60.8 USgal)
Battery 2 x 12V, 220 Ah. Can adjust automatic bucket
Transmission 43 liters (11.4 USgal) Hydraulic system (including tank) 336 liters (88.8 USgal)
positioner to desired load angle.
Starting motor 24V, 7.8kW
Cylinder Type : Double acting OVERVIEW TIRES
※No derating for continuous operating required up to 2,438m (8,000ft). Lift, bore x stroke
This engine meets the EPA(Tier III) / EU(Stage III-A) Emission regulation. 2-200 mm (7.0") x 863 mm (34.0") Description UNIT HL780-9S HL780XTD-9S Type Tubeless, loader design tires
Tilt, bore x stroke Operating weight kg (lb) 29,500 (65,040) 30,200 (66,580)
Standard 29.5-25, 22 PR, L3
HL780-9S 2-160 mm (5.5") x 580 mm (22.6") Heaped m3(yd3) 5.1 (6.7) 5.1 (6.7)
TRANSMISSION Bucket capacity
HL780XTD-9S 2-160 mm (5.5") x 570 mm (25.4") Struck m3(yd3) 4.3 (5.6) 4.3 (5.6) Options include 29.5-25,22PR L3
Breakout force-bucket kg (lb) 24,820 (54,720) 23,880 (52,650) 29.5-25, 28 PR, L3
3-elements, single-stage Cycle Time Raise : 6.7 sec (with load)
Torque converter type Straight kg (lb) 23,940 (52,780) 21,660 (47,750) 29.5-25, 28 PR, L5
Double-phase Dump : 1.4 sec Tipping load 29.5 R25 L3
Full turn kg (lb) 20,770 (45,790) 18,660 (41,140)
Tire 29.5-25, L3 Lower : 3.0 sec (empty) 29.5 R25 XHA*
Total : 11.1 sec
※Full automatic power shift, countershaft type with soft-shift in range and
direction. Properly matched torque converter to engine and transmission DIMENSIONS
for excellent working ability
AIR CONDITIONING SYSTEM
Travel speed km/h (mph)
The air condition system for the machine contains the fluorinated
Forward 1st 6.1(3.8) greenhouse gas with global warming potential of R134a.
11.5 (7.1) (Global Warming Potential : 1430) M M
2nd
The system hold 0.85kg refrigerant consisting of a CO2 equivalent 1.22kg E E B B
3rd 18.0 (11.2) metric tonne. For more information, Please refer to the manual.
F F
4th 36.5 (22.7) K K
A L A L J J
Reverse 1st 6.1 (3.8)
C C G G H H
3rd 25.0 (15.5) N N
D D
Description
UNIT HL780-9S HL780XTD-9S Description
UNIT HL780-9S HL780XTD-9S
AXLES
Bucket Type General purpose bolt-on cutting edge G. Front overhang mm (ft-in) 3,080 (10’ 1”) 3,510 (11’ 6”)
Drive system Four-wheel drive system A. Dumping clearance at max. H. Wheelbase mm (ft-in) 3,700 (12’ 2”) 3,700 (12’ 2”)
mm (ft-in) 3,300 (10’ 10”) 3,720 (12’ 2”)
height and 45o dump angle. I. Ground clearance mm (ft-in) 495 (1’ 7”) 495 (1’ 7”)
Mount Rigid front axle and oscillating rear axle
B. Reach
Full lift mm (ft-in) 1,365 (4’ 6”) 1,430 (4’ 8”) J. Height over exhaust mm (ft-in) 3,720 (12’ 2”) 3,720 (12’ 2”)
o o
Rear axle oscillation ±13 (total 26 ) 7ft height mm (ft-in) 2,070 (6’ 9”) 2,440 (8’) K. Height over cab mm (ft-in) 3,880 (12’ 9”) 3,880 (12’ 9”)
C. Digging depth mm (in) 95 (3.7”) 110 (4.3”) L. Roll-back angle (on ground/at carry) deg 42 / 48 42 / 49
Hub reduction Planetary reduction at wheel end on ground mm (ft-in) 9,475 (31’ 1”) 9,970 (32’ 9”) M. Dump angle deg 47 47
D. Overall length
Differential Conventional at carry mm (ft-in) 9,400 (30’ 10”) 9,920 (32’ 7”) Clearance circle mm (ft-in) 15,170 (49’ 9”) 15,580 (51’ 1”)
E. Overall height (fully raised) mm (ft-in) 6,160 (20’ 3”) 6,590 (21’ 7”) with bucket mm (ft-in) 3,450 (11’ 4”) 3,450 (11’ 4”)
Reduction ratio 27.0 N. Overall width
F. Bucket pivot max. height mm (ft-in) 4,510 (14’ 10”) 4,930 (16’ 2”) without bucket mm (ft-in) 3,220 (10’ 7”) 3,220 (10’ 7”)
10/11