Professional Documents
Culture Documents
Automotive10 Quarter 1 Week 1 & 2
Automotive10 Quarter 1 Week 1 & 2
Department of Education
Cordillera Administrative Region
EASTERN BONTOC NATIONAL AGRICULTURAL & VOCATIONALHIGH
SCHOOL
Lingoy, Barlig, Mountain Province
AUTOMOTIVE SERVICING
Quarter 1 Week 1 & 2
LEARNERS INFORMATION:
IGNITION SYSTEM – In the spark-ignition engine, the system that furnishes high voltage
spark to the cylinders, at the proper time, to fire the compressed air-fuel mixture in a gasoline
engine 4-stroke cycle.
The ignition system light connection – From the battery positive to primary fuse box to the
ammeter positive sign, and from the negative sign of the ammeter connected to ignition switch B.
ACC and ON terminal in the ignition switch is connected to the secondary fuse.
HORN CIRCUIT – Is a circuit use to warn pedestrian and other motorist. It is also used for
signaling as emergency purposes.
Auto Electrical basic Tools and Equipment
2
4. Connect the wiring harness to all circuits.
5. Test the electric circuits.
Procedures in connecting Ignition circuit:
1. Prepare the necessary tools and materials needed.
2. Connect the positive terminal of the battery to ammeter positive (+). The other terminal of the
battery negative (-) is connected to the vehicle body that serve as ground.
3. The negative terminal of the ammeter is connected to the (B) terminal in the ignition switch.
4. ACC/Accessories is connected to the primary fuse.
5. ON is connected to the secondary fuse.
6. STR/Starter switch connection.
2. Connect the 86 terminal of horn relay to the push button switch. The other terminal of the push
button switch is connected to the ground.
3. Splice the wires of 30 and 85 terminals of horn relay and connect them to the fuse load terminal.
Connect the other end of the fuse source terminal to the IG or ACC terminal of the ignition switch.
4. From the B terminal of the ignition switch, connect a wire to the terminal of the ammeter. The
other terminal wire of the ammeter is connected to the positive (B+) terminal of the battery.
5. Connect the negative terminal of the battery to the vehicle body that serve as ground.
Reminder:
The connection can be made in a reverse manner from step 5 to step 2 except step 6 which is
usually done after checking the wiring connections.
SUPPLIES AND MATERIALS
• Soldering lead
• Safety glasses
• Soldering iron
• Electrical tapes
• Wire terminal
• Wires
TOOLS
• Philip screwdrivers
• Standard screwdrivers
• Electrical pliers
• Wrenches (socket and ratchet)
• Soldering gun
EQUIPMENT
• Battery (12volts)
• Electrical mock-up/Vehicle
3
TLE_IAAUTO9-12RREE-IIIa-51
Direction/ Instructions: Lets connect the ignition circuit following the proper steps and
procedures.
4
Direction: Lets connect the horn circuit following the correct procedures.
5
Activity 3.
Directions: Write the supplies, materials, tools and equipment needed in Ignition and Horn
Circuit diagram.
Supplies and Materials Tools
• .
• .
• .
• .
• .
•
Equipment
•
•
Guide Questions:
1. What is the purpose of the ignition system on the electrical wiring of the vehicle?
_______________________________________________________________________
______________________________________________________________________.
2. What is a horn circuit?
______________________________________________________________________
_______________________________________________________________________________________.
6
Directions: This checklist determines your level of knowledge and mastery about wiring the
ignition and horn circuit. Accomplish the following checklist.
I can do
I cannot do I am this but I I can do
this yet. learning need to this very
COMPETENCY how to do learn more well.
this. and (4)
(1) (2) improve. (3)
8-12 13-16 17-19 20
Stipes the wires
correctly.
Connect the wires
properly.
Checks the quality of
works.
Uses the
tools/materials and
equipment
appropriately.
Observes safety
measures in wiring
the ignition and horn
circuit
LEGEND:
20 - Advance
17 - 19 - Proficient
13 - 16 - Approaching Proficiency
8 - 12 - Developing
Reference for learners: TESDA CBLM- Service ignition system and horn circuit
Automotive textbook
Answer Key
Activity 3
Activity 1 and 2 Supplies and Materials
• Soldering lead
• Safety7 glasses
• Wires
Tools
• Electrical pliers
Answer may vary
Prepared by:
Glenworth C. Pinos-an
Writer