Professional Documents
Culture Documents
Summary of Changes: Location Change
Summary of Changes: Location Change
The 2004 Edition of this Code contains revisions in addition to the 2001 Edition with 2002
and 2003 Addenda. The revisions are identified with the designation 04 in the margin and,
as described in the Foreword, become mandatory six months after the publication date of the
2004 Edition. To invoke these revisions before their mandatory date, use the designation
“2004 Edition” in documentation required by this Code. If you choose not to invoke these
revisions before their mandatory date, use the designation “2001 Edition through the 2003
Addenda” in documentation required by this Code.
Changes given below are identified on the pages by a margin note, 04, placed next to the
affected area.
Page Location Change
iii List of Sections Updated to reflect 04
xi Foreword Editorially revised
1 Statement of Policy Added
6–9 Table 1A, Line 28 For Section VIII, Division 1, Carbon steel
SA-765 I added
10–13 Table 1A, Line 26 For Sections I and VIII-1, for SA/AS 1548
7-430, reference to previously deleted
Note G37 deleted (current G37 is due to
renumbering of G43 as G37)
14–17 Table 1A, Line 1 For I and VIII-1, for SA/AS 1548 7-460,
reference to previously deleted Note G37
deleted (current G37 is due to
renumbering of G43 as G37)
Table 1A, Lines 11 & 12 For Sections III and VIII-1, SA-350 LF2 split
into separate lines for Classes 1 and 2
Table 1A, Line 18 For VIII-1, for SA-765 II, Max. Temperature
Limit revised, Notes G10 and T2 added,
and stress line extended
18–21 Table 1A, Line 9 For I and VIII-1, for SA/AS 1548 7-490,
reference to previously deleted Note G37
deleted (current G37 is due to
renumbering of G43 as G37)
58–61 Table 1A, Line 1 For VIII-1, for 23⁄4Ni–11⁄2Cr–1⁄2Mo SA-543 C
Class 3, P-No. and Group No. revised
Table 1A, Line 9 For VIII-1, for 3Ni–13⁄4Cr–1⁄2Mo SA-543 B
Class 3, P-No. and Group No. revised
Table 1A, Lines 20 & 21 For III and VIII-1, 31⁄2Ni SA-350 LF3 split into
separate lines for Classes 1 and 2
Table 1A, Line 30 For VIII-1, for 31⁄2Ni–13⁄4Cr–1⁄2Mo–V SA-508
4N Class 2, P-No. and Group No. revised
78–81 Table 1A, Lines 19 & 20 For VIII-1, for 18Cr–8Ni SA-182 F304L, Max.
Temperature Limit revised and stress line
extended
xxvii
--```,,`,`,````,`,``,`,,``,```,-`-`,,`,,`,`,,`---
Table 1A, Lines 23–28 For VIII-1, for SA-182 F304L, SA-213
TP304L, and SA-240 304L, Max.
Temperature Limit revised and stress line
extended
Table 1A, Lines 30–35 For VIII-1, for SA-249 TP304L and SA-312
TP304L, Max. Temperature Limit revised
and stress line extended
Table 1A, Line 36 For III, for SA-358 304L, Note W12 added
Table 1A, Lines 39 & 40 For VIII-1, for SA-479 304L, Max.
Temperature Limit revised and stress line
extended
82–85 Table 1A, Lines 2 & 3 For VIII-1, for SA-688 TP304L, Max.
Temperature Limit revised and stress line
extended
110–113 Table 1A, Lines 16 & 17 For VIII-1, 18Cr–10Ni–Ti SA-240 321H
added
170–173 Table 1B, Lines 33 & 34 For I, for C10200 060 SB-75 and O61 SB-42,
Note G4 deleted
xxviii
--```,,`,`,````,`,``,`,,``,```,-`-`,,`,,`,`,,`---
xxix
--```,,`,`,````,`,``,`,,``,```,-`-`,,`,,`,`,,`---
238–241 Table 1B, Lines 19 & 20 For VIII-1, N10665 Solution ann. SB-462
added
Table 1B, Lines 32 & 33 For VIII-1, N10675 Solution ann. SB-462
added
242–245 Table 1B, Lines 34 & 35 For VIII-1, R31233 Solution ann. SB-815 and
SB-818 added
Table 1B, Lines 36–39 For I, R50250 Annealed SB-265, SB-338, and
SB-348 added
246–249 Table 1B, Lines 3 & 4 For I, Annealed SB-861 and SB-862 added
Table 1B, Lines 6–9 For I, R50400 Annealed SB-265, SB-338, and
SB-348 added
Table 1B, Lines 12 & 13 For I, Annealed SB-861 and SB-862 added
Table 1B, Lines 15–18 For I, R50550 Annealed SB-265, SB-338, and
SB-348 added
Table 1B, Lines 21 & 22 For I, Annealed SB-861 and SB-862 added
Table 2A, Lines 17 & 18 (1) For VIII-2, SA-213 T91 and SA-335 P91
added
(2) For III, Note H6 deleted
xxx
--```,,`,`,````,`,``,`,,``,```,-`-`,,`,,`,`,,`---
410 Table 3 (1) General Note (b) deleted
(2) Note G13 redesignated as G1
423 Table 4 Note G6 deleted
464, 465 Table U, Line 17 18Cr–10Ni–Cb SA-213 TP347HFG added
470, 471 Table U, Line 30 For 24Cr–10Ni–4Mo–N SA-995 2A, Spec
No. and Grade revised (formerly SA-351
CE8MN)
Table U, Line 33 For 25Cr–5Ni–3Mo–2Cu SA-995 1B, Spec
No., Grade, and UNS No. revised
(formerly SA-351 CD4MCu)
480, 481 Table U, Line 5 N06022 Solution ann. SB-462 added
Table U, Line 13 N06030 Solution ann. SB-462 added
Table U, Lines 36–40 N06200 Solution ann. SB-366, SB-462,
SB-564, SB-574, and SB-575 added
482, 483 Table U, Lines 1–3 Solution ann. SB-619, SB-622, and SB-626
added
484, 485 Table U, Lines 5–10 N06686 Solution ann. SB-564, SB-574,
SB-575, SB-619, SB-622, and SB-626
added
486, 487 Table U, Lines 25–29 N08366 Annealed and Sol. treat. SB-691,
SB-675, SB-676, SB-690, and SB-688
deleted
488, 489 Table U, Line 28 N08825 Annealed SB-564 added
490, 491 Table U, Lines 1 & 7 For N10001 Annealed SB-333, Product Form
revised
Table U, Line 12 N10276 Solution ann. SB-462 added
Table U, Line 31 N10665 Solution ann. SB-462 added
Table U, Line 38 N10675 Solution ann. SB-462 added
xxxi
xxxii
xxxiii
--```,,`,`,````,`,``,`,,``,```,-`-`,,`,,`,`,,`---
818–821 Nonmandatory Appendix B Added
822–826 Nonmandatory Appendix C Added
xxxiv
xvi