Bill of Quantity For The Work" Washing, Painting and Repair of Temple Near SVM School BOCM Colony Under GM Unit, Piparwar Area W

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Billof Quantity for the Work" Washing, painting andrepair of Temple near SVM school BOCM colony under

GM Unit, Piparwar Area W


Serial
No.
Description of Work Quantity Unit SOR Rate Updated Rate Updated
Amount Remarks
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
1
|including disposalof rubbish to the dumping ground within 50 metres lead. (+) 12 mm 50.00 sqmtr 169.50 233.88 11694.00 15.56 (+)
cement plaster of mix :1:6 (1 cement: 6 fine sand) 13.1.2
12 mm cement plaster finished with afloating coat of neat cement of mix : 1:4 (1
2 30.82 sqmtr 203.25 267.25
cement: 4 fine sand) 8236.65 13.7.2
3
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement:2
1.40 Cum 5570.55 6092.31 8529.23 22.14.1
coarse sand :4 graded stone aggregate 20 mm nominal size)
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five
|layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre
matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm
by the same membrane manufactured of density at 25°C, 3.87 -0.89 kg/litre and
viscocity 70- 160 cps. Over the primer coat the layer of membrane shall be laid using
|butane torch and sealing alljoints etc., and preparing the surface complete. The vital
physical and chemical parameters of the membrane shall be as under: Joint strength in 58.40 sqmtr 407.50 427.49 24965.42 22.19.1:
|longitudinal and transversse direction at 23C as 350/300 N/5 cm. Tear strength in
|longitudinaland transverse direction as 60/80N. Softening point of membrane not less
than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D
5147. The laying of membrane shall be got done through the authorised applicator of
the manufacturer of membrane: 3 mm thick

Structural steel work in single section, fixed with or without connecting plate, including
5 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer 19.25 kg 67.70 81.46
all complete. 1568.11 10.1

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron
6
and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer Using flats 1.615 sqmtr 2906.65 3057.75 4938.27 10.5.2 DR
30x6mm for diagonal braces and central cross piece
|Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to
|IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 24.00 mtr 231.65 247.68 5944.32 12.41.2
mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

|Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including
jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal 8.00 each 161.55 114.60 916.80 12.42.5.2
Jexpansion: Bend 87.5° 110 mm bend
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
specified by the manufacturer) of 1st quality conforming (thickness to be
to IS:15622 of approved
make in colours such as White, Ivory, Grey, Fume Red Brown, laid on
|cement mortar 1:4 (1 Cement :4 Coarse sand), including pointing the 20 mm thick
176.64 sgmtr 785.40 774.31
joints with white 136774.12 11.37
Jcement and matching pigment etc, complete.
10 Distempering with oilbound washable distemper of approved brand and manufacture
to give an even shade : Old work (one or 823.06 sqmtr 32.00
more coats) 47.83
39366.96 14.45.1
11 Finishing walls with AcrylicSmooth exterior paint of required shade :Old
more coat applied @ 1.67 Itr/ 10sqm) on existing work (Two or
687.70 sqmtr 67.30 87.04
cement paint surface 59857.41 14.66.1
12 Painting with synthetic enamel paint of approved brand and
colour to give an even manufacture of required
shade:One or more coats on old work 421.46 Sgmtr 48.50 73.11 30812.94 14.54.1

13 Clearing grass and removal of the rubbish upto a distance of 50 m


periphery of the area cleared. outside the
2000.00 sqmtr 3.286 5.0135 10027.00 2.32

14 Carriage of Earth by mechanical transport including loading,unloading and stacking


(lead upto 1 KM). 25.00 Cum 99.44 118.85 2971.25 1.1.2.4
Providing and laying vitrified floor tiles in different sizes
15 the manufacturer) with water absorption less (thickness to be specified by
than 0.08% and conforming to IS:15622,
lof approved make, in all colours and shades, laid 63.92 sqmtr 1405.95 1270.00 81178.40
on 20mm thick cement mortar 1:4 (1 11.41.2

|Providing and fixing unplasticised -PVC pipe clips of approved design to


16 water pipes by means of 50x50x50 mm hard wood plugs, unplasticised - PVC rain
screwed with M.S. screws of required 32.00 each
|length, including cutting brick work and fixing in cement mortar 1:4 (1 189.05 228.35 7307.20 12.43.2
and making good the wall etc. complete.: 110 mm cement : 4 coarse sand)

Total 4,35,088.07
GST 18% 78,315.85
Totalwith GST 5,13,403.93

EA(Civil), GM ênit
PE(Civil), GM Unit

Certificates for SOP:


() This work has not been executed inadvance without any
(i) No splitting of work has been done in this proposal and itproper
is a
work order.
complete proposal as per requirement.
Al3]2o29
EA(Civil), GM Unit
proreu a Aa
plas et plas e1(1: 6)

P/patag
3082

8.¢Y,2 A/0s xo 02.


82.2X 2X oNOS X0"02s
|396

Ap.p () 8Sx.2, X2Nos 39

gferc tetval sfeel

lo.3

cd!tomm
kain utit plre xLI Y2 X3 m - 6 m 9 m
-)
3No o Alos
Bend omm ) x u Y 2

o) AcyCi'c paint )
232
GYss

Carrtcge ) s - io tn'p r 2-s= 2rrys

Vetnec le - s Y2:2 2 NOs


92XL 2 y2 ND

piman skistg 3-96 XyNOc xD26 y0ro2


&oy m

63. 92 n

cep dio mm
t.3t.tit.qu.,fuuzTR

OBirendra umor
(3)104kegh Numar
hecelhl.

9)

You might also like