Jontsil Ejt

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Last update on: 18-12-2023

Version: 1

PRODUCT DATA SHEET Surface structure Even textured surface


Tensile strength
JONTSIL™ EJT Lateral (EN-ISO 527-3)
Longitudinal (EN-ISO
4.7 Mpa
4.8 Mpa
JONTSIL EJT is an elastomeric strip for sealing
527-3)
movement-bearing joints and cracks.
Tensile elongation
Specification:
Lateral (EN-ISO 527-3) 580%
JONTSIL EJT is a high-performance, flexible sealing strip Longitudinal (EN-ISO 532%
that can safely transfer transverse and longitudinal 527-3)
movement. It is a superior system for sealing and Tear resistance
waterproofing expansion and connection joints. Lateral (EN-ISO 527-3) 48 Mpa
Longitudinal (EN-ISO 42 Mpa
Uses: 527-3)
 Sealing movement joints and cracks Shore A (ISO 868) 70
 For effectively transferring construction movements Peel strength (DIN >20 Mpa
in basements, Tunnel construction, swimming 16860)
pools, and sewage treatment plants. Colour (RAL-7040) Gray
 Around metal surfaces Water pressure > 5 Bar
 Cable and pipe penetrations strength (EN-1928)
Service temperature -30°C to +80°C
Advantage:
(SIA V280/3+4)
 Excellent resistance to weathering and UV
radiation.
Density 1.4 kg/lit
 Chemically stable UV- resistance (DIN EN >6500 h
 Flexible, permanently elastic ISO 489203)
 Highly versatile
Application procedure:
 Good tensile properties Surface preparation:
 Heat weldable Surfaces must be clean, sound, and dry. All the broken
 Easy to install edges should be repaired with the high-strength ready-made
 Long-term resistance to bacterizes. thixotropic mortar, RIPSTAR 49. All the joints should be
 Non-hazardous for users straight. Surfaces should be free from dust, oil, grease, and
other similar contaminants.
Packaging:
JONTSIL EJT is available in the following standard sizes, Application:
Mix components of two-part, epoxy resin base adhesive,
Width Thickness Length
JONTSIL Tape Adhesive using slow speed drilling machine
150 mm 1 mm / 1.25 mm / 25 m
fitted with a mixing paddle until a uniform mix is obtained.
1.50 mm / 2 mm
Apply adhesive to the prepared substrate on both sides of
200 mm 1 mm / 1.25 mm / 25 m the joint so that the edge width of JONTSIL EJT is embedded
1.50 mm / 2 mm into the JONTSIL Tape Adhesive to at least 40 mm. The layer
250 mm 1 mm / 1.25 mm / 25 m thickness of JONTSIL Tape Adhesive should be
1.50 mm / 2 mm approximately 2 mm. Place JONTSIL EJT of required width
300 mm 1 mm / 1.25 mm / 25 m into fresh JONTSIL Tape Adhesive. Press the strip using a
1.50 mm / 2 mm hand roller or other suitable tool. Ensure there are no air
voids or gaps between the substrate and JONTSIL EJT.
350 mm 1 mm / 1.50 mm 25 m
Apply a second layer of JONTSIL Tape Adhesive on top so
400 mm 1 mm / 1.50 mm 25 m
that JONTSIL EJT is over-coated on a 40 mm edge width.
Apply JONTSIL Tape Adhesive at a width of at least 20 mm
Typical Properties: to cover the ends of JONTSIL EJT and the surface next to it.
Test Specification
Chemical base of the Flexible TPE base
tape polymer
SP CONCARE PVT. LTD.
CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
info@spconcare.com www.spconcare.com Sangli-416416, Maharashtra, (INDIA)
Last update on: 18-12-2023
Version: 1
Storage:
Store under cover, out of direct sunlight and protect from
extremes of temperature. In tropical climates the product
must be stored in an air-conditioned environment.
Safety precautions:
As with all chemical products, care should be taken during
use and storage to avoid direct contact with eyes, mouth,
and foodstuff. Treat splashes to eyes and skin immediately.
If accidentally ingested, seek immediate medical attention.
Keep away from children and animals.

Disclaimer:
Whilst any information contained herein is true, accurate
and represents our best knowledge and experience, no
warranty is given or implied with any recommendations
made by us, our representatives, or distributors, as the
conditions of use and the competence of any labor involved
in the application are beyond our control.

SP CONCARE PVT. LTD.


CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
info@spconcare.com www.spconcare.com Sangli-416416, Maharashtra, (INDIA)

You might also like