Professional Documents
Culture Documents
Cad Procedure Rev 1
Cad Procedure Rev 1
CAD PROCEDURE
BMT PROJECT
5
4
3
2
1 18.10.2016 ISSUE FOR REVIEW NDS AEM CDR
REV. DATE DESCRIPTION CREATE CHECKED APPROVED
Contents
1. General...................................................................................................................................... 3
2. BMT drawing............................................................................................................................. 5
3. Layers........................................................................................................................................ 6
4. Text style................................................................................................................................... 7
5. Dimension style ........................................................................................................................ 8
6. Model space and paper space ................................................................................................ 12
7. Scale ................................................................................................................................. ......
12
8. Drawing
revision ......................................................................................................................12
9. Purge ...................................................................................................................................... 13
10. Plotting ..................................................................................................................................13
1 – General
This document describes the method regarding the creation or modification of digital drawings
according BMT standard.
The purpose of this standard is to create uniform drawings.
On BMT project Autocad 2015 and CADWorx Plant professional 2016 SP2 shall be used.
All system variables are set by default. Any change of these should be made with the approval
of lead/project manager (pay attention on DIMLFAC, DIMDEC and DIMLUNIT- bill of material
lengths are based on these variables!).
At the beginning of the project the users must set:
- insertion scale
-drawing units
-save drawing version
- CADWorx database following instructions of CAD/CAE Administrator
2 – BMT drawing
New drawings will be started from the template files located on address: P:\16029 Karratha
Developing BMT\5 Engineering and Design\5.8 Templates\LAYOUT DWG
These drawings contain the standard settings as described below.
3 – Layers
Every drawing created in order of BMT shall use the following layers:
The layer properties are set with a Color dependent plot style.
All entities shall be drawn with Color = ByLayer.
4 – Text style
a. BMT-2.5
b. BMT-4.0
5 – Dimension style
All the 3d models shall be made in model space (equipments, pipes, supports, HVAC, steel
structure) at scale 1:1.
There is a dedicated layer for each group of elements allocated by the CAD/CAE administrator.
Dimensions, annotations, tables, notes etc. shall be made in paper space.
7 – Scale
8 – Drawing revision
When changes are required to a drawing that has already been issued, the drawing is revised.
Revisions are made with subsequent numbers starting at ‘0’.
A revision cloud shall clearly indicate the changes and shall include a revision triangle.
9 – Purge
To reduce the file size unused item shall be removed from the drawing.
All Non-standard entities shall be purged before the documents are sent to BMT.
10 – Plotting
To ensure the correct line weight on prints, the correct Plot Style shall be used when plotting a
drawing.