Professional Documents
Culture Documents
Coating Procedure - Sop 04 Abrasive Control
Coating Procedure - Sop 04 Abrasive Control
: Coating
004
1. Make sure the abrasive is not stored in water soaked / improper condition
2. Ensure the batch number carries a Test Certificate from the supplier which
indicates – Specific Gravity, Sieve Size, Hardness & Impurities
3. Ensure the grade is G40.
4. Ensure the blasting pot / input line has a sieve / filter to take-out worn-out
particles (min size 0.5 mm or as recommended by the grit mfr.).
Vial Test
REMARKS
CONDUCTOMETER
Checked by : ___________________
K.Deshpande Simran Technocrats I Pvt. Ltd
Prepared by : ___________________
NACE CIP Lev 2, FROSIO Lev 3