Professional Documents
Culture Documents
Eta9742 Eta
Eta9742 Eta
Eta9742 Eta
ETA9742
DESCRIPTION FEATURES
ETA9742 is a switching Li-Ion battery charger capable of Bi-Directional Power conversion with Single
delivering up to 3A of charging current to the battery and also Inductor
capable of delivering up to 5V/2.4A in boost operation, with high Automatic Mode Switching
efficiency in both charging mode and boost mode. It also includes Switching Charger
a fuel gauge system for power indication. For charging, it uses a 5V Synchronous Boost
proprietary control scheme that eliminates the current sense Up to 96% Efficiency
resistor for conventional constant current control, maximizing Up to 3A Max charging current and 2.4A
efficiency, reducing charging time and reducing costs. It can also discharging
output a 5V voltage in the reversed direction by boosting from No-Battery detection
the battery. It only needs a single inductor to provide power bi- No External Sense resistor
directionally with a proprietary automatic mode detect and LEDs for battery level indication and
switch scheme. ETA9742 is an ideal all-in-one solution for battery charge/discharge status indication
charging and discharge applications, such as power banks, smart
phones, and tablets with only one USB port that can be used for
charging battery function. APPLICATIONS
Tablet, MID
ETA9742 is suitable for charging a 4.2V Li-ion battery. And Smart Phone
ETA9742 is in ESOP8 package. Power Bank
TYPICAL APPLICATION
ETA9742
ELECTRICAL CHACRACTERISTICS
(VIN = 5V, unless otherwise specified. Typical values are at TA = 25oC.)
ETA9742
PARAMETER CONDITIONS MIN TYP MAX UNITS
Low side Nmos Rdson ISW =500mA 70 mΩ
Short Circuit Hiccup Current 3.8 A
On Time 45
Short Circuit Hiccup Timer ms
Off Time 2000
o
Charging Thermal Regulation threshold 85 C
o o
Thermal Shutdown Rising, Hys=20 C 150 C
PIN DESCRIPTION
TYPICAL CHARACTERISTICS
(Vin=5V, TA=250C, unless otherwise specified)
In CHARGE MODE, Efficiency Vs Vbat at 2.1A and 3A charge current
100% 100%
99% VIN=5V,ICHARG=3A
VIN=5V,ICHARG=2.1A 98%
98%
97%
96%
96%
Efficiency
Efficiency
95% 94%
94%
92%
93%
92%
90%
91%
90% 88%
3 3.2 3.4 3.6 3.8 4 4.2 3 3.2 3.4 3.6 3.8 4 4.2
Vbat (V) Vbat (V)
ETA9742
In BOOST MODE
5 95%
4 90%
Efficiency (V)
Vout (V)
3 85%
Vin=3.3V Vin=3.3V
Vin=4.0V Vin=4.0V
1 75%
Vin=4.35V Vin=4.35V
0 70%
0 0.5 1 1.5 2 2.5 0 0.5 1 1.5 2 2.5
Iout (A) Iout (A)
APPLICATION SUPPORT
Please contact local distributor or ETA sales representatives for technical support.
PCB GUIDELINES
L, BAT
Inductor Cin,
Next to IC pins Input capacitor,
Next to inductor
and Cout
PGND
Cout,
Output capacitors
Next to IC pins
PCB wire
USB
V+
PCB solder
USB V+
Please have CIN, COUT , and L placed just next to the IC pins so that the power traces are kept to the shortest to achieve
a good performance of ETA9742 and good EMI.
Have CBAT and CUSB placed close to the IC pins and connected to AGND to ensure a clean AGND.
ETA9742
PACKAGE OUTLINE
Package: ESOP-8