Professional Documents
Culture Documents
Clamps Good Hand
Clamps Good Hand
Distributed by:
www.goodhandinc.com
• All die-stamped steel parts are deburred, Hand grips are covered with
cleaned, and zinc-plated for a finish that an oil and stain resistent red
resists corrosion and creates a smooth, easy vinyl or red plastic for easy
to clean surface. identification and to assure
the safety and comfort of the
• Toggle mechanism designed to allow
operator.
maximum clearance for ease of loading and
unloading work-pieces.
GH-12205
TOGGLE ACTION
The theoretical maximum holding of clamping force of a toggle action device is achieved when
the three pivot points are in a straight line. To make allowance for external forces due to
vibration and changing load conditions in industrial use, the proper amount of over travel of
the center pivot point has been carefully calculated to yield maximum clamping pressure, while
achieving a positive locking position.
NOTE: Engineering changes, dimensions and specifications referenced in this catalog are subject to change without notice.
Long U-Bolt UN
IQU
Look for this logo throughout our catalog to see our
E
clamps with unique features such as:
Side Mount
INDEX
GOOD HAND DE-STA-CO CARR LANE PAGE GOOD HAND DE-STA-CO CARR LANE PAGE GOOD HAND DE-STA-CO CARR LANE PAGE
Vertical Handle Toggle Clamps Horiztonal Handle Toggle Clamps (cont.) Push/Pull Toggle Clamps (cont.)
101-A 201-U CL-150-VTC 1 201-SS 205-USS CL-250-HTC-S 10 303-EK - - 25
101-AI 201-B CL-151-VTC 1 201-I 205-UB CL-251-HTC 10 36330 630 CL-350-TPC 25
101-AIT 201-TB - 1 201-L 205-UL CL-253-HTC 10 30250 - - 25
101-AT 201-T CL-152-VTC 1 201-R 205-UR CL-252-HTC 10 30450 - - 25
101-ASS 201-SS CL-150-VTC-S 1 201-A 205-S CL-150-HTC 10 36202 602 CL-150-TPC 26
11002-B - - 1 201-ASS 205-SSS CL-150-HTC-S 10 36204 604 CL-250-TPC 26
12002-B - - 1 201-AI 205-SB CL-151-HTC 10 36204-SS 604-SS - 26
13002-B - - 1 201-AL 205-SL CL-153-HTC 10 36205 - - 26
13005 305-U CL-200-VTC 2 201-AR 205-SR CL-152-HTC 10 36224 624 CL-350-TPC 26
13005-SS 305-USS CL-200-VTC-S 2 20800 - - 11 36225 - - 26
13005-HB - - 2 20800-SS - - 11 304-C - - 26
13005-SM - - 2 20300 - - 11 304-E 608 CL-200-PC 26
13007 307-U - 2 22100 - - 12 304-H - - 26
13007-SM - - 2 22105 - - 12 305-C - - 26
13008 309-U - 2 20752-B 213-U CL-260-HTC 12 305-E - - 26
12050 202 CL-250-VTC 3 21502-B - - 12 305-H - - 26
12050-U 202-U - 3 22502-B 227-U - 12 30509 - - 27
12050-UL 202-UL - 3 201-B 215-U CL-350-HTC 13 30609 - - 27
12050-SS 202-SS CL-250-VTC-S 3 201-BSS 215-USS CL-350-HTC-S 13 30519 - - 27
12050-HB - - 3 201-BI 215-UB CL-351-HTC 13 30619 - - 27
12050-SM - - 3 201-BS 215-S CL-300-HTC 13
12055 202-B CL-251-VTC 3
Latch Type Toggle Clamps
201-BSI 215-SB - 13
12060 - - 3 201-BHB - - 13 40323 323 CL-100-PA 28
12065 - - 3 201-BSM - - 13 40323-SS 323-RSS CL-100-PA-S 28
12070 202-T CL-252-VTC 3 20820 317-U CL-475-HTC 14 431 331 CL-200-PA 28
12075 202-TB - 3 203-F - - 14 431-SS 331-SS CL-200-PA-S 28
12080 - - 3 203-FL - - 14 40341 341 CL-300-PA 28
12085 - - 3 202-F - - 14 40341-SS 341-SS CL-300-PA-S 28
101-B - - 4 202-FL - - 14 40323-R 323-R - 28
102-B - - 4 225-D 225-U CL-450-HTC 15 431-R 331-R CL-200-LPA 29
106-B - - 5 225-DSS 225-USS CL-450-HTC-S 15 40341-R 341-R CL-300-LPA 29
12205 - - 5 225-DI 225-UB CL-451-HTC 15 40323-LUB - - 29
12130 207-U CL-450-VTC 6 225-DHB - - 15 40323-LUBSS - - 29
12130-SS 207-USS CL-450-VTC-S 6 225-DSM - - 15 431-LUB - - 29
12130-HB - - 6 22165 - - 16 431-LUBSS - - 29
12130-SM - - 6 22170 - - 16 40341-LUB - - 29
12131 207-TU CL-452-VTC 6 22175 - - 16 40341-LUBSS - - 29
12132 207-UL CL-453-VTC 6 22180 - - 16 40370 375 CL-400-PA 30
12133 207-TUL CL-452-VTC 6 22185 - - 16 40370-R 375-R CL-400-LPA 30
12135 207-UB CL-451-VTC 6 22190 - - 16 40380 385 CL-500-PA 31
12136 207-TUB - 6 22195 - - 16 40370-LP 375509/385102 CL-500-PAA 31
12137 207-ULB CL-451-VTC 6 22200 - - 16 40820 - - 32
12138 207-TULB - 6 21383 - - 16 40840 - - 32
12140 207-S CL-350-VTC 6 25383 - - 17 40870 - - 32
12141 207-TS CL-352-VTC 6 22235 - - 17 40324 324 CL-110-PA 32
12142 207-L CL-353-VTC 6 25382 - - 18 40334 334 CL-210-PA 32
12143 207-TL CL-352-VTC 6 21385 - - 18 40344 344 CL-310-PA 32
12145 207-SB CL-351-VTC 6 20235 235-U CL-550-HTC 19 40324-R 324-R - 33
12146 207-TSB - 6 20235-SS 235-USS CL-550-HTC-S 19 40334-R 334-R - 33
12147 207-LB CL-351-VTC 6 20236 235-UB CL-551 19 40344-R 344-R 33
12148 207-TLB - 6 200-W - - 19 451 351 CL-250-PA 34
12265 210-U CL-650-VTC 7 200-WL - - 19 451-LP 351000 CL-250-PA-L 34
12265-SS 210-USS CL-650-VTC-S 7 200-WH - - 19 451-LPSS 351900 CL-250-PA-S-L 34
12270 204-UB CL-651-VTC 7 200-WLH - - 19 451-SS 351-SS CL-250-PA-S 34
12275 210-S CL-550-VTC 7 220-WH - - 19 452 351-B CL-251-PA 34
12280 204-SB CL-551-VTC 7 220-WLH - - 19 452-LP - CL-251-PA-L 34
12285 210-TU CL-652-VTC 7 204-GB - - 20 452-LPSS - CL-250-PA-S-L 34
12290 204-TUB - 7 204-GBL - - 20 452-SS 351-BSS - 34
12295 210-TS CL-552-VTC 7 204-GBLH - - 20 40371 371 - 34
12300 201-TSB - 7 204-G - - 20 40371-LP 371000 - 34
12305 - - 7 204-GL - - 20 43810 381 CL-350-PA 34
12310 - - 7 43810-LP 381000 CL-350-PA-L 34
Push/Pull Toggle Clamps
12315 - CL-600-VTC 7 43101 301 CL-150-PA 34
12320 - CL-610-VTC 7 301-A 601 CL-50-SPC 21 43101-LP - - 34
10444 - - 8 301-B - - 21 43110 - - 35
10448 - - 8 36006 - - 21 43120 - - 35
10247 247-U CL-850-VTC 8 36070 - - 21 43150 - - 35
10248 247-UB CL-851-VTC 8 302-F 605 CL-150-SPC 22 43160 - - 35
10249 247-S CL-750-VTC 8 302-FSS - - 22
10250 247-SB CL-751-VTC 8 302-D - - 22
101-H - - 9 30282 - - 22
101-J 267-U CL-1050-VTC 9 36092 609 - 22
101-JS 267 CL-950-VTC 9 36020 - - 23
36003 603 CL-100-PC 23
Horizontal Handle Toggle Clamps 30290 - - 23
22005 - - 10 30292 - - 23
22010 - - 10 36060 620 CL-275-SPC 24
22025 - - 10 30607 607 - 24
22030 - - 10 36010 610 CL-250-SPC 24
201 205-U CL-250-HTC 10 36012 618 - 24
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
INDEX (CONT.)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
1
0.81
Series 101-A (20.8)
0.35 (9)
• Cross Ref. : DE-STA-CO Series 201-U 0.94 1.31
(23.8) (33.3)
• Holding Capacity: 110 lbs. (50 kg)
• Weight: 0.13 lb. (60 g)
• Bar opens 100º, Handle 56º 4 x Ø 0.17
• Spindle Supplied: GH-FC-10138 (4 x Ø 4.4) 0.63 (16)
1” (25.4)
One of the most affordable clamps. T-handle and
straight base options available.
2.93
(74.4)
Spindle
3.30 Included
(83.8)
0.32
(8)
Model Description
0.62 0.08 (2)
GH-101-A U-Bar, Flanged Base, Straight Handle (15.8)
GH-101-ASS Stainless Steel Model of GH-101-A 1.06
(27)
GH-101-AI U-Bar, Straight Base, Straight Handle
GH-101-AIT U-Bar, Straight Base, T-Handle 1” (24.6)
0.19 (4.8)
GH-101-AT U-Bar, Flanged Base, T-Handle GH-101-A
2” (50)
UNIT: inch (metric mm)
Series 11002-B 2 x Ø A1 A
N Spindle
Included
K
M
GH-13002-B
L
GH-11002-B 165 lbs. 0.22 0.20 0.70 0.95 1.34 0.56 0.63 1.14 0.39 0.87 1.50 0.10 3.82 0.28 lb.
(75 kg) GH-SA-10118 96º 66º - - (24.2) (34) (14.3) - -
(5.6) (5) (18) (16) (29) (10) (22) (38) (2.5) (97) (128 g)
330 lbs. GH-SA-14134 108º 0.22 0.25 1” 1.06 1.65 0.50 0.75 1.38 0.51 1.12 1.73 0.13 5.63 0.37 lb.
GH-12002-B (150 70º - (6.4) (25.4) - (27) (42) (12.7) - -
kg) (5.6) (19) (35) (13) (28) (44) (3.2) (143) (170 g)
550 lbs. 0.32 0.35 1.32 2.01 0.75 1” 1.69 0.75 1.38 3.94 0.13 7.72 0.84 lb.
GH-13002-B (250 kg) GH-SA-56212 106º 67º - - (33.5) - (51.1) - -
(8) (8.8) (19) (25) (43) (19) (35) (100) (3.2) (196) (380 g)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
Spindle
J Included
H
L
GH-13005
M
Holding Spindle
Model ØA B C D E F G H J K L M Weight
Capacity Supplied
150 lbs. 0.17 0.35 0.50 0.53 1.03 0.63 1” 1.40 0.31 0.50 1.21 2.24 0.13 lb.
GH-13005 GH-FC-10138
(68 kg) (4.4) (9) (12.7) (13.5) (26.2) (15.9) (25.4) (35.2) (7.9) (12.7) (30.8) (57) (60 g)
GH-13005-SS Stainless Steel Model of GH-13005
330 lbs. 0.28 0.60 0.77 1.06 1.73 1.16 1.81 2.31 0.50 0.87 1.97 3.69 0.50 lb.
GH-13007 GH-FC-56212
(150 kg) (7) (15.2) (19.5) (27) (44) (29.4) (46) (58.7) (12.7) (22.2) (50.1) (93.7) (230 g)
705 lbs. 0.31 0.75 1.14 1.54 2.53 1.50 2.46 3.46 0.75 1.31 2.66 5.32 1.38 lbs.
GH-13008 GH-FC-38312
(320 kg) (7.9) (19) (28.9) (39) (64.3) (38.1) (62.7) (88.1) (19) (33.3) (67.5) (135) (630 g)
UNIT: inch (metric mm)
E
UN IQU
13005-HB
High Base Model of GH-13005 0.31
(7.9)
Spindle
Included
1”
(25.4)
GH-13005-HB
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
1.06 1.56
• Cross Ref. : DE-STA-CO Series 202 (27) (39.7)
GH-12050
Model Description
3.74
GH-12050 Fixed Spindle, Flanged Base, Straight Handle (95)
GH-12050-SS Stainless Steel Model of GH-12050 4.21 0.38
GH-12050-U U-Bar, Flanged Base, Straight Handle (107) (9.6) Spindle
Included
Extra Long U-Bar 2.27” (58 mm)
GH-12050-UL Flanged Base, Straight Handle
GH-12055 Fixed Spindle, Straight Base, Straight Handle
0.89 0.13
GH-12060 Solid Bar, Flanged Base, Straight Handle (3.2)
(23)
GH-12065 Solid Bar, Straight Base, Straight Handle 0.25 1.37
(6.4) (35)
GH-12070 Fixed Spindle, Flanged Base, T-Handle
GH-12075 Fixed Spindle, Straight Base, T-Handle
GH-12080 Solid Bar, Flanged Base, T-Handle 1.30 1”
(33) (25.4)
GH-12085 Solid Bar, Straight Base, T-Handle 2.52 (64)
GH-12050-U
QUE
UNI
12050-HB
High Base Model of GH-12050
4.80
(122) 0.38
(9.6)
1.66 Spindle
(42.2) Included
GH-12050-HB
QU E
UNI
12050-SM
Side Mount Model of GH-12050
Spindle
0.38 Included
(9.6)
0.20 0.64
(5.2) (16.2)
2.36
(60)
0.93
(23.5) 1.66
(42.2)
1.06 (27) 1.35 (34.2)
0.20 (5.1) 1.56 (39.7) 2.52 (64.2)
GH-12050-SM UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
101-B 0.33
(8.4)
0.79 1.18
• Holding Capacity: 220 lbs. (100 kg) (20) (30)
• Weight: 0.3 lb. (135 g)
• Bar opens 90º, Handle 65º 0.94 (24)
• Spindle Supplied: GH-FC-14134 1.30 (33) 1.38 (35)
0.39 Spindle
(10) Included
4.69
(119)
0.6 0.30
(15.2) (7.5)
2.16
(55)
1.76
(45) 1.15 0.55
(29)
(14)
GH-101-B
4 x Ø 0.19
(4 x Ø 4.8) UNIT: inch (metric mm)
4 x Ø 0.19
102-B (4 x Ø 4.8)
0.33
(8.4)
• Holding Capacity: 220 lbs. (100 kg)
0.71 1.10
• Weight: 0.25 lb. (115 g) (18) (28)
• Bar opens 90º, Handle 65º
• Spindle Supplied: GH-FC-14134 0.94
(24) 0.55
(14)
1.54 (39) 1.14 (29)
3.68
(94)
Spindle
Included
0.39
(10)
0.08
0.76 (2)
(19)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
106-B
0.30 (7.6)
5.50
(140) Spindle
Included
0.41
(10) 1.25
(32)
0.25 (6.5)
0.50 (13)
1.50
(38)
0.50 (13)
GH-106-B
6 x Ø 0.19
(6 x Ø 4.8) UNIT: inch (metric mm)
6.50 (165)
12205
1.37 2.12
(35) (54)
• Holding Capacity: 400 lbs. (182 kg)
0.32 3.12 (79.4)
• Weight: 1.36 lbs. (620 g) (8.1)
• Bar opens 100º, Handle 57º 4 x Ø 0.28 1.13
(4 x Ø 7.2) (28.6)
• Spindle Supplied: GH-FC-56212 1.94 (49.2)
7.87
(200)
Spindle
0.75 Included
(19)
2”
(51) 0.13
(3.2)
4.18 (106.3)
6.39 (162.4)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
Series 12130
0.33
Popular! (8.3)
1.25 1.81
0.58 (14.7) (31.8) (46)
• Cross Ref. : DE-STA-CO Series 207
• Holding Capacity: 500 lbs. (227 kg) 1.87 (47.6)
• Bar opens 100º, Handle 60º 2.81 (71.4) 0.75 (19) 4 x Ø 0.28
• Spindle Supplied: GH-FC-56212 (4 x Ø 7.2)
QUE
UNI
12130-HB 6.50
(165)
High Base Model of GH-12130
0.63 (16)
Spindle
Included
2.25
(57)
2.81 1.75
(71) (45)
GH-12130-HB
QUE
UNI
12130-SM
Side Mount Model of GH-12130 Spindle
Included
0.63 (16)
0.96
0.28 (24)
0.12 (3) (7.2)
2.62
(66.7)
1.12
(28.5)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
7.50
(202)
GH-12265
8.82
(224) 0.75 Spindle
(19)
Included
Model Description Weight
Series 12305
1.25 (31.8)
• Holding Capacity: 750 lbs. (364 kg)
• Weight: 2.18 lbs. (990 g) 2.13
0.77 (19.2)
• Bar opens 100º, Handle 65º (54)
• Spindle Supplied: GH-FC-38312 0.38
(9.6)
4 x Ø 0.31 1.13 (28.6)
(4 x Ø 7.9)
Note the angular spindle bar. Available 2.06 (52.4)
with open or solid spindle bars. Solid
bar can be shortened, and the supplied 0.56 0.37
bolt retainer welded on. Angular bar (14.3) (9.5)
keeps the overall height low, yet bar
clearance high.
1.63
(41.3)
8.62
(219)
0.87
9.69 (22.2)
(246) 1”
(25.4)
2.50
Spindle
Included
(64) 0.19
Model Description (4.8)
GH-12305 Open bar, Flanged Base
GH-12310 Open Bar, Straight Base
0.4 (11)
GH-12315 Solid Bar, Flanged Base
4.56 (116)
GH-12320 Solid Bar, Straight Base GH-12305 UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
1”
(25.4)
2” 4 x Ø 0.41
(50.8) (4 x Ø 11)
GH-10448
8.87 Spindle
(225) Included
9.50
(241) 0.89 Roll Pin Position
(22.6)
2”
(51) 2.63 0.13
0.20 (3.2)
(67) (5)
0.37
Model Description (9.5)
GH-10247 U-Bar, Flanged Base
1.25
GH-10248 U-Bar, Straight Base (31.8)
GH-10249 Solid Bar, Flanged Base 5” (126.4) 2” (50.8)
GH-10250 Solid Bar, Straight Base GH-10247 UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
VERTICAL HANDLE TOGGLE CLAMPS
101-H
• Holding Capacity: 1,000 lbs. (450 kg)
• Weight: 2.69 lbs. (1,220 g)
• Bar opens 101º, Handle 63º
• Spindle Supplied: GH-SA-12300
11”
(280)
Spindle
0.82 Included
(20.8)
4 x Ø 0.35 2.36
(4 x Ø 9) (60)
0.16 (4)
Series 101-J
3” (76.2)
• Cross Ref. : DE-STA-CO Series 267 2” (51)
• Holding Capacity: 1,200 lbs. (550 kg) 0.66
(17)
• Weight: 5.6 lbs. (2,540 g) 2.75 3.75
• Bar opens 100º, Handle 48º (with roll pin on top) (70) (95.2)
• Bar opens 140º, Handle 60º (with roll pin on bottom) 0.50 (13)
• Spindle Supplied: GH-SA-58500
• Hardened bushings and removable ground pins
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
10
Series 22005
• Holding Capacity: 50 lbs. (22.7 kg) 0.19 (4.76) 0.09 (2.4) 0.17 (4.4)
• Weight: 0.06 lb. (25 g)
• Bar opens: 90º, Handle 60º
• Spindle Supplied: GH-SA-08034 (Nylon)
0.94 0.63 0.38 (9.6)
(23.8) (16)
0.41 (10.4)
Low
0.40
GH-22025 (10.2)
0.53
(13.5)
0.95 Spindle
(24.2) Included
0.47
(12)
Model Description 0.15 (4) 0.05
(1.2)
GH-22005 High Bar, Flanged Base 0.63 (15.9)
GH-22010 High Bar, Straight Base 0.40 (10.2) 0.94 (23.8)
GH-22025 Low Bar, Flanged Base 1.03 (26.14)
GH-22030 Low Bar, Straight Base
2.81 (71.46)
UNIT: inch (metric mm)
Series 201
0.19
• Cross Ref.: DE-STA-CO Series 205 (5)
• Holding Capacity: 60 lbs. (27 kg) GH-201 Series
• Weight: 0.09 lb. (40 g) 0.31
(8)
• Bar opens: 90º, Handle 80º
3.11 (79)
• Spindle Supplied: GH-SA-08034 (Nylon)
Ø 0.17 0.79
(20) 0.17 (4.4)
This compact clamp is the most economical horizontal toggle (Ø 4.3)
clamp. Most suitable for holding down sheet metal or circuit
boards. Many spindle bar and base combinations available.
0.94 0.63
(23.8) (16)
Ø 0.37
(Ø 9.5)
GH-201-A Series
0.13 Spindle
Model Description (3.2) Included
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
11
0.17
Spindle (4.2)
Included
0.22
(5.5)
1.25
GH-20800 (32) 0.86
(22)
0.49
(12.5)
0.35 (9)
0.24 0.55 0.55 0.06
(6) (14) (14) (1.6)
Model Description 1.10 (28) 0.95 (24)
GH-20800 Flanged Base 3” (76.2)
GH-20800-SS Stainless Steel Model of GH-20800 UNIT: inch (metric mm)
20300
• Holding Capacity: 66 lbs. (30 kg)
• Weight: 0.22 lb. (100 g) 1.18 0.87 0.20 (5)
(30) (22)
• Bar opens: 65º, Handle 55º
• Spindle Supplied
4 x Ø 0.18
(4 x Ø 4.5)
0.35 (9)
Spindle
Included
1” 0.16
(25.4) (4)
4.33 (110)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
12
0.50 83º
(12.7) 70º
1” Spindle
GH-22100 (25.4) Included 0.06 (1.5)
1.59
(40.3)
0.25 (6.35)
2.46 (62.5)
Model Description 1.06
(27)
GH-22100 Flanged Base
1.56 (40)
GH-22105 Straight Base
5.59 (141.9)
Series 20752-B A B C D
20752-B Base G
Spindle
Included K
J
L M
GH-21502-B N
Holding
Model A B C D E Ø E1 F G H J K L M N Weight
Capacity
165 lbs. 1.06 0.21 0.20 0.66 0.53 0.37 0.75 0.08 1.41 1” 4.11 0.22 lb.
GH-20752-B - - -
(75 kg) (27) (5.3) (5.2) (16.8) (13.5) (9.5) (19) (2) (36) (25) (104) (100 g)
330 lbs. 1.57 1.10 0.87 0.24 0.22 1.02 0.55 1” 0.10 2.44 1.50 6.73 0.50 lb.
GH-21502-B - -
(150 kg) (40) (28) (22) (6.2) (5.5) (26) (14) (25.1) (2.5) (62) (38) (171) (230 g)
550 lbs. 1.85 1.22 1.02 0.35 0.26 1.02 0.69 1.34 0.12 3.11 1.65 8.62 0.95 lb.
GH-22502-B - -
(250 kg) (47) (31) (26) (9) (6.6) (26) (17.5) (34) (3) (79) (42) (219) (430 g)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
13
Spindle
Included
85º
0.50 60º
(12.7)
GH-201-B
Model Description A ØB C
1”
GH-201-B U-Bar, Flanged Base 0.29 (7.4) - - (25.1) 0.08
(2)
GH-201-BSS Stainless Steel Model of GH-201-B 0.29 (7.4) - -
GH-201-BI U-Bar, Straight Base 0.29 (7.4) - - 0.5
(12)
2.24 (56.9)
GH-201-BS Solid Bar, Flanged Base - 0.28 (7.1) 0.16 (4)
GH-201-BSI Solid Bar, Straight Base - 0.28 (7.1) 0.16 (4) 5.65 (143.5)
UNIT: inch (metric mm)
UNIT: inch (metric mm)
QUE
UNI
201-BHB
• High Base Model of GH-201-B
• Weight: 0.32 lb. (146 g) Spindle
Included
85º 73º
0.50 (12.7)
1.66
(42.2)
GH-201-BHB
QUE
UNI
201-BSM
• Side Mount Model of GH-201-B
0.50
• Weight: 0.36 lb. (163 g) (12.5)
0.69
(17.4)
0.12 (3)
0.20
(5.1)
Spindle
Included
1.77
(45)
1.04
(26.4) 0.70
(17.8)
GH-201-BSM
0.87
(22.1) 2.10 (53.25) 1.73 (44)
0.24
(6.1) 1.42 (36)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
14
20820 8 x Ø 0.26
0.35 1” (25.4)
(8 x Ø 6.7)
• Cross Ref.: DE-STA-CO Model 317-U (9)
2.75
(70.1)
1.26
(32)
6.41
(163)
GH-20820
2.56 (65) 1.38
(35)
4.42 (112.3)
UNIT: inch (metric mm)
0.63 (16)
Spindle
1.34 Included
(34) 0.12
(3)
GH-203-F
1.61 (41)
A 2.24 (57)
7.80 (198)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
15
0.50 (12.7)
Spindle
1.37 Included
(35)
1.90
(48.3)
0.26 (6.7)
0.25 (6.4)
GH-225-D 1” (25.4)
2.75 (70) 1.50 (38)
Model Description 6.81 (173)
GH-225-D U-Bar, Flanged Base UNIT: inch (metric mm)
GH-225-DSS Stainless Steel Model of GH-225-D
GH-225-DI U-Bar, Straight Base
QUE
UNI
225-DHB 6.61 (168)
0.50
• High Base Model of GH-201-B (12.7)
• Weight: 0.63 lb. (286 g)
Spindle
Included
2.13
(54)
QUE
UNI
225-DSM
• Side Mount Model of GH-201-B
• Weight: 0.69 lb. (315 g)
0.50
(12.7)
Spindle
0.26 1.07 Included
(6.7) (27)
2.65
1.07 (67)
(27.3) 0.65
(17)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
16
Series 22165
0.33 (8.4)
• Holding Capacity: 550 lbs. (250 kg)
• Bar opens: 96º, Handle 88º 1.37 0.87
• Spindle Supplied: GH-FC-56212 (35) (22)
1.25 (32)
0.56
(14.3)
Spindle
A Included
0.13
C (3.2)
GH-22165
0.25 1” (25.4)
(6.4)
Model Description A B C D Weight 1.25 (32)
21383
• Holding Capacity: 550 lbs. (250 kg)
• Weight: 0.46 lb. (209 g) 1.50 1”
• Bar opens: 72º, Handle 72º (38) (25) 0.37 (9.4)
4 x Ø 0.28
(4 x Ø 7)
Spindle
Included
0.55 (14)
2”
(51) 1.26 0.79
(32) (20)
GH-21383
1.54 (39) 0.09 (2.3)
7.83 (199)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
17
25383
• Holding Capacity: 600 lbs. (280 kg)
• Weight: 0.96 lb. (435 g)
• Bar opens: 80º, Handle 80º
• Spindle Supplied 1.73 1.10
(44) (28) 0.43 (11)
4 x Ø 0.28
(4 x Ø 7)
0.79 (20)
Spindle
Included
2.80
(71)
GH-25383 1.50 0.91
(38) (23)
0.12 (3)
3.15 (80) 2.56 (65)
9.76 (248)
UNIT: inch (metric mm)
22235
• Holding Capacity: 600 lbs. (273 kg) 2.25 1.63 1.31 0.31 (8)
(57) (41) (33)
• Weight: 1.41 lbs. (640 g)
• Bar opens: 111º, Handle 94º
• Spindle Supplied: GH-FC-56212
Ø 0.33 Ø 0.26
(Ø 8.3) (Ø 6.7)
0.69 (17.5)
Spindle
Included
GH-22235 1.81
(46) 0.16
(4)
1.63 (41.3)
2” (50.8)
4.09 (104) 3.13 (79.4)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
18
25382
• Holding Capacity: 620 lbs. (280 kg)
• Weight: 0.84 lb. (380 g)
• Bar opens: 80º, Handle 80º
• Spindle Supplied
2.24 1.46
(57) (37) 0.47 (12)
4 x Ø 0.41
(4 x Ø 11)
Spindle
Included
0.79 (20)
GH-25382
1.44 0.12
(37) (3)
1.18
(30)
3.35 (85) 2.24 (57)
UNIT: inch (metric mm)
21385
0.43 (11)
• Holding Capacity: 660 lbs. (300 kg) 2.36 1.57
(60) (40)
• Weight: 1.08 lbs. (490 g)
• Bar opens: 80º, Handle 85º
• Spindle Supplied: GH-SA-38200
Spindle
Included
0.79 (20)
1.46 (34)
3.35 (85) 2.28 (58)
10.63 (270)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
19
Series 20235
• Holding Capacity: 750 lbs. (340 kg)
• Weight: 1.41 lbs. (640 g) 0.43 (11)
• Bar opens: 85º, Handle 50º 2.25 1.63
• Spindle Supplied: GH-FC-38312 (57.2) (41.3)
4 x Ø 0.33
(4 x Ø 8.3)
0.75 (19)
Spindle
1.75 Included 0.16
(44.4) (4)
GH-20235 2.45
(62.2)
Model Description
0.31 (7.95)
GH-20235 U-Bar, Flanged Base
1.63 (41.3)
GH-20235-SS Stainless Steel Model of GH-20235
4.26 (108.3) 2.25 (57.1)
GH-20236 U-Bar, Straight Base
11.64 (295.6)
UNIT: inch (metric mm)
Series 200-W
0.50 (12.6)
• Holding Capacity: 880 lbs. (400 kg)
• Bar opens: 84º, Handle 85º
1.96 1.18
(50) (30)
Woodworking models
These clamps have an extra high and long
spindle bar. The 220-WH and 220-WLH have an
extra lever to increase clamping leverage. 4 x Ø 0.39
(4 x Ø 10)
GH-200-W GH-200-WLH
Model Spindle A B C Weight
2.36 9.45 1.32 lbs.
GH-200-W
2.13 (60) (240) (600 g) 0.81 (20.5)
GH-FC-38312 (54) 4.33 11.42 1.41 lbs.
GH-200-WL (110) (290) (640 g) Spindle
2.36 9.45 1.54 lbs. Included
GH-200-WH (60) (240) (700 g) A
4.33 11.42 1.64 lbs.
GH-200-WLH
3.11 (110) (290) (745 g)
GH-FC-38412 (79) 2.36 9.45 1.74 lbs. GH-220-WH
GH-220-WH GH-220-WLH
(60) (240) (790 g) 1.65 (42)
4.33 11.42 1.83 lbs. B 2.76 (70)
GH-220-WLH (110) (290) (830 g) C
UNIT: inch (metric mm) UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HORIZONTAL HANDLE TOGGLE CLAMPS
20
Series 204-GB
• Holding Capacity: 1,400 lbs. (630 kg)
2.80 2” 0.50 (12.7)
• Bar opens: 91º, Handle 94º (71) (51)
• Spindle Supplied: GH-SA-12300
This clamp is based on the GH-204-G
design, without the cast iron base.
4 x Ø 0.37
(4 x Ø 9.5)
1”
(25.4)
Spindle
Included
A 0.24
(6)
2.24 (57)
GH-204-GB C 3.27 (83)
B
UNIT: inch (metric mm)
Series 204-G
• Holding Capacity: 1,400 lbs. (636 kg)
• Weight: 2.69 lbs. (1,220 g)
• Bar opens: 91º, Handle 94º 1.89 1.18 0.50 (12.7)
(48) (30)
• Spindle Supplied: GH-SA-12300
1”
(25.4)
Spindle
2” Included
(51) 0.50
(13)
0.39 (10)
GH-204-G
1.38 (35) 1.38 (35)
Model Description 3” (76.2) 3.54 (90)
GH-204-G Open Bar, Ductile Iron Base 10.55 (268)
UNIT: inch (metric mm)
GH-204-GL Long Closed Bar, Ductile Iron Base
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
21
0.63 1.06
(15.9) (27)
• Cross Ref.: DE-STA-CO Model 601
• Holding Capacity: 100 lbs. (45 kg)
• Weight: 0.11 lb. (50 g) 3 x Ø 0.17
(3 x Ø 4.4) 0.63 0.39
• Handle opens: 190º (15.9) (10)
1.55 (39.4) 1.30 (33)
• Plunger stroke: 0.63” (15.9 mm)
2.85 (72.4)
• Spindle supplied: GH-SA-08034 1/4-20 THD GH-301-B
(Nylon)
Economical, miniature push-pull clamp
GH-301-A
with long plunger stroke. 8-32 THD
1.71
(43.5)
Model Description GH-301-A
0.50
GH-301-A 8-32 Thread (12.7)
36006 1.42 1”
(36) (25.3)
• Holding Capacity: 110 lbs. (50 kg)
• Weight: 0.15 lb. (70 g)
• Handle opens: 93º
• Plunger stroke: 0.43” (11 mm)
• Spindle supplied 4 x Ø 0.21
(4 x Ø 5.3)
2.48 0.85
(63) (21.6) M4
0.59
(15)
0.59
(15)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
22
0.96 Spindle
(24.6) Included
0.85
(22)
Model Description 1.68
(43) 0.12
GH-302-D Flanged Base (3)
0.41 (10.5)
GH-30282 Straight Base
GH-302-D 1.57 (40)
3” (76) 2.76 (70)
8.46 (215)
UNIT: inch (metric mm)
36092
• Cross Ref.: DE-STA-CO Model 609 2.20 1.62
(55.6) (41.2)
• Holding Capacity: 400 lbs. (180 kg)
Ø 0.50
• Weight: 0.85 lb. (397 g) (Ø 12.7)
• Handle opens: 180º
• Plunger stroke: 1.25” (31.8 mm)
4 x Ø 0.20
• Spindle supplied: GH-SA-56200 (4 x Ø 5.2)
• Accepts all 5/16-18 diameter spindles Spindle
Included
Similar to GH-302-F. Addition of 3.35
safety pins minimizes finger pinch. (85) 5/16-18 THD
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
23
3.86
(98)
5/16-18 THD
0.79
(20) 0.12 (3)
QUE
UNI
30290 & 30292 REVERSE ACTION
3.27 2.56
• Holding Capacity: 650 lbs. (295 kg) (83) (65)
• Weight: 2.80 lbs. (1,270 g)
• Handle opens: 45º
• Plunger stroke: 0.91” (23 mm) 4 x Ø 0.35
(4 x Ø 9)
Plunger locks in extended position only.
0.94 1/2-13 THD
(24)
1.92
(49) 0.18
GH-30290 (4.5)
Model Description
GH-30290 Flanged Base 0.48 (12.2) 2.36 (60)
2.64 (67) 1.97 (50) 3.62 (92)
GH-30292 Straight Base 12.17 (309)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
24
Q UE
UNI
36060 REVERSE ACTION
• Cross Ref.: DE-STA-CO Model 620
• Holding Capacity: 660 lbs. (300 kg) 2.20 1.57
• Weight: 1.36 lbs. (615 g) (56) (40)
• Handle opens: 76º Ø 0.61 (Ø 15.6)
1.69 0.13
(43) (3.2)
0.50 (13)
0.19 (4.8)
0.69 0.63 1.37 (34.9)
GH-30607 Spindle (17.5) 1.63 (41.3)
Included (16)
1.72 (43) 4.31 (110)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
25
303-EK
2.52 2.32 3.07
(64) (59) (78)
• Holding Capacity: 1,000 lbs. (454 kg)
• Weight: 2.13 lbs. (965 g)
• Handle opens: 190º 0.35 (9)
• Plunger stroke: 1.97” (50 mm)
This clamp has a key way to keep the
plunger from rotating.
5.71
(145)
1/2-13 THD
45º
M N
K ØL
R
GH-30450 Spindle
Included
P Q
Holding Handle Plunger
Model A ØB C D E F G H J K ØL M N P Q R Weight
Capacity Opens Stroke
550 lbs. 1.26 0.26 1/4-20 0.47 0.16 0.67 0.39 1.18 1.65 2.24 0.43 5.35 3.35 2” 0.91 0.98 0.85 lb.
GH-30250 (250 190º 3/4-16
kg) (32) (6.5) (M6 x 1) (12) (4) (17) (10) (30) (42) (57) (11) (136) (85) (51) (23) (25) (385 g)
990 lbs. 1.50 0.33 3/8-16 0.79 0.18 0.87 0.51 1.18 1.77 2.52 0.63 6.81 4.72 2.34 1.18 1.18 1.70 lbs.
GH-30450 (450 kg) 185º 1”-12
(38) (8.5) (M10 x 1.5) (20) (4.5) (22) (13) (30) (45) (64) (16) (173) (120) (60) (30) (30) (774 g)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
26
Series 36202
T THD
B
Supplied with jam nut on the work side
All three of these plunger type push/pull clamps have threaded
collars for mounting in threaded, or through holes. All clamps D E A
are supplied with thin lock nuts. Threaded mounting plates and Spindle
brackets are also available as options. Included
F THD, G Deep
ØH
J K
L
GH-36205 GH-36225
GH-36224
Model Description
GH-36205 Mounting Bracket for GH-36204
GH-36225 Mounting Bracket for GH-36224
E G THD
H Deep
E
F Spindle J
Included
K
L M
GH-305-C N
GH-304-H P
Holding Spindle Plunger
Model Description A B ØC ØD E F G H J K L M N P Weight
Capacity Supplied Stroke
500 lbs. 2.94 0.75 lb.
GH-304-C 45º Handle (227 kg) 1.26 2.25 1.63 0.50 0.26 (75) 1” 1.19 0.19 1.38 0.81 2.06 2.10 4.94 (340 g)
GH-SA-56200
500 lbs. (32) (57.2) (41.4) (12.6) (6.7) 3.56 (25.4) 5/16-18 (30.2) (4.8) (35) (20.6) (52.4) (53.3) (125.6) 0.75 lb.
GH-305-C 90º Handle (227 kg) (91) (340 g)
850 lbs. 3.77 1.28 lbs.
GH-304-E 45º Handle (386 kg) 1.65 2.25 1.63 0.63 0.33 (95.8) 1.25 1.57 0.20 1.63 1.25 2.31 3.06 6.23 (580 g)
GH-SA-38300
850 lbs. (42) (57.2) (41.4) (15.9) (8.3) 4.83 (31.8) 3/8-16 (40) (5) (41.4) (31.8) (58.8) (77.7) (158.2) 1.28 lbs.
GH-305-E 90º Handle (386 kg) (123) (580 g)
1,500 lbs. 5.25 3.26 lbs.
GH-304-H 45º Handle (680 kg) 2.36 2.81 2” 0.76 0.33 (133) 1.75 1.94 0.25 2” 2” 2.88 4.76 9.38 (1,480 g)
GH-SA-12300
1,500 lbs. (60) (71.4) (50.8) (19.2) (8.3) 6.76 (44.4) 1/2-13 (49.2) (6.4) (50.8) (50.8) (73.2) (121) (238) 3.26 lbs.
GH-305-H 90º Handle (680 kg) (172) (1,480 g)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PUSH/PULL TOGGLE CLAMPS
27
ØH
E THD
G
M
ØF L
D Spindle
Included
B C J
GH-30509
K
ØH
E THD
G
M
ØF L
D
Spindle
Included
B C J
GH-30519 K
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
28
Series 431 N
4xØG
• Supplied with latch plate and standard U-bolt M
• Optional Long U-Bolts available 2xØQ
P K L
B
A D E
Model 40323
GH-431 C F
GH-40341
ØJ
Model Description
R
GH-40323-SS Stainless Steel Model of GH-40323
GH-431-SS Stainless Steel Model of GH-431
GH-40341-SS Stainless Steel Model of GH-40341 H
NEW
40323-R
2.17 (55)
0.94 (24)
Ø 0.16
(Ø 4)
1.31
(33.3)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
29
NEW N
B E
C F
ØJ R
GH-431-R
GH-40341-R
H
QUE
UNI
Optional Long U-Bolts
When you need a longer reach, you need the LUB’s; Long-Reach U-Bolts for use with latches.
Use with
Model L L1 W ØD
L Model No.
2.75 1.25 0.75 0.16
GH-40323-LUB GH-40323, GH-40323-R (70) (31.8) (19) (4.1)
GH-40323-LUBSS Stainless Steel Model of GH-40323-LUB
4.5 2 1.25 0.2
GH-431-LUB GH-431, GH-431-R
L1 (114) (50.4) (31.8) (5.1)
ØD W
GH-431-LUBSS Stainless Steel Model of GH-431-LUB
6.25 3.13 1.50 0.3
GH-40341-LUB GH-40341, GH-40341-R (159) (79.5) (38.1) (7.6)
GH-40341-LUBSS Stainless Steel Model of GH-40341-LUB
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
30
40370
• Cross Ref.: DE-STA-CO Model 375
• Holding Capacity: 4,000 lbs. (1,818 kg)
5.71 (145)
• Weight: 2.78 lbs. (1.26 kg)
2.20 (56)
GH-40370-LP
3.50 (89)
0.75 (19)
Ø 0.37
(Ø 9.5) 4”
(102)
GH-40370-LP GH-40370
(Sold Separately) 1.13 (29)
NEW
40370-R
10.31 (261.85)
Ø 0.37
(Ø 9.5) 4
(102)
1.13 (29)
GH-40370-LP GH-40370-R
(Sold Separately) 1.37 (34.9) 2.25
2.25 (57) 0.38
(57.2) (9.6)
3.37
(86)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
31
40380
• Cross Ref.: DE-STA-CO Model 385
• Holding Capacity: 7,500 lbs. (3,400 kg)
5.76 (146.3)
• Weight: 3.25 lbs. (1.48 kg)
2.76 (70)
GH-40370-LP
2.19 (56)
1.13
(28.6)
3.69
GH-40380 (93.8)
GH-40370-LP Ø 0.50
(Ø 12.7)
(Sold Separately) 1.13
(28.6)
1.37
(34.9) 2.25 (57.2) 0.38
2.25 (57.2) (9.6)
3.38 (85.8) UNIT: inch (metric mm)
40370-LP
3.13 2.25
(79.4) (57.2)
1.13
(28.6)
1.37
(34.9)
GH-40370-LP
2.25 (57.2)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
32
Series 40840
M
N Q C D E
GH-40870 GH-40820
mounted on a G ØK
vertical position.
H
GH-40840 A
B
Holding
Model A B C D E F G H ØJ ØK L M N P Q R Weight
Capacity
440 lbs. 0.51 1.02 0.75 0.95 1.42 0.20 0.43 0.16 0.20 1.81 2.56 0.83 3.54 0.20 2.17 0.24 lb.
GH-40820 -
(200 kg) (13) (26) (19) (24) (36) (5.2) (11) (4) (5.2) (46) (65) (21) (90) (5.2) (55) (110 g)
550 lbs. 0.75 1.38 0.98 1.26 1.89 0.26 0.55 0.81 0.24 0.26 2.87 3.82 1.12 4.47 0.26 2.76 0.67 lb.
GH-40840 (250 kg) (19) (35) (25) (32) (48) (6.5) (14) (20.6) (6) (6.5) (73) (97) (28.5) (113.5) (6.5) (70) (306 g)
1,540 lbs. 1.26 2” 1.42 1.77 2.50 0.33 0.75 1.06 0.31 0.33 3.46 4.61 1.75 5.91 0.33 3.35 1.54 lbs.
GH-40870 (700 kg) (32) (50.5) (36) (45) (63.5) (8.5) (19) (27) (8) (8.5) (88) (117) (44.5) (150) (8.5) (85) (700 g)
UNIT: inch (metric mm)
Series 40324
Supplied with latch plate
D
T
These unique latch clamps
are designed for enclosure
applications where the
clamps are perpendicular to R
the latches. C
K P
S
A B
GH-40324 G
2xØE H
Q N
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
33
NEW
40324-R, 40334-R & 40344-R
NEW! SECURE-LOCK MODELS!
This new model features a locking lever to securely lock the clamp in the closed position.
Ideal for latching applications on molds, doors, lids, and access covers.
D
T
S K
P
Model 40324-R
L
ØJ
M 4xØF
A B
G
GH-40334-R
GH-40344-R 2xØE Q H N
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
34
B C
GH-452 F D
E
UNIT: inch (metric mm)
GH-452-LP
(Sold Separately)
43101
• Cross Ref.: DE-STA-CO Model 301
• Holding Capacity: 375 lbs. (170 kg)
• Weight: 0.68 lb. (310 g)
• Optional latch plate model GH-43101-LP
0.57
(14.4)
1.75 1.24
(44.4) (31.6)
1.63
(41) 1.89 (48)
0.40
(10)
0.75 (19)
0.13 1.37
(3.2) (34.8)
GH-43101-LP 8.17 (207.6)
(Sold Separately)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
LATCH TYPE TOGGLE CLAMPS
35
GH-43110
0.87 0.10
(22) (2.5)
0.79
GH-43110 (20) 2 x Ø 0.26
(2 x Ø 6.5)
0.47 0.83 1.38 (35) 3” (76.5)
GH-43120 (12) (21)
UNIT: inch (metric mm)
GH-43150
0.91 0.13
(23)
GH-43150 (3.2)
0.94
(24)
GH-43160 0.47 0.75 1.57 4.53
(12) (19) (40) (115)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
TOGGLE PLIERS
36
All Pliers are forged from alloy steel with stainless steel rivets for durability.
5.13
50350 Ø 0.50 0.31
(130)
0.15 0.25
(Ø 12.7) (8) (4) (6.4)
• Cross Ref.: DE-STA-CO Model 424
• Holding Capacity: 200 lbs. (90 kg)
• Weight: 0.41 lb. (185 g)
• Spindle Supplied: GH-SA-14112
0.37
Ø 0.69 0.43 0.50 (10)
50380 (Ø 18) (11) (13) 0.19
(5)
50385
• Holding Capacity: 1,800 lbs. (820 kg) 3/8-24 THD 0.63 (16)
7.37 (187)
• Weight: 1.56 lbs. (710 g) 1.25
• Spindle Supplied: GH-SA-38114 (32)
3” 1.77 Spindle 2”
(77) (45) Included (51)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
TOGGLE PLIERS
37
61352
• Holding Capacity: 200 lbs. (90 kg) Ø 0.50
• Weight: 0.3 lb. (130 g) (Ø 13)
4.75 (121)
• Spindle Supplied: GH-SA-14112
1.18
(30)
4.25 3” Spindle
(108) (76) Included
2.69
(68)
50480
0.80 0.63
• Cross Ref.: DE-STA-CO Model 480 (20) (16)
• Holding Capacity: 1,100 lbs. (500 kg)
• Weight: 1.32 lbs. (600 g)
3.76 2.46
(96) (63)
6.15 (156)
UNIT: inch (metric mm)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
CAM TYPE TOGGLE CLAMPS
38
Spindle
Included
C
4xØL
M D E
J G F
K
GH-60130 H
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HEAVY DUTY WELDABLE TOGGLE CLAMPS
39
These heavy-duty clamps provide the strong, durable holding power to meet the requirements of the auto industry.
These clamps are forged from alloy steel, hardened, and ground to close tolerance. Pins are also hardened and
grounded. A separate handle is included with each clamp for welding in the desired position.
B
B
G G
H H
L L
M M
J J
D
D
C
C
GH-701-C GH-702-C
GH-701-D GH-702-D E K
F
GH-701-K E K GH-702-K
F
Holding Arm Handle
Model ØA B C D E F G H J K ØL M Weight
Capacity Opens Opens
440 lbs. 0.68 1.96 0.57 0.31 1.25 1.57 0.67 4.75 1.75 1.10 2” 1.32 lbs.
GH-701-C 194º 123º
(200 kg) (17.3) (50) (14.5) (8) (31.8) (40) (17) (121) (44.5) (28) (50.8) (598 g)
1,100 lbs. 0.85 2.69 4” 0.51 1.65 1.92 0.97 6.50 1.97 1.54 2.75 3.50 lbs.
GH-701-D 191º 122º
(500 kg) (21.7) (66.8) (102) (13) (42) (48.8) (24.6) (165) (50) (39) (70) (1,587 g)
2,200 lbs. 1.07 3.15 4.84 0.63 1.81 2.09 0.98 8.07 2.48 2.05 3.54 5.84 lbs.
GH-701-K 197º 128º
(1,000 kg) (27.2) 6” (80) (123) (16) (46) (53) (25) (205) (63) (52) (90) (2,650 g)
440 lbs. 0.68 (152.4) 0.94 1.89 0.31 1.25 1.57 0.67 3.66 1.02 1.10 2” 1.50 lbs.
GH-702-C 194º 123º
(200 kg) (17.3) (23.8) (48) (8) (31.8) (40) (17) (93) (26) (28) (50.8) (680 g)
1,100 lbs. 0.85 1.33 2.72 0.51 1.65 1.92 0.97 5.20 1.43 1.54 2.75 3.24 lbs.
GH-702-D 191º 122º
(500 kg) (21.7) (33.7) (69) (13) (42) (48.8) (24.6) (132) (36.4) (39) (70) (1,469 g)
2,200 lbs. 1.07 1.46 3.30 0.63 1.81 2.09 0.98 6.57 2.13 2.05 3.54 5.75 lbs.
GH-702-K 197º 128º
(1,000 kg) (27.2) (37.2) (84) (16) (46) (53) (25) (167) (54) (52) (90) (2,608 g)
UNIT: inch (metric mm)
Series 70305
Cross Ref.: Holding Arm Handle
Model
DE-STA-CO Capacity Opens Opens
GH-70305 503-M
1,100 lbs.
GH-70310 503-MB 214º 134º
(500 kg)
GH-70315 503-MLB
GH-70505 505-M
2,200 lbs.
GH-70510 505-MB 206º 130º
(1,000 kg)
GH-70515 505-MLB GH-70305 GH-70310 GH-70315
GH-70605 506-M GH-70505 GH-70510 GH-70515
4,400 lbs. GH-70605 GH-70610 GH-70615
GH-70610 506-MB 206º 130º
(2,000 kg) A
GH-70615 506-MLB
Model ØA B C D D1 E F G H K K1 L Weight
B
1.68 lbs.
GH-70305 - - (760 g)
- -
0.79
GH-70310 0.69 0.19 0.39 1.25 1.57 0.59 1.14 2” 1.87 lbs.
(17.5) (4.8) (20) (10) (31.8) (40) (15) (29) (51) (850 g)
1.97 1.97 1.77 2.07 lbs. G
GH-70315 -
(50) (50) (45) (940 g)
2.93 lbs.
GH-70505 - - (1,330 g)
- -
4.9 1.10
GH-70510 0.87 (125) 0.19 0.48 1.59 2.24 1.02 1.50 2.87 3.28 lbs.
(22.2) (4.8) (28) (12.3) (40.3) (57) (26) (38) (73) (1,490 g) L
2.50 2.50 2” 3.51 lbs. H
GH-70515 -
(63.5) (63.5) (51) (1,590 g)
5.62 lbs. D
GH-70605 - - (2,550 g)
- - D1 K
1.06 0.25 1.30 0.63 1.91 2.93 1.30 2” 3.58 6.24 lbs.
GH-70610 (27) (6.3) (16) (48.6) (74.3) (33) (91) (2,830 g)
(33) (51)
3” 3” 2.50 6.50 lbs.
GH-70615 - E
(76) (76) (63.5) (2,950 g) K1
C
UNIT: inch (metric mm) F
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
HEAVY DUTY WELDABLE TOGGLE CLAMPS
40
2.09
(53)
1.26 2.24
(32) (57)
0.75 (19)
0.75 Ø 0.69
(19) (Ø 17.5)
GH-75027-SM 1.50
(38)
Ø 0.41
(Ø 10.3)
4.06 (103)
GH-75048
D
Holding Arm Handle
Model A B C D E F G Weight
Capacity Opens Opens
GH-75048 1,500 lbs. 3.25 2.65 4.26 1” 9.92 2.20 0.75 5.95 lbs.
200º 110º B
(700 kg) (82.6) (67.2) (108) (25.4) (252) (56) (19) (2,700 g)
3,500 lbs. 4” 2.72 4.63 1.26 10.87 2.57 0.87 9.26 lbs.
GH-75078 (1,600 200º 110º
kg) (101.6) (69.2) (117.5) (32) (276) (65.2) (22.2) (4,200 g)
UNIT: inch (metric mm) C A
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
F-TYPE CLAMPS
41
80070
• Holding Capacity: 440 lbs. (200 kg)
• Weight: 2.2 lbs. (1 kg) 6.06 (154)
• Screw stroke: 3.35” (85 mm) 2.83 (72) 2.72 (69)
2.05 (52)
3.15
(80)
7.17
(182) 1.10
(28) 1.18
(30)
GH-80070 1.65
(42)
0.39 (10)
0.51 (13)
1.42 0.63
(36) (16)
UNIT: inch (metric mm)
50º
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PNEUMATIC POWER CLAMPS
42
These fast acting air clamps use standard toggle clamps as the basic platform. 1/8 NPT port is standard. Maximum air
pressure allowed in the cylinder is 140 PSI.
GH-10101-A GH-101-A 150 lbs. (68 kg) GH-FC-10138 82º 0.78 (20) 1.24 in.² (31.4 mm²)
GH-12050-A GH-12050 200 lbs. (90 kg) GH-FC-14134 95º 1.18 (30) 2.78 in.² (70.7 mm²)
GH-12130-A GH-12130 350 lbs. (160 kg) GH-FC-56212 92º 1.18 (30) 2.78 in.² (70.7 mm²)
GH-12132-A GH-12132 350 lbs. (160 kg) GH-FC-56212 92º 1.18 (30) 2.78 in.² (70.7 mm²)
GH-12265-A GH-12265 600 lbs. (272 kg) GH-FC-38312 95º 1.57 (40) 4.94 in.² (125.6 mm²)
GH-12275-A GH-12275 600 lbs. (272 kg) GH-FC-38312 95º 1.57 (40) 4.94 in² (125.6 mm²)
GH-10247-A GH-10247 800 lbs. (364 kg) GH-FC-12300 95º 2 (50) 7.73 in.² (196.3 mm²)
GH-10249-A GH-10249 800 lbs. (364 kg) GH-FC-12300 95º 2 (50) 7.73 in.² (196.3 mm²)
GH-20820-A GH-20820 350 lbs. (160 kg) GH-FC-56212 90º 1.18 (30) 2.78 in.² (31.4 mm²)
UNIT: inch (metric mm)
Dimensions
Model A B C ØD E F G H
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
PNEUMATIC CLAMPS / YOKE ASSEMBLIES
43
Specifications Dimensions
Basic Holding Spindle Cylinder Cylinder
Model Model A B ØC D E F G H J K
Model Capacity Supplied Bore Stroke
100 lbs. 0.75 0.63 0.25 0.17 1.27 1.57 0.63 0.47 0.54 7.36
GH-36301-A (15.9)
GH-36301-A GH-301-A (454 kg) GH-SA-08034 (20) 1.24 in.² (3.14 cm²) (6.4) (4.4) (32.2) (40) (15.9) - (12) (13.6) (187)
600 lbs. 1.18 1.31 0.44 0.22 2.28 2.74 1.44 0.78 1.09 9.84
GH-36003-A (33.3)
GH-36003-A GH-36003 (273 kg) GH-SA-56200 (30) 2.78 in.² (7.07 cm²) (11.1) (5.6) (58) (69.5) (36.5) - (19.7) (27.7) (250)
1.63 0.63 0.34 2.03 3.30 1.37 1.63 1.18 1.05 13.66
GH-36330-A GH-36330 (1,136lbs.
2,500 1.57 GH-36330-A (41.3) (15.9)
GH-SA-38300 4.94 in.² (12.56 cm²) (8.7) (51.5) (84) (34.9) (41.3) (30) (26.6) (347)
kg) (40)
UNIT: inch (metric mm) UNIT: inch (metric mm)
ØC
Spindle
H Included
E
A B
D F G K
Yoke Assemblies
Hold two workpieces, or long pieces of fabric or metal. The yokes have spring loaded, extra-wide spindles that
provide strong, no-mar holding power that can be adjusted to accommodate varying material thicknesses and
sizes.
A x 3/4 (19) L
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
ACCESSORIES
44
OAL
Standard Adjustable
Zinc-plated finish Part No. Description
GH-FW-080 For 8 spindle
GH-FW-100 For 10 spindle
L GH-FW-140 For 1/4 spindle
GH-FW-516 For 5/16 spindle
Part No. Thread L
GH-FW-380 For 3/8 spindle
GH-SA-08034 8-32 3/4
GH-FW-120 For 1/2 spindle
GH-SA-10118 10-24 1-1/8
GH-FW-580 For 5/8 spindle
GH-SA-14112 1/4-20 1-1/2
GH-SA-14134 1/4-20 1-3/4
Neoprene Caps
GH-SA-56200 5/16-18 2
GH-SA-56212 5/16-18 2-1/2
GH-SA-38300 3/8-16 3
GH-SA-38400 3/8-16 4
Part No. Description
GH-SA-12300 1/2-13 3
GH-NC-140 For 1/4 spindle
GH-SA-12412 1/2-13 4-1/2
GH-NC-516 For 5/16 spindle
GH-SA-58500 5/8-11 5
GH-NC-380 For 3/8 spindle
GH-NC-120 For 1/2 spindle
Cone Cushion Tip Bonded Neoprene Cap
Zinc-plated finish
A
Bolt Retainers
Zinc-plated finish
OAL
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
APPENDIX
45 PART NO. PAGE PART NO. PAGE PART NO. PAGE PART NO. PAGE
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
STRONG HAND TOOLS® PRODUCT LINES
46
Quick Acting Welding Clamps, Magnets, Pliers, and Vises Affordable, Modular Welding Tables with the plate + hole
allow you to create accurate fit-ups quickly, safely and + slot system for complete flexibility in fixturing.
efficiently.
High precision, German made Welding Tables for heavy Handwheels, handles, clamps, levers, and threaded
duty fixturing applications. fasteners for manufacturing, and MRO. Stock or custom.
(North America & Asia)
Good Hand, Inc. | 8750 Pioneer Blvd., Santa Fe Springs, CA 90670 | www.goodhandinc.com | (800) 989.5244 | (562) 949.8625
TM
TOLL FREE
(800) 989-5244
TEL
(562) 949-8625
FAX
(562) 949-4875
ADDRESS
8750 Pioneer Blvd.,
Santa Fe Springs, CA 90670
WEB
www.goodhandinc.com
E-MAIL
sales@valtrainc.com