Professional Documents
Culture Documents
SLP1210N6
SLP1210N6
RailClamp®
Low Capacitance TVS Diode Array
PROTECTION PRODUCTS - RailClamp®
Description Features
RailClamp® TVS arrays are ultra low capacitance ESD ESD protection for high-speed data lines to
protection devices designed to protect high speed IEC 61000-4-2 (ESD) ±20kV (air), ±12kV (contact)
data interfaces. This series has been specifically IEC 61000-4-4 (EFT) 40A (5/50ns)
designed to protect sensitive components which are Qualified to AEC-Q100 Grade1 (-40 to +125oC)
connected to high-speed data and transmission lines Array of surge rated diodes with internal TVS Diode
from overvoltage caused by ESD (electrostatic dis- Small package saves board space
charge), CDE (Cable Discharge Events), and EFT Protects two I/O lines and a power line
(electrical fast transients).
Low capacitance: 0.2pF typical
The monolithic design incorporates surge rated, low
Low clamping voltage
capacitance steering diodes and a TVS diode in a
single package. Each line has a typical capacitance of Solid-state silicon-avalanche technology
<0.2pF to ground. The capacitance of each line is well
matched for consistant signal balance. A connection
to the TVS is provided for protection of external Mechanical Characteristics
voltage buses, such as those found in USB applica- SLP1210N6 Package
tions. They may be used to meet the ESD immunity Pb-Free, Halogen Free, RoHS/WEEE Compliant
requirements of IEC 61000-4-2, Level 4 (±15kV air,
Nominal Dimensions: 1.2 x 1.0 x 0.58 mm
±8kV contact discharge).
Lead Pitch: 0.4mm
The RClamp®0582N is qualified to AEC-Q100 Grade1
(-40 to +125oC) and is supplied in a 6-pin SLP1210N6 Lead Finish: NiPdAu
package. It measures 1.2 x 1.0 x 0.58mm. Marking : Marking Code
Packaging : Tape and Reel
Applications
Automobile USB
MMC/SD Port
Automobile Video Ports
6
GND (Pin 1) VBus (Pin 6)
It = 1mA;Pin 6 to GN D
Reverse Breakdown Voltage V BR 7 9.5 12 V
T=-40 OC to 125 OC
VR = 0V, f = 1MHz
0.2 0.5 pF
Any I/O pin to Ground
Junction Capacitance Cj
VR = 0V, f = 1MHz
0.2 0.5 pF
Between I/O pins
100
Peak Pulse Power - P PP (kW)
0.1 60
40
20
0.01 0
0.1 1 10 100 1000 0 25 50 75 100 125 150
Pulse Duration - tp (µs) Ambient Temperature TA (OC)
Clamping Voltage vs. Peak Pulse Current Normalize Capacitance vs. Reverse Voltage
I/O to Gnd - Pin 4, 5 to Pin 1 I/O to Gnd - Pin 4, 5 to Pin 1
25 0.6
0.5
20
Clamping Voltage -VC (V)
Capacitance - Cj(pf)
0.4
15 TVS to GND
Line to GND
0.3
10
0.2
O
TA=25 C
5
Waveform Parameters: 0.1 O
tr = 8µs; td = 20µs TA=25 C
Line to GND; (Pin 4 or 5 to Pin 1) f = 1 MHz
0 0
1 2 3 4 5 0 1 2 3 4 5 6 7
Peak Pulse Current - IPP (A) Reverse Voltage - VR(V)
ESD Clamping
Insertion Loss
(Contact per IEC 61000-4-2)
CH1 S21 LOG 6 dB / REF 0 dB
30 1: - 0.12430 dB
800 MHz
25 5 2: - 0.12550 dB
0 dB 900 MHz
12 3 4
-6 dB 3: - 0.13250 dB
Clamp Voltage (V)
20 1.8 GHz
-12 dB
4: - 07890 dB
15 2.5 GHz
-18 dB
-24 dB
10 TA = 25OC.
Waveform 1ns/60ns. -30 dB
Corrected for 40dB attenuation.
5 Measured with 50Ω, 40dB attenuator; -36 dB
50Ω Scope Input Impedance.
Clamp voltage measured at 30ns. -42 dB
0
0 2 4 6 8 10 -48 dB
1 10 100 1 3
ESD Surge (kV) MHz MHz MHz GHz GHz
1.0
3
2
0.8
1
TA=25OC
IF=100mA
Pins 1, 4 or 5 to Pin6
0 0.6
-50 0 50 100 150 -50 0 50 100 150
Temperature (OC) Temperature (OC)
200
11
Leakage Current - Ir (nA)
150
10
100
9
50
8 0
-50 0 50 100 150 -50 0 50 100 150
Temperature (OC) Temp. (°C)
Protecting USB 2.0 Interfaces Figure 2 - USB 2.0 High Speed Protection
USB Connector
Pin 1
Vbus
Pin 6
D- D-
Pin 2 Pin 5
D+ Pin 3 Pin 4
D+
Gnd
D/2
1 2
E/2 LxN
N
bxN
e bbb C A B
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
NOTES:
1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).
2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.
CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR
COMPANY'S MANUFACTURING GUIDELINES ARE MET.
Pin 1 Location
Tape K
B, (Max) D D1 E F P P0 P2 T(MAX) W
Width (MAX)
1.5 + 0.1 8.0 mm
1.750±.10 4.0±0.1 4.0±0.1
mm - 0.0 0.8 mm 3.5±0.05 2.0±0.05m- + 0.3 mm
4.2 mm mm 2.4 mm mm mm 0.4 mm
8 mm mm (0.59 ±0.05 mm m - 0.1 mm
(.165) (.069±.004) ( .0 9 4 ) (.157±.00- (.157±.00- (.016)
+ .0 0 5 (.031) (.138±.002) (.079±.002) (.312±.012-
4) 4)
- .0 0 0 ) )
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Road, Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804