Professional Documents
Culture Documents
Manual Strike Pro Fishing
Manual Strike Pro Fishing
peration Manual
www.un
niversal-sspace.co
om
Strike pro Fishing Manual Rev.1.01
CONTENT
1
Strike pro Fishing Manual Rev.1.01
Thank you for purchasing Strike pro Fishing. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal
2
Strike pro Fishing Manual Rev.1.01
safety and to help protect your equipment and surrounding environment from potential
damage.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
3
Strike pro Fishing Manual Rev.1.01
1. SPECIFICATIONS
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
4
S
Strike pro Fiishing Manu
ual Rev.1.01
1
2. PA
ACKAGE
E CONTE
ENTS
Open th
he package
e and make
e sure all th
he items are
e included:
1. 1 x Body Asse
embly
2. Following accessories
1 20 Power cord
2330101002 3*1
16AWG 1.8
8M 1
Φ5×
×20mm T1 10A
2 219
90100001
12 Fusse 1
250VAC
3 414
44000014
40 Manu
ual ENGLISH 1
4 25
530017100
02 171A 2
Keyy
5 253
30222200
02 2222 2
5
Strike pro Fishing Manual Rev.1.01
3. PART NAME
Marquee Assy.
Monitor
Control
panel Assy. Control Assy.
Stool assy.
Coin Assy.
Coupon dispenser
6
Strike pro Fishing Manual Rev.1.01
Play area
Leveler Caster
About 5 mm
Move Fix
NOTICE
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
7
Strike pro Fishing Manual Rev.1.01
4.3 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position so the casters
touch the ground.
Leveler Caster
Move F
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a higher level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.4 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match
the available power source. Please refer the label of the machine.
Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
Avoid putting many loads on one electrical outlet as it could generate heat and fire
resulting from overload.
Connect the grounding conductor to the earth terminal (GND):
Power socket
Power outlet
Power plug
Power plug
Power cord
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.
8
Strike pro Fishing Manual Rev.1.01
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be
stepped on or tripped over.
9
Strike pro Fishing Manual Rev.1.01
5. HOW TO PLAY
1. Insert coin(s). Press the start button to start the game. It will display “LIFT THE ROD”
after players hook fish.
3. When players lift the rod, they can see this BAR. Be careful not to pull too tight, if put to
SNAP the fish wire will be broken.
10
Strike pro Fishing Manual Rev.1.01
6. GAME OPTION
6.1 Main Menu
Basic Setting
Customized Setting
Input Test
Output Test
Game Reset
Date/Time Setting
Language
Bookkeeping
Daily Record
Reel Resistance Setting
About This Game
Back to Game
11
Strike pro Fishing Manual Rev.1.01
12
Strike pro Fishing Manual Rev.1.01
13
Strike pro Fishing Manual Rev.1.01
6.8 Bookkeeping
Player
Coins
Tickets
PayOut
Back
14
Strike pro Fishing Manual Rev.1.01
15
Strike pro Fishing Manual Rev.1.01
16
S
Strike pro Fiishing Manu
ual Rev.1.01
1
7.2 Sysstem Recovery Ope
eration
1. Turn offf the game
e. Insert the
e memory
stick into
o the USB port at the back
b of the
computerr.
W
WARNING: th
he USB flassh drive sho
ould only be used to fix software
e errors. Usiing it for
othe
er purposess may cause unexpectted results and damagges.
177
Strike pro Fishing Manual Rev.1.01
WARNING
• Before servicing the machine, be sure to turn power off. Servicing without turning the
power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent
unnecessary wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire,
electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
• Should a problem occur, turn off the power immediately and stop operating the machine.
Unplug the power cord of the service outlet. Operating the machine without correcting
the problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible, install the
machine in a well-lit location, and keep the labels clean at all times. Make sure the labels
are not hidden behind other game machines.
18
Strike pro Fishing Manual Rev.1.01
9. OVERALL CONSTRUCTION
9.1 Assembly Part 1
19
Strike pro Fishing Manual Rev.1.01
9.2 Assembly Part 2
20
Strike pro Fishing Manual Rev.1.01
9.3 Assembly Part 3
22
Strike pro Fishing Manual Rev.1.01
24
Strike pro Fishing Manual Rev.1.01
9.7 Electric Part
6
2 1 7
3 8
4
9
5
10
11
25
Strike pro Fishing Manual Rev.1.01
26
Strike pro Fishing Manual Rev.1.01
27
Strike pro Fishing Manual Rev.1.01
28
Strike pro Fishing Manual Rev.1.01
9.8 Decal
29
Strike pro Fishing Manual Rev.1.01
30
1 2 3 4 5 6 7 8
Strike pro Fishing Manual Rev.1.01
31
A3-1/2 50
SHDY-PX-03 50
J10
L+ 1 1
Audio input 60 60
L- 2 2
70
VH2P 3
80
4
70 42
40P 40P R+ 1 5
AC IN A0P A0P
1
DC IN R- 2
80 94
6 D
2 40M 40M
AMP VH2P
A0M A0M
7
8
A0M 20M 20M
1 9
20M 50M 90M
2 10
D 40M D
A 50M
3
4
E E
11
12
E
5 C
6 J11
42
Monitor XH6P 1
J3 A0
10P
1 1
10P
42
2 E
AC IN
45P 45P 3
N
L
E
2 2 DVI2 A0
60P 60P 4
3 3 J22
Filter C
HM HF 1 10 50P
42 1 J1 J3 1
J15 +12V 2 20
40M 42x2 2 2
1 +12V +12V 3 60P J12
10 50x2 3 XH3P 3 50P
2 1P pull motor 2 sides light R 4 VH3P 1
FUSE 20
3 2P pull motor 2 sides light G 5
60X2
70x2
L (1)
(1)
70P
70P
1 J2 J4
70P
60P
70P
2
4 2 sides light B 6 2 SHDY-YG.PCB 1 3
A0M
20M
5 Digital tube LI 1P reel light 7
90
91
(2)
(2)
A0P
A0P
3 2
80P
80P
40P
4 F
6 Digital tube CI 2P reel light 8 4 3 5
Monitor 90M 92 A0P
SW-1 J4 7 Digital tube DI 1P tik. light 9 VH4P VH3P 6
10P 10P E 93
1 1 8 GND 2P tik. light 10 40P HM
AC IN
45P 45P 94
2 2 DVI1 XH8P Fish mouth motor 11 A0P
60P 60P
3 3 VH11P
HM HF
J21
J13
1 30
DONGL E
45Q
+12V
10P
60P
42 J6 MOS-DRV 1
+12V 2 1 40
A0 2
3 2 70
3
HM 4 VH2P 80
30 J5 4
1 1
2 2
3 3
J1 1P shockmotor 5 42 J4 90
HF 40 1 J3 1 5
C Video card 1P resistance 6 2 2
61 1
95
91
6 C
7 2 92
10P
60P
45P
3 3 7
HDMI2 DVI1 8 72 3 93
70 VH3P 4 96 8
HDMI1 2P shockmotor 9
2P resistance 10
80 95
1 J1
5
82
4
5
95
96
9 G
96 6 97 10
VH10P 2 6 97
97 7 11
SHDY-PX-01
DVI2 J23 3 86 7 41
SHDY-PX-05 41 8 41 12
DVI1 DVI2 +12V 1 4 8 61
95 9 13
1P rod light R 2 VH4P VH8P 72
96 61 VH9P 14
1P rod light G 3 1 J2 82
Green port 97 72 15
1P rod light B 4 2 86
41 82 16
2P rod light R 5 3
61 86 17
10P 2P rod light G 6 4 B0
72 18
AC IN
A0 6 +12V A0 7
1 1 GND 8 80
Exhaust fan 2 A0 5557/6P 8
2 2P C 5559/8P
A0 C
Notice: The color and the type of the wire express as follow. For example: 2 0 M M3-MB.PCB(V1.1)
Wire color :20 is single red
A Wire type: M is AWG24 UL1007 A
9 White I R AWG14 UL1005
8 Gray H Q AWG16 UL1005 Unite mm
7 Violet G P AWG18 UL1007
6 Blue F O AWG20 UL1007 Prop. : Design Technics
Name:
5 Green E Shielding layer N AWG22 UL1007 4001~5000 ±50 U niv ersal Sp ace
A mu sem ent m ach ine Strike Pro Fishing GMP ver. wiring diagram 1
4 Yellow D Light Blue M AWG24 UL1007 3001~4000 ±40
Drawing Standard
3 Orange C Light Green L AWG26 UL1007 2001~3000 ±30 Chart Drawing NO. Version:
2 Red B Pink K AWG28 UL1007 1001~2000 ±20 A3 SHDY-PX-00(1/2)
1 Brown
Wire Color
A Black J AWG30 UL1007
Wire Type Tolerance
0~1000 ±10
UNIS Collate
Check Approve
Date:
Path:
8-Apr-2016
Page
H:\数据恢复\D\game data\game data\manual\strike pro fishing深海钓鱼\s深
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A3-2/2 J15 SHDY-PX-11 J35
50 50 50
1 1 1
60 60 90 Rspeaker
2 2 2
SHDY-PX-09 70 C P
RVS2-4 3
45P 80
1P DBV GND 4 J36
J29 42 70 50
SHDY-PX-06 40M 42 42 5 J37 1 1
45P 1 1 94 42 42 80 90 Rspeaker
45P
1P TIK. dispenser GND 50M
60M
2 2
91
A0
91
A0 Hook button
D 6
7
40M 94
1 1
2 2
94
2 2
C P
J9 1P rod mechanism GND 3 3 A0M
45P 45Px4 70M 60 60 8 C P 42
1 45P 4 4 20M
D
C 2
45P 45Px4
45P
2P DBV GND
C P
9
10
90M
J49
94 M Fish mouth motor
D
HF 2P TIK. dispenser GND 40M 40M 40M
J30 11 1 1 1 +12V
45P 10M 20M 20M E A0M A0M
2P rod mechanism GND 1 1 1 12 2 2 2
20M 90M 90M 20M 20M A0M
45P 2 2 2 Rod sensor P 3 3 3 LAT
1P coin mech. GND 30M A0M A0M 90M 90M 20M Digital PCB
3 3 3 4 4 4 CLK
90M
45P C P 5 5 5 DAT
2P coin mech. GND E E E
6 6 6 GND
45P 42
Meter matel GND C P XH6P
A0 M Rod shake motor
42
J38
1 1
42
SHDY-PX-08
41 95
2 2 R
61 96 5050RGBlight strip L=90cm 2P mechanism light
3 3 G
72 97
4 4 B 10
J6 J43
C P 10 10
1 4
60
50 CN1 CN2 50 50
J25
50
A0
1
2
K 2
3
60 70M
6
7
DBV
AE 2431 D5E
1 1 1 1 10 1P coin mech. 60 A0
42 42 A0 A0 3 HF 8
2 2 2 2 42 Client selection fitting
A0 TICK-CH.PCB A0 90 90 1P tik. dispenser 4 XH4P
J16 3 3 3 3 C4140HM-9P
42 90 90 42 20
1 4 4 4 4 1
A0 TIk. dispenser convert PCB A0
2 C P 2
50 91 2P coin mech. J44
3 J26 1.5K 3 10
90 42 42 42 42 4
J 4
5
42 92 92
1 1
2 2
80 1P tik. light
4 XH4P 60
80M
6 DBV
A0 7 AE 2431 D5E
6 C P A0
95 8
7 J27 Client selection fitting
80 60 CN1 CN2 50 50 50
8 1 1 1 1 C4140HM-9P
42 42 A0 A0
P 2 2 2 2
A0 TICK-CH.PCB A0 90 90 2P tik. dispenser
3 3 3 3 J5 J45 5K
80 90 42 20 20M 20M B0 1 3
4 4 4 4 1 1 1
TIk. dispenser convert PCB 90M 90M 90 2 1P rod POT
C P 2 2 2
E E A0
J28 1.5K 3 3 3
42
93
42
93
1 1
42
80 2P tik. light
B 4
20M
90M
C P
Notice: The color and the type of the wire express as follow. For example: 2 0 M 2 2 5 J46 5K
E 20M B0 1 3
Wire color :20 is single red C P 6 1 1
90M 90 2 2P rod POT
A Wire type: M is AWG24 UL1007 P 2 2 A
E A0
9 White I R AWG14 UL1005 3 3
8 Gray H Q AWG16 UL1005 Unite mm C P
7 Violet G P AWG18 UL1007
6 Blue F O AWG20 UL1007 Prop. : Design Technics
Name:
5 Green E Shielding layer N AWG22 UL1007 4001~5000 ±50 U niv ersal Sp ace
A mu sem ent mach ine
4 Yellow D Light Blue M AWG24 UL1007 3001~4000 ±40
Drawing Standard
3 Orange C Light Green L AWG26 UL1007 2001~3000 ±30 Chart Drawing NO. Version:
32
2 Red B Pink K AWG28 UL1007 1001~2000 ±20 A3
SHDY-PX-00(2/2)
1 Brown
Wire Color
A Black J AWG30 UL1007
Wire Type Tolerance
0~1000 ±10
UNIS Collate
Check Approve
Date:
Path:
8-Apr-2016
Page
H:\数据恢复\D\game data\game data\manual\strike pro fishing深海钓鱼\s深
1 2 3 4 5 6 7 8
S
Strike pro Fiishing Manu
ual Rev.1.01
1
Internatio
onal Supp
port Cente
er USA Sup
pport Cen
nter
Tel: +1
1-905-477-2
2823 Tel: 972-24
41-4263
Fax: +1
1-905-477-2660 Fax: 214-91
19-4918
Em
mail: service
e@universa
al-space.com
m Email:tsnelling@unisussasupportce
enter.com
(Contacct: Clementt Yau) (C
Contact: Tim
m Snelling)
333