Professional Documents
Culture Documents
P0108 - MAP Sensor Circuit High
P0108 - MAP Sensor Circuit High
Possible Causes:
1. Faulty MAP Sensor: The Manifold Absolute Pressure (MAP) sensor may be malfunctioning,
resulting in a high voltage signal.
2. Wiring or Connector Issues: There could be a problem with the wiring harness or connector
leading to the MAP sensor, such as a short circuit or loose connection.
3. ECU Issue: A fault in the Engine Control Unit (ECU) could result in the MAP sensor receiving
a high voltage.
Possible Symptoms:
1. Check Engine Light: The check engine light may illuminate on the dashboard.
2. Abnormal Engine Performance: A faulty MAP sensor can cause improper air-fuel mixture,
resulting in abnormal engine performance and reduced fuel efficiency.
3. Engine Stalling: In some cases, the engine may stall or hesitate during acceleration or idle.
Solution:
1. Inspect MAP Sensor: Check the condition of the MAP sensor and replace it if necessary.
2. Check Wiring and Connectors: Inspect the wiring harness and connectors for any damage,
corrosion, or loose connections. Repair or replace as necessary.
3. Check ECU: If all other components check out fine, consider checking the ECU for any faults
or errors.
P0108 - MAP सेंसर सर्कि ट उच्च वोल्टे ज:
संभावित कारण:
1. खराब MAP सेंसर: मैनिफोल्ड एब्सोल्यूट प्रेशर (MAP) सेंसर में खराबी हो सकती है , जिससे उच्च
वोल्टे ज सिग्नल प्राप्त हो सकता है ।
2. तार या कनेक्टर समस्या: MAP सेंसर तक पहुं चने वाले तारों या कनेक्टर में किसी समस्या का सामना
किया जा सकता है , जैसे कि एक शॉर्ट सर्कि ट या ढीला कनेक्शन।
3. ECU की समस्या: इं जन कंप्यूटर (ECU) में खराबी हो सकती है , जिससे MAP सेंसर को उच्च वोल्टे ज
प्राप्त हो सकता है ।
संभावित लक्षण:
समाधान:
1. MAP सेंसर की जाँच: MAP सेंसर की स्थिति की जाँ च करें और यदि आवश्यक हो, तो इसे बदलें।
2. तार और कनेक्टर की जाँच: MAP सेंसर तक पहुं चने वाली तारों और कनेक्टर की जाँ च करें और किसी
भी समस्या को ठीक करें ।
3. ECU की जाँच: अगर अन्य सभी घटकों में कोई समस्या नहीं है , तो ECU की जाँ च करें ।