Professional Documents
Culture Documents
TDS Ecomaxx WetLimeMortar Fine v01 Jan2024
TDS Ecomaxx WetLimeMortar Fine v01 Jan2024
Ecomaxx Wet LimeMortar Fine is a natural lime-based mortar. It is formulated for interior applications only.
Ideal for plastering in building, rehabilitation and restoration of Heritage Buildings and Structures. It is applied
in one or two layers depending on the type of finish, such as smooth, trowelled and engraved textures, as
well as pitted finishes, ashlar, sgraffito, etc
PRODUCT DESCRIPTION
Features: Storage:
Highly breathable. Keep in original pack, closed and in a cool and dry
Ultra-low VOCs emissions place. Keep from freezing and avoid direct sun
Free of formaldehyde emissions. exposure. Unopened, it may be conserved for at least
Excellent adhesion. 12 months from the date of manufacture.
Tough and long-lasting.
Good workability.
Absorbs CO2. APPLICATION INSTRUCTION
Suitable for interiors only.
Application surfaces:
Physical and Technical Properties
It can be applied on all types of common surfaces in
Nature - Hydrated and other lime construction: brick, concrete, masonry, etc.
components in powder
Curing time - 48 to 72 hours If the substrate has salt deposits, brush and apply
(Depends on condition Graphenstone Neutralysal Premium.
of substrate and
weather) On substrates without porosity, apply Graphenstone
Contak Premium.
Adhesive Strength - ≥ 0.5 N/mm2
Product preparation:
Format:
No preparation required as it is in ready-to-use paste
In plastic pail of 30 kg. It is supplied ready-to-use form.
without addition of water.
Graphenstone Far East Sdn Bhd (1239335-T) | No. 1, Level 2, Jalan PJU 1A/41B, Pusat Perdagangan NZX, Ara Jaya, 47301 Petaling
Jaya, Selangor, Malaysia. | Tel: +6 03-7885 0791 | www.graphenstonefareast.com | info@graphenstonefareast.com
Application method: The parts that are not going to be treated must be
protected (glass, wood, etc.).
Apply a first level coat and then apply a second one
evenly until achieving the desired thickness. At the Do not mix with other products or specific properties
start of drying, finish according to the desired finish. may change.
If there are supports of different nature, meshes must
be used. Complementary products:
Graphenstone® products are recommended for the
Drying: preparation of the substrate and protection of the
finish. Refer to the relevant Technical Data Sheets.
In conditions of 25 ºC and 60% relative humidity: 24-
48 hours between layers of mortar, 24 hours for its
protection or at least 4 days for Graphenstone® ADDITIONAL INFORMATION
painting. The carbonation process mainly occurs
during the first 30 days. Usage warnings:
None in particular for normal use and people who do
Tools: not have special pathologies. Protect skin and eyes
especially. Apply with good ventilation, do not inhale
Application: masonry brush, trowel, double-mix product. Keep out of reach of children.
projecting machine, level.
Safety information:
Notes:
For information regarding safety, physical, ecological
Do not water for hardening, it hardens by absorbing and toxicological information see the latest version of
atmospheric CO2. the product’s Material Safety Data Sheet.
Do not apply to surfaces in constant contact with water.
Technical support:
It is recommended to protect the treated surface from
rain for at least 4 days. For further information, please contact with local
distributor or manufacture:
If not being painted it is recommended to consolidate info@graphenstonefareast.com
and protect with Graphenstone Minerseal Premium.
Graphenstone Far East Sdn Bhd (1239335-T) | No. 1, Level 2, Jalan PJU 1A/41B, Pusat Perdagangan NZX, Ara Jaya, 47301 Petaling
Jaya, Selangor, Malaysia. | Tel: +6 03-7885 0791 | www.graphenstonefareast.com | info@graphenstonefareast.com