Department of Electronics and Telecommunication Eng. SESSION: Jan-Jun 2024 SUB: BASIC ELECTRONICS Engg. (EC10508) Submission Date: 1 April 2024 ASSIGNMENT – II 1. What are the characteristics of an ideal and a practical Op-amp. Discuss in detail. 2. Discuss following with respect to Op-amp. i. Voltage transfer curve ii. Block Diagram iii. Pin diagram of IC LM741 iv. Symbols 3. Sketch constructional details of n-channel depletion type MOSFET. Also, discuss its Drain and Transfer characteristics curve. 4. Define following with respect to field Effect Transistors (with appropriate diagrams) i. Channel ii. Source iii. Drain iv. Gate v. Pinch -off 5. Define Boolean function. State and prove Boolean Identities (All). 6. Fill in the blanks. Also. Provide relevant information such as truth table and logical expression. i. The output of a logic gate is ″1″ when all its inputs are at logic ″0″. The gate is ………. ii. A bulb in the staircase has two switches, one switch being on the ground floor and the other one on the first floor. The bulb can be turned ON and also can be turned OFF by any one of the switches, irrespective of the state of the other switch. The logic of switching on the bulb resembles ______. iii. If A is LOW or B is LOW or BOTH are LOW, then X is LOW. If A is HIGH and B is HIGH, then X is HIGH. These rules specify the operation of a(n) ________. iv. The output of an XOR gate is HIGH only when ________.