Professional Documents
Culture Documents
A3 - Axial Loading
A3 - Axial Loading
A3 - Axial Loading
Two semicircular brass layers attached by brazing to a rectangular steel layer that make up a
150 mm metallic rod AB. Figure Q3 depicts the metallic rod's cross section area. A rigid cap
plate at B is attached to the rod AB and an axial tensile force of P = 40 kN is applied on it.
Given that the rod AB is fixed at point A on a platform and the elastic moduli of steel and brass
of rod AB are ESt = 200 GPa, EBr = 97 GPa, respectively.
Figure Q3