Professional Documents
Culture Documents
FisherKit
FisherKit
FisherKit
Control Valves
Fisher Kit Program
Fisher Kit and Components
Chesterton’s Fisher Kits are specifically designed
to be used on Fisher’s E-Body pneumatically actuated
control valves. The kit contains all the parts necessary
to repack the valve in the field using Chesterton’s
Live Loading System. All packing rings are cut to allow
installation without removal of the valve actuator,
simplifying the valve repacking procedure in the field.
Kit contents include:
• One packing set
• One pre-cut carbon spacer
• Two pre-engineered live loading assemblies
• Two new gland studs and nuts
5800T
The 5800T wedge set
was developed as a low stem
friction, low temperature
valve sealing system designed
for use in emission, steam
applications and in friction
sensitive valves.
1724E
The 1724E die formed set
was developed for control
valves used in steady state
service in the most friction
sensitive applications as well
as oxidizing applications
within its temperature range.
FISHER KIT NUMBER NOMINAL PRESSURE 5800T 5800E 1724E
AND PACKING SIZE SIZE CLASS REORDER NO. REORDER NO. REORDER NO.
1 – 0.375 x 0.875 1 and 1.5 150# – 300# 009045 147995 148004
2 – 0.500 x 1.000 2, 3 and 4 150# – 300# 009046 147996 148005
3 – 0.750 x 1.375 6 and 8 150# – 300# 009047 147997 148006
4 – 0.750 x 1.375 6 and 8 600# 009048 147998 148007
Technical data reflects results of laboratory tests and is intended to indicate general characteristics only. A. W. Chesterton Company disclaims all warranties expressed,
or implied, including warranties of merchantability and fitness for a particular purpose or use. Liability, if any is limited to product replacement only.