Professional Documents
Culture Documents
Khadak Narla MBR
Khadak Narla MBR
AURANGABAD.
JOB NO : - 042205
REPORT NO : - CT/AUB/R/05021/23
l!AIE
WATER
DEPTH IN BORE
BORE CORINGIN TABLE
LOCATION SOIL/SAND TERMINATION
HOLE NO. ROCKIN M DEPTH IN
INM DEPTH IN M
M
KHADAK
NARLAMBR
ter table observed for BH01; it may vary at the time of actual excavation on
site due to seasonal changes.
The Penetration Test on soil was conducted according to IS: 2131-1981., a split
is driven into the soil by 63.5kg weight falling through 75 ern height. After an
ern, the no. of blows required to drive the sampler an additional 30cm is
known as .on resistance or "N" value. The "N" values are indicative of the relative
SPT spoo was inspected for visual identification of strata as per
polythene bags duly numbered for proper identification.
m T~~~~~le~::~
3.2.1
Bore No. 0
Effective N after
Depth N after
N(Observed) Pressure eN Overburde
'm' Dilatancy
(kg/ems) n
d
0.0 to
49 0.282 1.28 63
1.5
1.5 to
as a 50 0.567 1.17 59
3.0
(Murum)
Small Pieces
CIVIL TECH
NET sm BEAIUNG PRESSURES BASID ON RMR
TION No. I II III IV V
of rock Very good good Fair Poor Very Poor
100-81 80·61 60-41 40-21 2{)-0
600-448 440-288 280·151 145.90-58 55-45-40
0-1965 gives the code of Practice for design and construction of Raft
fa The maximum differential settlement should not exceed 40 mm in foundation
I and 25 mm in sandy soil. Maximum settlement should generally be limited to
values: Raft foundation on clay: 65 to 100 mm. Raft foundation on sand: 40 to
ventional method, the allowable bearing pressure is found using the following
formulae:
Where, Ql Q2 are allowable soil pressure under raft foundation in Kgjm2. (Using a
three) .
10
NABL Accredited Mate ial Testing Lab I Soil Investigation I NDT I Structural Audit
(B CIVil TECH
~
Jr. Lab Manager,
Shweta D. Wagb
12
NABL Accredited Mate ·al Testing Lab I Soil Investigation I NOT I Structural Audit I Survey