9. What Qos Parameters Are Required To Trfers Credential File From
One Source To A Destination? The main QoS parameters required is Bandwidth and Data loss.
10. What Is Voice Circuit?
It is specially used for voip only because it have ports enable on it which allow voip traffic.
11. Sw_a Revision Number 2
The final revision number is 25.
5. What Is A Load Balancer?
It is a network device which is used to balance the load in on available nodes.
6. What Is Synchronization? It is said to be the property of IBGP.
7. What Will Be The Broadcast Ip Of The 202.4.81.96/27?
202.4.81.127
8. What Is The Total Range Of Multicast Addresses In Ipv4?
13. What Does Dns Do In A Network?
DNS is domain name server. It is used to trlate IP into domain name and vice versa
14. What Is A Core Network?
A core network is where the entire main network lives. Without core network, the whole network cannot be run. All routers and switches are connected to their core network.
15. At Which Layer Of Osi Does Tcp/ip Work?
TCP/IP is two protocols. IP work at layer 3 and TCP at layer 4
16. At Which Layer Of Internet Protocol Suite, Icmp Work?
It works at internet layer
17. Is Rip V2 Is Link State Protocol?
No, it is distance vector protocol
18. What Is Access Layer In Switching Network?
The access layer is said to be the layer in which host are connected with the switch it is a end layer connected host with the switch. Layer 2 switches are mostly used in access layer.
19. What Is Private Vlan Used For?
Private vlan is a concept in vlan you can have vl in a single vlan. It is used in where hundreds of vl are configured. You only need to make one vlan and all other vl in this vlan.
20. What Types Of Routers Are Allowed In Totally Stubby Areas?
In totally stubby area, inter area and intra area route and default route are allowed.
21. In A Network Of Routers And Switches, What Is The Difference
Between Routing And Switching? Switching make the final ultimate delivery while routing select the best available path in a network.
22. How Can You Get A Continuous With This Ip On Router
176.9.41.131? Just add –t at the end of the IP… like 176.9.41.131 –t
23. What Is The Purpose Of Weight Attribute On Ospf?
1. Home Many Types Of Rip Messages? There are two type of RIP messages, these are request and respond.
2. What Will Be The Net Mask For The 176.9.59.4/16?
255.255.0.0
3. What Is The Main Purpose Of Areas In Ospfv2?
Routers networks are divided in to areas which are they connected to backbone area@The areas help you to give performance and easy to handle big network
4. What Is The Administrative Distance Of Egp?
The administrative distance for EGP is 140. 12. What Are The Two Methods For Reducing The Number Of Ibgp Connection In A Network? These are confederation and route reflector