Professional Documents
Culture Documents
Dldprojectproposal801802813 240305171504 Ef7412e2
Dldprojectproposal801802813 240305171504 Ef7412e2
Faisalabad Campus
UNIVERSITY OF ENGINEERING AND TECHNOLOGY, LAHORE
Objective:
The objective of the digital dice is to create a circuit that stimulates the rolling of the six-sided dice,
producing a random number between 1 and 6each time it is triggered. This project aims to demonstrate
the principles of digital logic design, especially control logic implementation.
Project Description:
The project contains a bread board upon which different component of circuits are connected. 4017 IC
and 555 IC are attached to the pins of the bread board. Different resistors and capacitor are also used.
Random LED will turn ON after each time the final wire connected to the battery.
Expected Outcome:
As a result, when all the circuit implementation is done then after connecting the final wire random
LED turns on.
Resources Required:
Following are the some equipments which are required for this project:
1) Bread Board 6) Push Button
2) IC 4017 7) 9V Battery
3) IC 555 8) Few Connecting Wires
4) 1k Resistors(2) 9) Switch
5) 6 LEDs 10) 330 ohm Resistors (6)