Professional Documents
Culture Documents
Spec ST1020 9851 2262 01
Spec ST1020 9851 2262 01
ST1020 features
Load frame Power frame
• A Z-bar front-end for efficient loading and mucking • Atlas Copco unique powertrain including an upbox, a
• An aggressively designed “high shape” factor bucket, re- transverter, a combined transmission and converter -
ducing the need for multiple passes to fill the bucket allowing space for the “footbox” plus low and short back
• Easy to change bucket and cylinders with split-cap pin end
retention system • Electronic transverter and engine control system for
• Boom support and lock for safe work under boom smooth and precise shifting
• A high power-to-weight ratio complemented by a fully
Operator’s compartment integrated powertrain, automatically matching the gear
Ergonomically and spacious designed compartment for selection to the load - producing a high tractive effort
maximum safety and minimal operator fatigue with: without wheel spin
• maximized legroom because of the Atlas Copco’s • Stacked v-core radiator and charge air cooler: easy to
“footbox” replace damaged tubes and to clean
• comfortable operator’s seat offering improved ergonomic
positioning, body orientation and generous shoulder and General
hip room • Great serviceability with centerlized service points
• compliant with sound and vibration regulations to mini- • Long-life roller bearing centre hinge
mize operator’s fatigue; reduced noise level to 82 dB(A) • Anti skid material at service access points
inside the cab • Maximum operating ambient temperature 52°C (125F)
• new, wider windows for safety and enhanced operator’s • Central manual lubrication
visibility • Hydraulic hoses, electric cables and hot surfaces are well
• 3 point mounting points for entry and exit from operator’s protected
compartment
ST1020 specifications
Capacities Motion times Matching Mine Trucks
SAE regulations Boom for ST1020
Tramming capacity 10 000 kg Raising 7.9 seconds Mine Truck MT431B
Breakout force, hydraulic 14 958 kg Lowering 7.1 seconds Mine Truck MT436B
Breakout force, mechanical 31 750 kg Bucket
Dumping 2.7 seconds
Rolling back 3.9 seconds
Engine Brakes
• Detroit Diesel Engine ...................................Series 50 DDEC Fully enclosed, force cooled, multiple wet discs at each wheel
• Power Rating at 2100 rpm............................186 kW/250 HP end
• Maximum torque at 1350 rpm......................1 085 Nm • Service, parking and emergency brakes .......SAHR system
• MSHA Part 7 ventilation rate .......................354 m3/min
• Ventilation particulate index.........................127 m3/min
Tires
• Rock Tough purifier and silencer
• Dry type air cleaner Tubeless, smooth tread design for underground mine service
• Exhaust heat protection • Bridgestone...................................................STMS
• Remote engine oil drain • Tires ..............................................................18.00 x 25, 24 Ply,
• Cooling package with v-core radiator L-5S
Tank
• Hydraulic tank capacity................................189 liters
• Anti-siphon fuel supply
Electrical system
• Voltage, system start & accessories ..............24 V
• Alternator, high output
• Hydraulic warning system
• Rock Tough protection lights
• Isolation switch lockout
R3450
2000 x 45° Chamfered Corner
3400
4025
4330
1st gear (kph) 5.1 5.0 4.9 4.8 4.7 4.6 4.5 4.4 4.3 4.2 4.1 3.8 3.6
2nd gear (kph) 9.2 8.8 8.5 8.1 7.8 7.5 7.0 6.7 6.3 6.0 5.6 4.5
3rd gear (kph) 16.0 14.8 13.7 12.5 11.2 10.0 8.1 6.8 5.4
Percent grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 16.0 18.0 20.0 25.0 30.0
Ratio 1:12 1:10 1:8 1:7 1:5 1:4
1st gear (kph) 5.1 4.9 4.8 4.6 4.5 4.3 4.2 4.0 3.9 3.8 3.6 3.2 2.8
2nd gear (kph) 8.9 8.5 8.0 7.5 7.1 6.5 5.9 5.4 4.9 4.3 3.6
Illustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment
• Axle load, front end ......................................10 000 kg*
• Axle load, back end ......................................16 300 kg*
subjects to change without notice. Consult your Atlas Copco sales company for specific information.
*Standard equipped vehicle with empty bucket
5060
(H1)
40°
3400
2355 1945
1750 1665 (T2)
(H2)
15° 415
3370
2885 1855 1755
(T1)
3606
9745 1920
(L1)
1310
2260
2490
(W)
9851 2262 01
• Dimensions shown are based on standard vehicle configuration with 27 mm tire deflection.
• All dimensions are shown in millimeters.