Professional Documents
Culture Documents
Hyundai Wia Kia Turning Centers
Hyundai Wia Kia Turning Centers
Hyundai Wia Kia Turning Centers
2200 Series
Global-standard CNC Turning Center with High Speed, Rigidity and Productivity
MACHINE TOOL
HYUNDAI WIA
APPLICATIONS & PARTS
Reduced machining time by HYUNDAI WIA's Technique
SE Series has been designed with robust box guide, spindle and travel system, maximizing precision and minimizing thermal
displacement when process the products.
EXPERIENCE
THE NEW TECHNOLOGY
MACHINING CAPABILITY
O.D Turning U-Drill
(Material : SM45C) (Material : SM45C)
MACHINE TOOL
HYUNDAI WIA
REDUCTION OF NON-CUTTING TIME BY FAST RAPID SPEED
30 Bed Slant
ALL-IN-ONE TYPE OF BED
Optimal Structural Analysis
Structural analysis was applied to the design of the machine to increase the tool
post body and reduce the machine’s height so as to maintain the bed’s dynamic
SE Series
ENHANCED VIBRATION ABSORPTION THANKS TO INCREASED GROUND AREA
06
+
07
EXPERIENCE
THE NEW TECHNOLOGY
Floor Space (L×W) - Standard Bed Floor Space (L×W) - Long Type Bed
GUIDEWAY
High-Speed Roller LM Guideway
Linear roller guideways are applied to reduce non-cutting time and
bring high rigidity.
Long Lasting, High Accuracy & Excellent Performance CNC Turning Center
Spindle Specifications
ITEM Spindle Speed Motor (Max./Cont.) Torque (Max.) Driving Method
MACHINE TOOL
HYUNDAI WIA
HEAVY DUTY CUTTING & HIGH ACCURACY
MAIN SPINDLE
Specialized in High-speed and Rough Cutting
The 6” main spindle is designed for high-speed machining by applying two and three-row ball bearings to the front
and rear, respectively. In addition, the 8” and 10” main spindles are designed to match the rigid spindle structure by
SE Series
enhanced performance of the work and increased processing stability by minimizing bearing damage caused by inflow
of the oil.
Bar Capacity
Ø350 (13.8″)
09
EXPERIENCE
THE NEW TECHNOLOGY
Max. Turning Length
unit : mm(in)
8 inch 307 (12.1″) 288 (11.3″) 558 (22″) 508 (20″) Ø65 (Ø2.6″)
Servo Turret
No. of Tools Tool Size (O.D/I.D) Indexing Time
Quantity of mill turret tools: Std. 2ea / Opt. 24ea - Various machining with increased capacity (Prior model : max. 12ea)
Turret
MACHINE TOOL
HYUNDAI WIA
VARIOUS DRIVEN PRECISION BMT TOOL HOLDERS
SERVO TURRET
Servo Turret
The turret of SE series is applied with high performance AC servo motor,
improving machining reliability. 3-piece coupling shows excellent performance
in indexing. Powerful hydraulic tool clamping minimizes tool tip deviation
caused by load.
SE Series
high pressure coolant and it shows optimum
performance in machining difficult-to-cut 20bar
material.
10
+
11
EXPERIENCE
THE NEW TECHNOLOGY
MILL TURRET
BMT45 Turret (Mill Turret)
The BMT turret secures the tool with four bolts and key on the tool
mounting surface of the turret, making it possible to powerfully fix the
tool, ensuring high reliability in rigidity and precision.
Special Tool
The SE series can process high value-added products using a variety of rotating
tools. In particular, there is a multi-holder for attaching a variety of tools to one
holder, and an eccentric rotary tool for handling eccentric parts without additional
axis travel, which can realize integration of process with one machine.
MACHINE TOOL
HYUNDAI WIA
CHIP DISPOSAL SOLUTION
Chip Conveyor
Timely and effective disposal of chips will enhance productivity as well as the
working environment.
< Chip Discharge Height - Opt.1 : 860mm (33.9"), Opt. 2 : 1,200mm (47.2") >
SE Series
Highly efficient when disposing a lot of chips. Capable of handling stringy chips..
Chip Type : Finely broken chip blown out Material : cast Iron, Nonferrous
Scraper
Convenient for shortly cut chips. Front-Right
Chip Type : The lower portion of micro-chips Material : Steel, Casting Direction
12
❖ Screw +
Compresses and ejects chips to reduce chip Trouble. 13
Chip Type : Powder, Micro Chip Material : AL
❖ Drum Filter
EXPERIENCE
THE NEW TECHNOLOGY
Advantageous in precision, as the chips do not flow in to the coolant nozzle.
❖ When ordering a screw or drum filter chip conveyor, prior consult with hyudai wia’s sales person.
Standard Coolant (Nozzle) Chuck Coolant (Upper Chuck) Chuck Air Blow (Upper Chuck) Air Gun
MACHINE TOOL
HYUNDAI WIA
SMART SOFTWARE
Dialogue Program (Smart Guide-i)
This software offers the maximum user convenience through dialogue manipulation from setup
to processing. This includes writing processing programs and simulation checks.
SE Series
This software improves processing precision by minimizing thermal
deformation from changes in external environments and machining.
EXPERIENCE
THE NEW TECHNOLOGY
and frequently used features.
2. Manual Viewer
This software enables users to view electronic manuals right from the
tool. (Only in iHMI tools)
3. Scheduling
3 4
This software enables viewing/setting up directly from the tool. This
allows such actions as managing customer’s tool schedules and
schedule notification. (Only in iHMI tools)
4. Operation Memo
This software is capable of managing customer notes such as tool
information and issues. (Only in iHMI tools)
SPECIFICATIONS
SE2200A Series Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Spindle A MA LA LMA LMSA Electric Device A MA LA LMA LMSA
Main Sp. Hollow Chuck 3 Jaw 6″ ● ● ● ● ● 1Color : ■ ● ● ● ● ●
Main Sp. Solid Chuck 3 Jaw 6″ ○ ○ ○ ○ ○ Call Light 2Color : ■■ ○ ○ ○ ○ ○
Sub Sp. Hollow Chuck 3 Jaw 5″ - - - - ● 3Color : ■■■ ○ ○ ○ ○ ○
Sub Sp. Solid Chuck 3 Jaw 5″ - - - - ○ Call Light & Buzzer 3Color : ■■■B ○ ○ ○ ○ ○
Standard Soft Jaw (1set) ● ● ● ● ● Electric Cabinet Light ○ ○ ○ ○ ○
Chuck Clamp Foot Switch ● ● ● ● ● Remote MPG ○ ○ ○ ○ ○
2 Steps Hyd, Pressure Device ○ ○ ○ ○ ○ Work Counter Digital ○ ○ ○ ○ ○
Spindle Inside Stopper ☆ ☆ ☆ ☆ ☆ Total Counter Digital ○ ○ ○ ○ ○
Main Spindle Cs-axis (0.001°) - ● - ● ● Tool Counter Digital ○ ○ ○ ○ ○
Sub Spindle Cs-axis (0.001°) - - - - ● 6ea ○ ○ ○ ○ ○
Multi Tool Counter
Chuck Open/Close Confirmation Device ● ● ● ● ● 9ea ○ ○ ○ ○ ○
2 Steps Chuck Foot Switch ○ ○ ○ ○ ○ Electric Circuit Breaker ○ ○ ○ ○ ○
Sub Chuck Foot Switch - - - - ● AVR (Auto Voltage Regulator) ☆ ☆ ☆ ☆ ☆
Turret 25kVA ○ ○ ○ ○ -
Transformer
Tool Holder ● ● ● ● ● 30kVA - - - - ○
Mill Turret BMT - ● - ● ● Auto Power Off ○ ○ ○ ○ ○
Straight Milling Head (Axial) Collet Type, 2ea - ● - ● ● Measurement
Angular Milling Head (Radial) Collet Type, 2ea - ● - ● ● Q-Setter ○ ○ ○ ○ ○
Straight Milling Head (Axial) Adapter Type - ○ - ○ ○ Automatic Q-Setter ○ ○ ○ ○ ○
Angular Milling Head (Radial) Adapter Type - ○ - ○ ○ Work Close Confirmation Device TACO ○ ○ ○ ○ ○
Boring Sleeve ● ● ● ● ● (Only for Special Chuck) SMC ○ ○ ○ ○ ○
Drill Socket ○ ○ ○ ○ ○ Work Setter ☆ ☆ ☆ ☆ ☆
U-Drill Cap ● ● ● ● ● X axis ○ ○ ○ ○ ○
Linear Scale
Angle Head ● ● ● ● ● Z axis ○ ○ ○ ○ ○
Angle Head - ☆ - ☆ ☆ Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆ ☆ ☆ ☆
Tail Stock & Steady Rest Environment
Hydraulic NC Tail Stock (Std. Live Center) ○ ○ ● ● - FANUC ○ ○ ○ ○ ○
Air Conditioner
High Precesion Live Center ☆ ☆ ☆ ☆ - iTROL ○ ○ ○ ○ ●
Tail Stock Foot Switch ○ ○ ○ ○ - Dehumidifier ○ ○ ○ ○ ○
Coolant & Air Blow Oil Mist Collector ☆ ☆ ☆ ☆ ☆
Standard Coolant (Nozzle) ● ● ● ● ● Oil Skimmer (Only for Chip Conveyor) ○ ○ ○ ○ ○
Chuck Coolant (Upper Chuck) ○ ○ ○ ○ ○ MQL (Minimal Quantity Lubrication) ☆ ☆ ☆ ☆ ☆
Gun Coolant ○ ○ ○ ○ ○ Fixture & Automation
Through Spindle Coolant (Only for Special Chuck) ☆ ☆ ☆ ☆ ☆ Auto Door High-speed ○ ○ ○ ○ ○
Chuck Air Blow (Upper Chuck) ○ ○ ○ ○ ○ Auto Shutter (Only for Automatic System) ○ ○ ○ ○ ○
Sub Chuck Air Blow - - - - ○ Sub Operation Pannel ☆ ☆ ☆ ☆ ☆
Turnmill Through Coolant - ○ - ○ ○ Bar Feeder Interface ○ ○ ○ ○ ○
Tail Stock Air Blow (Upper Tail Stock) ○ ○ ○ ○ - Bar Feeder (FEDEK) ☆ ☆ ☆ ☆ ☆
Turret Air Blow ☆ ☆ ☆ ☆ ☆ Extra M-Code 4ea ○ ○ ○ ○ ○
Air Gun ○ ○ ○ ○ ○ Automation Interface ☆ ☆ ☆ ☆ ☆
Through Spindle Air Blow (Only for Special Chuck) - - - - - 16 Contact ○ ○ ○ ○ ○
I/O Extension (IN & OUT)
0.5Bar ● ● ● ● ● 32 Contact ○ ○ ○ ○ ○
6Bar ○ ○ ○ ○ ○ Main SP. ○ ○ ○ ○ ○
High Pressure Coolant Parts Catcher
20Bar ○ ○ ○ ○ ○ Sub SP. - - - - ○
70Bar ○ ○ ○ ○ ○ Sub Spindle Work Pusher (Spring Type) - - - - ○
Power Coolant System (For Automation) ☆ ☆ ☆ ☆ ☆ Sub Spindle Work Ejector (Pneumatic Type) - - - - ○
Coolant Chiller Turret Work Pusher (For Automation) ☆ ☆ ☆ ☆ ☆
- - - - -
(When selecting Sub Tank Type, Chip Conveyor) Parts Conveyor (Required Main Parts Catcher) ○ ○ ○ ○ ○
Chip Disposal Semi Automation System ☆ ☆ ☆ ☆ ☆
Front(150ℓ[39.6 gal]) ● ● - - - Hyd. Device
Coolant Tank Front(200ℓ[52.8 gal]) - - ● ● ● Standard Hyd. Cylinder Hollow ● ● ● ● ●
Rear(150ℓ[39.6 gal]) ○ ○ ○ ○ ○ Standard Hyd. Unit 15ℓ(4gal) ● ● ● ● -
Chip Conveyor Front (Right) ○ ○ ○ ○ ○ {35bar (507.6 psi)} 20ℓ(5.3gal) - - - - ●
(Hinge/Scraper/Screw) Rear (Rear) ○ ○ ○ ○ ○ S/W
Special Chip Conveyor (Drum Filter) - - - - - SmartGuide-i ● ● ● ● ●
Conversational program
Standard HW-DPRO ○ ○ ○ ○ ○
○ ○ ○ ○ ○
(180ℓ[47.5 gal]) Thermal Displacement Compensation (HW-TDC) ○ ○ ○ ○ ○
Swing Tool Monitoring (HW-TM) ○ ○ ○ ○ ○
○ ○ ○ ○ ○
Chip Wagon (200ℓ[52.8 gal]) Machine Guidance (HW-MCG) ● ● ● ● ●
Large Size Energy Saving System (HW-ESS) ● ● ● ● ●
○ ○ ○ ○ ○
(330ℓ[87.2 gal]) DNC software (HW-eDNC) ○ ○ ○ ○ ○
Customized ☆ ☆ ☆ ☆ ☆ Machine Monitoring System (HW-MMS) ○ ○ ○ ○ ○
Safety Device Thermal Displacement Compensation Device ○ ○ ○ ○ ○
Total Splash Guard ● ● ● ● ● Premium Tool Operation ● ● ● ● ●
Back Spin Torque Limiter (BST) ● ● ● ● ● Manual Viewer ● ● ● ● ●
Torque Limiter ○ ○ ○ ○ ○ Scheduling ● ● ● ● ●
Fornt Door Interlock ● ● ● ● ● Operation Memo ● ● ● ● ●
Chuck Hydraulic Pressure Maintenance Interlock ☆ ☆ ☆ ☆ ☆
ETC
Tool Box ● ● ● ● ●
Customized Color Need Munsel No. ☆ ☆ ☆ ☆ ☆
CAD & CAM ☆ ☆ ☆ ☆ ☆
❖ Thermal Displacement Compensation device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
MACHINE TOOL
SE2200 Series Standard & Optional
HYUNDAI WIA
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Spindle SE2200 M L LM LMS Electric Device SE2200 M L LM LMS
Main Sp. Hollow Chuck 3 Jaw 8″ ● ● ● ● ● 1Color : ■ ● ● ● ● ●
Main Sp. Solid Chuck 3 Jaw 8″ ○ ○ ○ ○ ○ Call Light 2Color : ■■ ○ ○ ○ ○ ○
Sub Sp. Hollow Chuck 3 Jaw 5″ - - - - ● 3Color : ■■■ ○ ○ ○ ○ ○
Sub Sp. Solid Chuck 3 Jaw 5″ - - - - ○ Call Light & Buzzer 3Color : ■■■B ○ ○ ○ ○ ○
Standard Soft Jaw (1set) ● ● ● ● ● Electric Cabinet Light ○ ○ ○ ○ ○
Chuck Clamp Foot Switch ● ● ● ● ● Remote MPG ○ ○ ○ ○ ○
2 Steps Hyd, Pressure Device ○ ○ ○ ○ ○ Work Counter Digital ○ ○ ○ ○ ○
Spindle Inside Stopper ☆ ☆ ☆ ☆ ☆ Total Counter Digital ○ ○ ○ ○ ○
Main Spindle Cs-axis (0.001°) - ● - ● ● Tool Counter Digital ○ ○ ○ ○ ○
Sub Spindle Cs-axis (0.001°) - - - - ● 6ea ○ ○ ○ ○ ○
Multi Tool Counter
Chuck Open/Close Confirmation Device ● ● ● ● ● 9ea ○ ○ ○ ○ ○
2 Steps Chuck Foot Switch ○ ○ ○ ○ ○ Electric Circuit Breaker ○ ○ ○ ○ ○
Sub Chuck Foot Switch - - - - ● AVR (Auto Voltage Regulator) ☆ ☆ ☆ ☆ ☆
Turret 25kVA ○ ○ ○ ○ -
Transformer
Tool Holder ● ● ● ● ● 30kVA - - - - ○
Mill Turret BMT - ● - ● ● Auto Power Off ○ ○ ○ ○ ○
Straight Milling Head (Axial) Collet Type, 2ea - ● - ● ● Measurement
Angular Milling Head (Radial) Collet Type, 2ea - ● - ● ● Q-Setter ○ ○ ○ ○ ○
Straight Milling Head (Axial) Adapter Type - ○ - ○ ○ Automatic Q-Setter ○ ○ ○ ○ ○
Angular Milling Head (Radial) Adapter Type - ○ - ○ ○ Work Close Confirmation Device TACO ○ ○ ○ ○ ○
SE Series
Angle Head - ☆ - ☆ ☆ Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆ ☆ ☆ ☆
Tail Stock & Steady Rest Environment
Hydraulic NC Tail Stock (Std. Live Center) ○ ○ ● ● - FANUC ○ ○ ○ ○ ○
Air Conditioner
High Precesion Live Center ☆ ☆ ☆ ☆ - iTROL ○ ○ ○ ○ ●
Tail Stock Foot Switch ○ ○ ○ ○ - Dehumidifier ○ ○ ○ ○ ○
Coolant & Air Blow Oil Mist Collector ☆ ☆ ☆ ☆ ☆
Standard Coolant (Nozzle) ● ● ● ● ● Oil Skimmer (Only for Chip Conveyor) ○ ○ ○ ○ ○
Chuck Coolant (Upper Chuck) ○ ○ ○ ○ ○ MQL (Minimal Quantity Lubrication) ☆ ☆ ☆ ☆ ☆
16
Gun Coolant ○ ○ ○ ○ ○ Fixture & Automation
+
Through Spindle Coolant (Only for Special Chuck) ☆ ☆ ☆ ☆ ☆ Auto Door High-speed ○ ○ ○ ○ ○ 17
Chuck Air Blow (Upper Chuck) ○ ○ ○ ○ ○ Auto Shutter (Only for Automatic System) ○ ○ ○ ○ ○
Sub Chuck Air Blow - - - - ○ Sub Operation Pannel ☆ ☆ ☆ ☆ ☆
EXPERIENCE
THE NEW TECHNOLOGY
Turnmill Through Coolant - ○ - ○ ○ Bar Feeder Interface ○ ○ ○ ○ ○
Tail Stock Air Blow (Upper Tail Stock) ○ ○ ○ ○ - Bar Feeder (FEDEK) ☆ ☆ ☆ ☆ ☆
Turret Air Blow ☆ ☆ ☆ ☆ ☆ Extra M-Code 4ea ○ ○ ○ ○ ○
Air Gun ○ ○ ○ ○ ○ Automation Interface ☆ ☆ ☆ ☆ ☆
Through Spindle Air Blow (Only for Special Chuck) - - - - - 16 Contact ○ ○ ○ ○ ○
I/O Extension (IN & OUT)
0.5Bar ● ● ● ● ● 32 Contact ○ ○ ○ ○ ○
6Bar ○ ○ ○ ○ ○ Main SP. ○ ○ ○ ○ ○
High Pressure Coolant Parts Catcher
20Bar ○ ○ ○ ○ ○ Sub SP. - - - - ○
70Bar ○ ○ ○ ○ ○ Sub Spindle Work Pusher (Spring Type) - - - - ○
Power Coolant System (For Automation) ☆ ☆ ☆ ☆ ☆ Sub Spindle Work Ejector (Pneumatic Type) - - - - ○
Coolant Chiller Turret Work Pusher (For Automation) ☆ ☆ ☆ ☆ ☆
- - - - -
(When selecting Sub Tank Type, Chip Conveyor) Parts Conveyor (Required Main Parts Catcher) ○ ○ ○ ○ ○
Chip Disposal Semi Automation System ☆ ☆ ☆ ☆ ☆
Front(150ℓ[39.6 gal]) ● ● - - - Hyd. Device
Coolant Tank Front(200ℓ[52.8 gal]) - - ● ● ● Standard Hyd. Cylinder Hollow ● ● ● ● ●
Rear(150ℓ[39.6 gal]) ○ ○ ○ ○ ○ Standard Hyd. Unit 15ℓ(4gal) ● ● ● ● -
Chip Conveyor Front (Right) ○ ○ ○ ○ ○ {35bar (507.6 psi)} 20ℓ(5.3gal) - - - - ●
(Hinge/Scraper/Screw) Rear (Rear) ○ ○ ○ ○ ○ S/W
Special Chip Conveyor (Drum Filter) - - - - - SmartGuide-i ● ● ● ● ●
Conversational program
Standard HW-DPRO ○ ○ ○ ○ ○
○ ○ ○ ○ ○
(180ℓ[47.5 gal]) Thermal Displacement Compensation (HW-TDC) ○ ○ ○ ○ ○
Swing Tool Monitoring (HW-TM) ○ ○ ○ ○ ○
○ ○ ○ ○ ○
Chip Wagon (200ℓ[52.8 gal]) Machine Guidance (HW-MCG) ● ● ● ● ●
Large Size Energy Saving System (HW-ESS) ● ● ● ● ●
○ ○ ○ ○ ○
(330ℓ[87.2 gal]) DNC software (HW-eDNC) ○ ○ ○ ○ ○
Customized ☆ ☆ ☆ ☆ ☆ Machine Monitoring System (HW-MMS) ○ ○ ○ ○ ○
Safety Device Thermal Displacement Compensation Device ○ ○ ○ ○ ○
Total Splash Guard ● ● ● ● ● Premium Tool Operation ● ● ● ● ●
Back Spin Torque Limiter (BST) ● ● ● ● ● Manual Viewer ● ● ● ● ●
Torque Limiter ○ ○ ○ ○ ○ Scheduling ● ● ● ● ●
Fornt Door Interlock ● ● ● ● ● Operation Memo ● ● ● ● ●
Chuck Hydraulic Pressure Maintenance Interlock ☆ ☆ ☆ ☆ ☆ ETC
ETC Tool Box ● ● ● ● ●
Tool Box ● ● ● ● ● Customized Color Need Munsel No. ☆ ☆ ☆ ☆ ☆
Customized Color Need Munsel No. ☆ ☆ ☆ ☆ ☆ CAD & CAM ☆ ☆ ☆ ☆ ☆
CAD & CAM ☆ ☆ ☆ ☆ ☆
❖ Thermal Displacement Compensation device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
SE2200C Series Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Spindle LC LMC LMSC Electric Device LC LMC LMSC
Main Sp. Hollow Chuck 3 Jaw 10″ ● ● ● 1Color : ■ ● ● ●
Main Sp. Solid Chuck 3 Jaw 10″ ○ ○ ○ Call Light 2Color : ■■ ○ ○ ○
Sub Sp. Hollow Chuck 3 Jaw 5″ - - ● 3Color : ■■■ ○ ○ ○
Sub Sp. Solid Chuck 3 Jaw 5″ - - ○ Call Light & Buzzer 3Color : ■■■B ○ ○ ○
Standard Soft Jaw (1set) ● ● ● Electric Cabinet Light ○ ○ ○
Chuck Clamp Foot Switch ● ● ● Remote MPG ○ ○ ○
2 Steps Hyd, Pressure Device ○ ○ ○ Work Counter Digital ○ ○ ○
Spindle Inside Stopper ☆ ☆ ☆ Total Counter Digital ○ ○ ○
Main Spindle Cs-axis (0.001°) - ● ● Tool Counter Digital ○ ○ ○
Sub Spindle Cs-axis (0.001°) - - ● 6ea ○ ○ ○
Multi Tool Counter
Chuck Open/Close Confirmation Device ● ● ● 9ea ○ ○ ○
2 Steps Chuck Foot Switch ○ ○ ○ Electric Circuit Breaker ○ ○ ○
Sub Chuck Foot Switch - - ● AVR (Auto Voltage Regulator) ☆ ☆ ☆
Turret 25kVA ○ ○ -
Transformer
Tool Holder ● ● ● 30kVA - - ○
Mill Turret BMT - ● ● Auto Power Off ○ ○ ○
Straight Milling Head (Axial) Collet Type, 2ea - ● ● Measurement
Angular Milling Head (Radial) Collet Type, 2ea - ● ● Q-Setter ○ ○ ○
Straight Milling Head (Axial) Adapter Type - ○ ○ Automatic Q-Setter ○ ○ ○
Angular Milling Head (Radial) Adapter Type - ○ ○ Work Close Confirmation Device TACO ○ ○ ○
Boring Sleeve (U-drill Holder/Sleeve : Public Use) ● ● ● (Only for Special Chuck) SMC ○ ○ ○
Drill Socket ○ ○ ○ Work Setter ☆ ☆ ☆
U-Drill Cap ● ● ● X axis ○ ○ ○
Linear Scale
Angle Head ● ● ● Z axis ○ ○ ○
Angle Head - ☆ ☆ Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆ ☆
Tail Stock & Steady Rest Environment
Hydraulic NC Tail Stock (Std. Live Center) ● ● - FANUC ○ ○ ○
Air Conditioner
High Precesion Live Center ☆ ☆ - iTROL ○ ○ ●
Tail Stock Foot Switch ○ ○ - Dehumidifier ○ ○ ○
Coolant & Air Blow Oil Mist Collector ☆ ☆ ☆
Standard Coolant (Nozzle) ● ● ● Oil Skimmer (Only for Chip Conveyor) ○ ○ ○
Chuck Coolant (Upper Chuck) ○ ○ ○ MQL (Minimal Quantity Lubrication) ☆ ☆ ☆
Gun Coolant ○ ○ ○ Fixture & Automation
Through Spindle Coolant (Only for Special Chuck) ☆ ☆ ☆ Auto Door High-speed ○ ○ ○
Chuck Air Blow (Upper Chuck) ○ ○ ○ Auto Shutter (Only for Automatic System) ○ ○ ○
Sub Chuck Air Blow - - ○ Sub Operation Pannel ☆ ☆ ☆
Turnmill Through Coolant - ○ ○ Bar Feeder Interface ○ ○ ○
Tail Stock Air Blow (Upper Tail Stock) ○ ○ - Bar Feeder (FEDEK) ☆ ☆ ☆
Turret Air Blow ☆ ☆ ☆ Extra M-Code 4ea ○ ○ ○
Air Gun ○ ○ ○ Automation Interface ☆ ☆ ☆
Through Spindle Air Blow (Only for Special Chuck) - - - 16 Contact ○ ○ ○
I/O Extension (IN & OUT)
0.5Bar ● ● ● 32 Contact ○ ○ ○
6Bar ○ ○ ○ Main SP. ○ ○ ○
High Pressure Coolant Parts Catcher
20Bar ○ ○ ○ Sub SP. - - ○
70Bar ○ ○ ○ Sub Spindle Work Pusher (Spring Type) - - ○
Power Coolant System (For Automation) ☆ ☆ ☆ Sub Spindle Work Ejector (Pneumatic Type) - - ○
Coolant Chiller Turret Work Pusher (For Automation) ☆ ☆ ☆
- - -
(When Selecting Sub Tank Type, Chip Conveyor) Parts Conveyor (Required Main Parts Catcher) ○ ○ ○
Chip Disposal Semi Automation System ☆ ☆ ☆
Front(150ℓ[39.6 gal]) - - - Hyd. Device
Coolant Tank Front(200ℓ[52.8 gal]) ● ● ● Standard Hyd. Cylinder Hollow ● ● ●
Rear(150ℓ[39.6 gal]) ○ ○ ○ Standard Hyd. Unit 15ℓ(4gal) ● ● -
Chip Conveyor Front (Right) ○ ○ ○ {35bar (507.6 psi)} 20ℓ(5.3gal) - - ●
(Hinge/Scraper/Screw) Rear (Rear) ○ ○ ○ S/W
Special Chip Conveyor (Drum Filter) - - - SmartGuide-i ● ● ●
Conversational program
Standard HW-DPRO ○ ○ ○
○ ○ ○
(180ℓ[47.5 gal]) Thermal Displacement Compensation (HW-TDC) ○ ○ ○
Swing Tool Monitoring (HW-TM) ○ ○ ○
○ ○ ○
Chip Wagon (200ℓ[52.8 gal]) Machine Guidance (HW-MCG) ● ● ●
Large Size Energy Saving System (HW-ESS) ● ● ●
○ ○ ○
(330ℓ[87.2 gal]) DNC software (HW-eDNC) ○ ○ ○
Customized ☆ ☆ ☆ Machine Monitoring System (HW-MMS) ○ ○ ○
Safety Device Thermal Displacement Compensation Device ○ ○ ○
Total Splash Guard ● ● ● Premium Tool Operation ● ● ●
Back Spin Torque Limiter (BST) ● ● ● Manual Viewer ● ● ●
Torque Limiter ○ ○ ○ Scheduling ● ● ●
Fornt Door Interlock ● ● ● Operation Memo ● ● ●
Chuck Hydraulic Pressure Maintenance Interlock ☆ ☆ ☆
ETC
Tool Box ● ● ●
Customized Color Need Munsel No. ☆ ☆ ☆
CAD & CAM ☆ ☆ ☆
❖ Thermal Displacement Compensation device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
Specifications are subject to change without notice for improvement.
SPECIFICATIONS
MACHINE TOOL
HYUNDAI WIA FANUC - SMART PLUS Spindle Output/Torque Diagram
HYUNDAI WIA
SE2200A Series 6,000 rpm SE2200 Series 4,500 rpm
Power (kW) [HP] Torque (N.m) Power (kW) [HP] Torque (N.m)
SE Series
Spindle Speed (r/min) Spindle Speed (r/min)
EXPERIENCE
THE NEW TECHNOLOGY
11
11kW [15HP] (S2 60min, S1 Cont.) [7.4] 46.7N·m (S2 15min) 46.7
[15] 161N·m (S2 60min) 161
3.7 3.7kW [5HP] (S2 60min, S1 Cont.)
120N·m (S1 Cont.) [5] 31.4N·m (S2 60min) 31.4
120
Torque
23.6N·m (S1 Cont.) 23.6
Power
Torque
Power
1,500
0
0 652 870 1,087 1,522 3,500 1,125 3,375 6,000
Spindle Speed (r/min) Spindle Speed (r/min)
2.75
2.75kW [3.69HP] (S2 15min)
[3.69]
26.2N·m (S2 15min) 26.2
Torque
Power
1,333
0 1,000 3,000 6,000
Spindle Speed (r/min)
SPECIFICATIONS
13.5 13.5kW [18HP] (S6 40%) 13.5 13.5kW [18HP] (S6 40%)
[18] [18] 150.3N·m (S6 40%) 150.3
114.5N·m (S6 40%) 9kW [12HP] (S1 Cont.) 114.5 9kW [12HP] (S1 Cont.)
9 9
[12] [12] 100N·m (S1 Cont.)
100
76.4N·m (S1 Cont.) 76.4
Torque Torque
Power Power
9
9kW [12HP] (S1 Cont.) 31.1N·m (S1 Cont.) 31.1
[12]
4.9
4.9kW [6.6HP] (S1 Cont.)
[6.6]
Torque Torque
Power Power
Torque
Power
MACHINE TOOL
External Dimensions
HYUNDAI WIA
C2
1610 (63.4) unit : mm(in)
EXPERIENCE
THE NEW TECHNOLOGY
Chip Discharge Height
990 (39)
Length “L” C1
410 (16.1)
SE2200A/LA
SE2200/L
)
(Ø 211
uck
(Ø2
3)
Ø5 .5)
8.
Ø
)
″Ch
2
71
ck
)
3.8 ia.
hu
Ø1 ng D
5 (6
(
″C
(2.7)
50 tti
68
(8
Ø3 x cu
Ø17
10
Ma 6)
23.
Ø2
6 0 0 (Ø ing
Ø . Sw
185 (7.3)
x
Ma
10
(0.4)
Ø1 .6)
(Ø6
68
U-DRILL
28
(1.
1) 25
(1)
1
.3)
.6)
Ø16
Ø40
(Ø6
(Ø1
3)
Ø5 .5)
8.
Ø
2
71
) )
ck 3.8 ia.
u ( Ø1 ng D
ch
(2.7)
0″ 50 tti
68
(1 Ø3 x cu )
54 Ma 3.6
(Ø2 g
2 0 0
Ø Ø6 . Swi n
185 (7.3)
x
Ma
25 (1)
10
(0.4)
Ø1 .6)
50
(Ø6
Ø2
68
U-DRILL
28
(1.
1) 25
(1)
.6)
1
.3)
Ø40
Ø16
(Ø1
(Ø6
MACHINE TOOL
Interference
HYUNDAI WIA
unit : mm(in)
395 (15.6)
SE2200MA/LMA
SE2200M/LM
Ø 8)
20
( Ø 55
(Ø
SE2200LMC
)
4
10
Ø2
)
uck
Ø
19
k)
)
″Ch
0
uc
ck
(Ø
hu )
Ch
Ø
1.8 ia.
7.
5 (6
2 c
21 .3)
Ø3 .3) 0″ Ø1 D
5)
(Ø
(8 ″
Ø5 0 ( tting
0
(1
8
Ø17
3 0
10
(Ø 0 (Ø
(Ø 55
4 Ø3 x cu
25 .6)
)
20
Ø2
10
Ø2
.9) Ø Ma 0 (Ø23
Ø60 . Swing
Ø1 Max
(Ø7 90
(0.8)
20
.5)
3
Ø1 )
.5
50
90 (2)
Ø1 .5)
SE Series
(Ø7 Ø25
5
(Ø10
)
55
Ø2 0)
1
(Ø
05 150 (5.9) 65 30 150 (5.9) 60
Ø2 .1) 22
8 (2.6)(1.2) (2.4)
(Ø +
65 300 (11.8) 95 210 (8.3)
23
(2.6) (3.7) X-St.
EXPERIENCE
THE NEW TECHNOLOGY
SE2200LMSA
Ø2 IN
395 (15.6)
MA
13
SE2200LMS
B .5)
(Ø
Ø1
SU 90 (Ø
SU (Ø7
8
SE2200LMSC 1)
.4)
B 7. 5.
90
5) (Ø
k)
Ø1
Ø2 30 AIN
huc
Ø1 M
k)
(Ø 55 k)
uc
10
(6″C
uc
Ch
) h .8) ia.
Ø2 ″c 11
(Ø ing D
(8″
0
(Ø 13
5
(1 0
Ø17
0 tt
10
8.4 4 Ø3 x cu
) 25 .6)
Ø2
Ø Ma 0 (Ø23
Ø . Sw g
6 0 i n
Max
(0.8)
20
Ø13
5)
5
Ø25 ) (Ø0.
(Ø1 0
)
20.9
1 (Ø
Ø53
6 50
Ø22 9) (2)
.
Ø25
(Ø8
(Ø10
5
(Ø1.3)
Ø32
)
(Ø1 5
B)
0)
5
Ø2
SU
30(
(2.6)(1.2) (2.4)
300 (11.8) 95 210 (8.3)
(3.7) X-St.
SPECIFICATIONS
Facing Holder
U-Drill Outside
Boring Bar
Boring Bar Boring Bar Extension Grooving
Socket
Holder OD Holder
12 Stations
Drill Threading
U-Drill Cap Pice
Clamper 6 5
Facing Holder 1 1
Standard - -
Straight Mill Holder
TTC - -
Driven Holder
Standard - -
Angular Mill Holder
TTC - -
Ø10 (Ø3/8″) 1 1
Ø12 (Ø1/2″) 1 1
Ø16 (Ø5/8″) 1 1
Boring
Ø20 (Ø3/4″) 1 1
Socket
Ø25 (Ø1″) 1 1
MT 1 Opt. Opt.
Drill
MT 2 Opt. Opt.
ER Collet - -
MACHINE TOOL
Tooling System
HYUNDAI WIA
unit : mm(in)
Milling Collet
ER20 Straight Mill
Holder
SE Series
Drill O.D Holder O.D Tool
24P. INDEX
& OPTION
EXPERIENCE
THE NEW TECHNOLOGY
12 Stations [24 Stations] 12 Stations [24 Stations]
Right/Left 3 2 2 -
Double - - 1 1
O.D Holder
Double (24P, Main) - 1 - 1
Turning Holder
Double (24P, Sub) - - - 1
Facing Holder 1 1 1 1
Cutting Holder 1 1 1 1
Single 2 1 1 -
I.D Holder Double - - 1 1
Boring Holder
Triple - 1 - 1
U-Drill Holder Cap 1 1 1 1
Straight Mill Holder Standard 2 2 2 2
Driven Holder
Angular Mill Holder Standard 2 2 2 2
Ø10 (Ø3/8″) 1 1 1 1
Ø12 (Ø1/2″) 1 1 1 1
Boring Ø16 (Ø5/8″) 1 1 1 1
Ø20 (Ø3/4″) 1 1 1 1
Ø25 (Ø1″) 1 1 1 1
Ø8 (5/16″) - 1 1 1
Socket
Ø10 (Ø3/8″) - 1 1 1
Sub Boring
Ø12 (1/2″) - 1 1 1
Ø16 (5/8″) - 1 1 1
MT 1 Opt. Opt. Opt. Opt.
Drill
MT 2 Opt. Opt. Opt. Opt.
ER Collet 1 Set 1 Set 1 Set 1 Set
Adapter Set Opt. Opt. Opt. Opt.
SE2200/A/LA/L/LC
Tooling Travel Range (SE2200A/LA | SE2200/L/LC) unit : mm(in)
185 (7.3)
185 (7.3)
340 (13.4)/560 (22) Z-STROKE 7 340 (13.4)/560 (22) Z-STROKE 35 5 (0.2)
B A Max. Turning Length (0.3) (1.4)
(1.4)
(0.3) (2.1)
35
7 53
C
75
X-STROKE
190 (7.5)
210 (8.3)
165 (6.5)
(3)
X-STROKE
210 (8.3)
(1.8)
45
(0.8)
20
B C
0 32.5
0 32.5
33 39 360 (14.2)/580 (22.8) 102.9 360 (14.2)/580 (22.8) 102.9
2 39 TAIL/S STROKE) (4.1) TAIL/S STROKE) (4.1)
11 43
185 (7.3)
340 (13.4)/560 (22) Z-STROKE 5 (0.2) 5
(0.2)
340 (13.4)/560 (22) Z-STROKE 7
(2.7)
(1.4) (2.9)
68
35 73
(0.3)
75 (3)
157 (6.2)
X-STROKE
117 (4.6)
210 (8.3)
X-STROKE
210 (8.3)
(2.1)
53
(3.7)
93
ITEM A B C
SE2200A 340 (13.4)
- 32.5 (1.3)
SE2200LA 560 (22)
SE2200 307 (12.1) 33 (1.3)
39 (1.5)
SE2200L 558 (22) 2 (0.08)
SE2200LC 549 (21.6) 11 (0.43) 43 (1.7)
SPECIFICATIONS
SE2200M/LM
MACHINE TOOL
Tooling Travel Range (SE2200MA/LMA | SE2200M/LM/LMC)
HYUNDAI WIA
unit : mm(in)
75 (3) 75 (3)
(5.9)
16.5 (5.9)
150
(1.4) 150
5 (0.2)
34.5
340 (13.4)/560 (22) Z-STROKE
(0.6)
125 (4.9)
(1.2)(2.6)
30 65
B A Max. Turning Length
210 (X-STROKE)
(2)
50
C
210 (X-STROKE)
194
150
60
16
SE Series
LM 508 52 39
MC 499 61 43
75 (3) 75 (3)
I.D Tool Angular Driven
150 (5.9)
32.3 (1.3)
(5.9)
150
340 (13.4)/560 (22) Z-STROKE 15 26
340 (13.4)/560 (22) Z-STROKE
(0.6) +
27
(2.6)
50
65
28 65
(2)
210 (X-STROKE)
210 (X-STROKE)
EXPERIENCE
THE NEW TECHNOLOGY
180
180
30
30
75 (3)
Face Tool
150 (5.9)
112 (4.4) 13
(0.5)
ITEM A B C
180
75 (3)
(5.9)
150
5
560 (22) Z-STROKE (0.2)
125 (4.9)
B A Max. Turning Length
(1.2)(2.6)
30 65
C
6 (0.2) 256 (10.1)
X-STROKE
194 (7.6)
(0.5)
12.5
210 (8.3)
150 (5.9)
X-STROKE
210 (8.3)
(4.2)
107
(3.1)
80
Ø135
Ø110
(4.3)
(5″)
(2.4)
(2.1)
60
(0.6)
54
16
26 56 (2.2)
5 D ZB-STROKE (1) 82 4(0.2) 5 D ZB
(0.2) (3.2) (0.2)
75 (3)
A B C
I.D Tool Angular driven
529 31 32.5 560 (22) Z-STROKE 15 150
(0.6) 560 (22) Z-STRO
508 52 39
499 61 43
12.5 28 65
(0.5) (1.1)
180 (7.1)
X-STROKE
X-STROKE
210 (8.3)
210 (8.3)
(4.2)
107
(3.1)
80
Ø135
Ø110
(4.3)
(5″)
(1.2)
(1.2)
30
30
(2.1)
54
26 56 (2.2)
5 D ZB-STROKE (1) 82 4(0.2) 5 D ZB
(0.2) (3.2) (0.2)
75 (3)
180 (7.1)
180 (7.1)
X-STROKE
X-STROKE
210 (8.3)
210 (8.3)
(0.5)
(4.2)
107
(3.1)
80
Ø135
Ø110
(4.3)
(5″)
(1.2)
30
30
(2.1)
54
26 56 (2.2)
5 D ZB-STROKE (1) 82 4(0.2) 5 D ZB
(0.2) (3.2) (0.2)
ITEM A B C D
SE2200LMSA 529 (20.8) 31 (1.2) 32.5 (1.3) 599.3 (23.6)
SE2200LMS 508 (20) 52 (2) 39 (1.5) 560 (22)
SE2200LMSC 499 (19.6) 61 (2.4) 43 (1.7) 547 (21.5)
SPECIFICATIONS
MACHINE TOOL
Tooling Travel Range (SE2200LMSA/LMS/LMSC)
HYUNDAI WIA
unit : mm(in)
75 (3) 75 (3)
34.5 (1.4)
560 (22) Z-STROKE
(5.9)
150
16.5 (0.6)
125 (4.9)
(1.2)(2.6)
30 65
(0.5) (2)
12.5 50
6 (0.2) 256 (10.1) 6 (0.2) 256 (10.1)
X-STROKE
194 (7.6)
(0.5)
12.5
210 (8.3)
(4.2)
(4.2)
107
107
(3.1)
(3.1)
80
80
Ø135
Ø135
Ø110
Ø110
(4.3)
(4.3)
(5″)
(5″)
(2.1)
(2.1)
(0.6)
54
54
16
26 56 (2.2) 26 56 (2.2)
(1) (1)
75 (3) 75 (3)
SE Series
Angular driven
150
15 150
(0.6) 560 (22) Z-STROKE 32.3
(1.3)
50
12.5 28 65
65
28
(0.5) (1.1)
(0.5)
12.5
210 (8.3)
(4.2)
(4.2)
107
107
(3.1)
(3.1)
EXPERIENCE
THE NEW TECHNOLOGY
80
80
Ø135
Ø135
Ø110
Ø110
(4.3)
(4.3)
(5″)
(5″)
(1.2)
30
(2.1)
(2.1)
54
54
26 56 (2.2) 26 56 (2.2)
(1) 82 4(0.2) 5 D ZB-STROKE (1) 82 4(0.2)
(3.2) (0.2) (3.2)
75 (3) 75 (3)
150
45
(0.5) (0.2)(2.4)
12.5 5 60
65
(0.5)
12.5
210 (8.3)
(0.5)
(4.2)
(4.2)
107
107
(3.1)
(3.1)
80
80
Ø135
Ø135
Ø110
Ø110
(4.3)
(4.3)
(5″)
(5″)
(1.2)
30
(2.1)
(2.1)
54
54
26 56 (2.2) 26 56 (2.2)
(1) 82 4(0.2) 5 D ZB-STROKE (1) 82 4(0.2)
(3.2) (0.2) (3.2)
ITEM A B C D
SE2200LMSA 529 (20.8) 31 (1.2) 32.5 (1.3) 599.3 (23.6)
SE2200LMS 508 (20) 52 (2) 39 (1.5) 560 (22)
SE2200LMSC 499 (19.6) 61 (2.4) 43 (1.7) 547 (21.5)
SPECIFICATIONS
Specifications [ ] : Option
MACHINE TOOL
Specifications
HYUNDAI WIA
[ ] : Option
SE Series
N・m
Max. Torque
Sub N・m - 63.6 [47]
Main - A2-6
Spindle Nose
Sub mm - FLAT TYPE
Main - BELT
Spindle Type 30
Sub - - BELT +
C-axis Indexing deg - 0.001˚ 31
210/340 210/560 210/340
X/Y mm(in) 210/560 (8.3″/22″)
Travel (8.3″/13.4″) (8.3″/22″) (8.3″/13.4″)
EXPERIENCE
THE NEW TECHNOLOGY
Z/ZB mm(in) - 560 (22″)
FEED X/Y m/min(ipm) 30/36 (1,181/1,417)
Rapid Traverse Rate
Z/ZB m/min(ipm) - 15 (591)
Slide Type - ROLLER LM GUIDE
No. of Tools ea 12 12 [24]
TURRET Tool Size O.D/I.D mm(in) □25/Ø40 (□1″/Ø1 1/2″) □20/Ø32 (□3/4″/Ø1 1/4″)
Indexing Time sec/step 0.15
Milling Tool Speed (rpm) r/min - 6,000
Motor (Max./Cont.) kW(HP) - 2.75/1.85 (3.69/2.48) [Cont. : 2.8 (3.8)]
LIVE TOOL Max. Torque N・m - 26.2 [Cont. : 27]
Collet Size mm(in) - ER20 / Ø13 (Ø0.5″)
Type - - BMT45
Taper - MT#4 -
TAIL
Quill Dia. mm(in) Ø56 (Ø2.2″) -
STOCK
Travel mm(in) 360 (14.2″) 580 (22.8″) 360 (14.2″) 580 (22.8″) -
TANK Coolant Tank ℓ(gal) 150 (39.6) 200 (52.8) 150 (39.6) 200 (52.8)
CAPACITY Lubricating Tank ℓ(gal) 0.7 (0.18)
Electric Power Supply kVA 18 23
POWER
Thickness of Power Cable Sq Over 16
SUPPLY
Voltage V/Hz 220V, 50/60Hz
2,190×1,610 2,970×1,610 2,220×1,610 2,970×1,610
Floor Space (L×W) mm(in)
(86.2″×63.4″) (116.9″×63.4″) (87.4″×63.4″) (116.9″×63.4″)
MACHINE Height mm(in) 1,700 (66.9″)
Weight kg(lb) 3,200 (7,055) 3,600 (7,937) 3,250 (7,165) 3,650 (8,047) 3,750 (8,267)
CNC Controller - HYUNDAI WIA FANUC - SMART PLUS [HYUNDAI-iTROL]
Specifications [ ] : Option
MACHINE TOOL
HYUNDAI WIA FANUC i Series - Smart Plus
HYUNDAI WIA
[ ] : Option
Controlled axis / Display / Accuracy Compensation Program input
2 axes (X, Z) / 3 axes (X, Z, C) / 4 axes (X,Z,Y,C) Multiple repetitive cycles Ⅰ, Ⅱ
Control axes 5 axes (X, Z, B, C, A) / 6 axes (X, Z, Y, B, C, A) Canned cycle for turning
7 axes (X1/Z1, X2/Z2, B2, C1/C2) Auxiliary function / Spindle speed function
Simultaneously controlled axes 2 axes [Max. 4 axes] Auxiliary function M & 4 digit
Designation of spindle axes 3 axes [Max. 4 axes] Level-up M Code High speed / Multi / Bypass M code
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Spindle speed function S & 5 digit , Binary output
Least setting Unit
C, A axes : 0.001 deg Spindle override 0% ~ 150% (10% Unit)
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Multi position spindle orientation M19 (S##)
Least input increment
C, A axes : 0.001 deg FSSB Rigid tapping
Inch / Metric conversion G20 / G21 Constant surface speed control G96, G97
High response vector control Tool function / Tool compensation
Interlock All axes / Each axis Tool function T & 2 digit + Offset 2 digit
Machine lock All axes Tool life management
Backlash compensation ± 0~9999 pulses (exc.Rapid traverse / Cutting feed) Tool offset pairs 128 pairs
Position switch Tool nose radius compensation G40, G41, G42
LCD / MDI 15 inch LCD unit (with Touch Panel) Geometry / Wear compensation
Feedback Absolute motor feedback Direct input of offset measured B
Stored stroke check 1 Over travel Editing function
Stored stroke check 2, 3 Part program storage size 5,120m (2MB)
SE Series
DNC operation Needed DNC software / CF card Memory card program edit
Program restart Data input / output & Interface
Wrong operation prevention CF card, USB memory
I/O interface
Program check function Dry run Embedded Ethernet interface
Single block Screen hard copy
Search function Program Number / Sequence Number External message
Interpolation functions External key input 32
Nano interpolation External workpiece number search +
Positioning G00 Automatic data backup
33
Linear interpolation G01 Setting, display and diagnosis
Circular interpolation G02, G03 Self-diagnosis function
Exact stop mode Single : G09, Continuous : G61 History display & Operation Alarm & Operator message & Operation
EXPERIENCE
THE NEW TECHNOLOGY
Dwell G04, 0 ~ 9999.9999 sec Run hour / Parts count display
Skip G31 Maintenance information
1st reference : G28, 2nd reference : G30 Actual cutting feedrate display
Reference position return
Ref. position check : G27 Display of spindle speed / T code
Thread synchronous cutting G33 Graphic display
Thread cutting retract Operating monitor screen Spindle / Servo load etc.
Variable lead thread cutting Power consumption monitoring Spindle & Servo
Multi / Continuous threading Spindle / Servo setting screen
Feed function / Acc. & Dec. control Multi language display Support 24 languages
Rapid traverse Display language switching Selection of 5 optional Languages
Jog : 0~2,000 mm/min (79 ipm) LCD Screen Saver Screen saver
Manual feed
Manual handle : x1, x10, x100 pulses Unexpected disturbance torque BST (Back spin torque limit)
Reference position return Function for machine type
Cutting Feed command Direct input F code Cs contour control (C & A axes) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Feedrate override 0 ~ 200% (10% Unit) Polar coordinate interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Rapid traverse override 1%, F25%, 50%, 100% Cylindrical interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Override cancel Polygon turning (2 Spindles) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Feed per minute G98 Canned cycle for drilling Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Feed per revolution G99 Spindle orientation expansion MS, SY TTS, TTMS, TTSY
Look-ahead block 1 block Spindle synchronous control MS, SY TTS, TTMS, TTSY
Program input Torque control MS, SY TTS, TTMS, TTSY
Tape Code EIA / ISO Y axis offset Y, SY, TTSY
Optional block skip 1 ea Arbitrary angular control Y, SY, TTSY
Absolute / Incremental program G90 / G91 Composite / Superimposed control MS, SY, TTS, TTMS, TTSY
Program stop / end M00, M01 / M02, M30 Balance cutting TTS, TTMS, TTSY
Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch)
Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19 Option
Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59) Additional optional block skip 9 ea
Manual absolute Fixed ON Fast ethernet Needed option board
Programmable data input G10 Data server Needed option board
Sub program call 10 folds nested Protection of data at 8 levels
Custom macro #100 ~ #199, #500 ~ #999 Tool offset pairs 200 pairs
G code system A, B/C Helical interpolation
Programmable mirror image G51.1, G50.1 Optional block skip 40 ea, 200 ea (AICC Ⅱ)
G code preventing buffering G4.1
Direct drawing dimension program Including Chamfering / Corner R
Conversational Program SmartGuide-i
Vietnam
Branch Office
HYNDAI WIA
Machine America corp.
HYNDAI WIA
America R&D Center
MACHINE TOOL
HYUNDAI WIA
HEADQUARTER
Changwon Technical Center/R&D Center/Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea
(Zip Code : 51533) TEL : +82 55 280 9114 FAX : +82 55 282 9680
OVERSEAS OFFICES
SE Series
Europe R&D Center Russia, 197374, St. Petersburg, Torfyanaya doroga 7,
Alexander-Fleming-Ring 57, 65428 R sselsheim Germany Business center <Gulliver-2>, Office No. 825
TEL : +49-0-6142-9256-0
34
ASIA +
35
Beijing HYUNDAI WIA Beijing Branch Office
No.9, West of Shunxi South Road, Renhe Town, Shunyi District, Beijing, China 1401, Zhonghangji Plaza B, No. 15 Ronghua South Road, BDA Dist, Daxing Dist,
EXPERIENCE
THE NEW TECHNOLOGY
TEL : +86-10-6049-6373 Beijing, China, 100176
TEL : +86-10-8453-9850
AMERICA
HYUNDAI WIA Machine America corp. HYUNDAI WIA America R&D Center
450 Commerce Blvd, Carlstadt, NJ 07072, USA 39205 Country Club Drive Suite C-9, Farmington Hills, MI 48331, USA
TEL : +1-201-987-7298 TEL : +1-248-324-1057
With its top-quality HYUNDAI WIA machine tool creates a new and better world.