Professional Documents
Culture Documents
TB201802 Improvement To PEFS Brackets
TB201802 Improvement To PEFS Brackets
TB201802 Improvement To PEFS Brackets
1
2
Improvements:
1. Upright Angles:
a. Steel grade changed from standard structural grade to high strength structural
grade
b. Steel angle size increased from 40x40x5mm to 50x50x5mm
2. Brace Angles:
a. Steel grade changed from standard structural grade to high strength structural
grade
b. Steel angle size increased from 30x30x4mm to 40x40x4mm
Other Changes:
To accommodate the above improvements the size of the base plate increased slightly as per
below figure.
NO CHANGES have been made to any of the mounting hole locations. The improved
bracket can be used to replace an old bracket providing there is adequate clearance for
the base plate.