Professional Documents
Culture Documents
SECTION 11500 Medical Equipment - General Specifications Part 1 General
SECTION 11500 Medical Equipment - General Specifications Part 1 General
PART 1 GENERAL
Comply with all applicable requirements, standards and codes specified in FGI 2010
- Guidelines for Design and Construction of Health Care Facilities.
1.1 SUMMARY
1.2 PRE-REQUISITE
A. All items shall be new, of first quality, and conform to the drawings and
Specifications. Factory seconds will not be accepted. Installation shall
be as per the requirements of the Contract and as per manufacturer’s
manual/catalogues. All items are to be provided according to
Specifications. Each item must have a sticker identifying the
manufacturers. It must be fixed in an inconspicuous location.
C. Although such work is not specifically indicated, furnish and install all
supplementary or miscellaneous items, appurtenances and devices
incidental to or necessary for a sound, secure and complete
installation.
All items in the Bills of Quantities shall be read as being inclusive of all
other information contained in the Construction and Contract
Documents.
1.3 SUBMITTALS
B. Product Data and Shop Drawings: Submit three (3) copies of product
data including brochures, catalogues etc. for all medical items, shop
drawings and product data are to show all dimensions, construction
details, finishes and other pertinent information. Product data or shop
drawings are to be labelled with item code number, manufacturer
dimensions, and finishes.
1.4 QUALIFICATIONS
1.5 COORDINATION
3. Testing and Samples : The Contractor shall allow for the supply
of samples of all materials for the approval of the Engineer.
Initial samples, once approved, shall form the standard for
reviewing subsequent samples of materials taken at frequent
and regular intervals during the course of the work. Work and
materials from which samples are taken which, in the opinion of
the Engineer, fail to match the standard of the approved
samples shall be rejected.
B. The cost of providing such samples together with the cost of mailing or
transporting the samples to and from the Engineer shall be borne by
the Contractor.
1.7 PROCUREMENT
C. Prior to placing orders, the Contractor shall ensure that all, accessories
and fixings are being supplied from the Manufacturer or third party
source. In addition, the Contractor shall verify that items can fit through
doorways and elevators as necessary.
B. Do not deliver Medical Equipment until painting, wet work and similar
operations, which could damage, soil or deteriorate components have
been completed in storage or installations areas. If, due to unforeseen
circumstances, Medical Equipment must be stored in other than
installation areas, store only in areas, which meet the requirements
specified for installation areas. When material is stored off the job site,
provide adequate insurance to protect the Employer from all losses.
1.9 WARRANTIES
B. All items and their accessories will need to include two years of
manufacturers’ warranty and five years of additional warranty effective
date of commissioning and acceptance by client. All warranties should
include the following parameters:
1. Parts – all inclusive warranty for all parts that an item would
require to include shipping and handling charges.
2. Labor – all inclusive labor charges for moving, relocating,
returning, or fixing.
3. Upgrades – all upgrades released during the warranty period
whether that upgrade is software related or hardware related.
PART 2 PRODUCTS
2.2 MATERIALS
All Medical items noted will need to meet the following requirements:
PART 3 EXECUTION
3.1 PREPARATION
B. Coordinate the work with all other trades affected by the installation,
and pay particular attention to timely furnishing of supporting and
attachment accessories, utility connections etc.
The Contractor shall supply two copies of updated Project Record Books to
record the following items.
A. Test reports.
The Engineer must approve/accept the final inventory and update Project
Record Books prior to final acceptance.
3.4 MAINTENANCE
3.5 CLEANING
A. Upon completion of each day’s installation, remove all debris from the
building and from the job site created by work provided under this
Section, and leave all areas clean. No trash is to be left on site.
Dumpsters provided by others working on the project are not to be
used unless written authorization is given by the Engineer.
B. Upon completion of the installation, remove any soiled spots from the
face of the carpet or other finished surfaces using processes
recommended by the manufacturer, and in a manner acceptable to the
Engineer. Replace any areas of carpet or other finished surfaces where
cleaning has failed to restore appearance and quality.
END OF SECTION
Ministry of Health (MOH) III-2/11500/48 Medical Equipment -
New Al-Sabah Hospital General Specifications