Professional Documents
Culture Documents
FSW - PSW - TRC - Infinity Squared
FSW - PSW - TRC - Infinity Squared
uk/tag/fsw_psw-trc/
Search
01/16 ARCHIVES
Af ter some kind indiv idual decided to rip of f my driv er side wing mirror, I decided that rather than just repairing/replacing
the broken one like f or like, I would take the opportunity to upgrade the entire setup to power f old mirrors. Archives Select Month
CATEGORY
Cars
There are dif f erent ty pes of mirrors and mirror switches that BMW installed on these cars and the setup of any giv en car
Guides
depends on other things such as whether the car has electric memory seats, f or example .
CATEGORIES
TAGS This guide is concerned particularly with my own car which, f or ref erence, had f actory installed manual f old mirrors and Blog (41)
$313 memory seats. Whilst I uncov ered a lot of inf ormation about pre f acelif t cars, there are still some areas that are a Carputer (5)
61316901383
aktiv
my stery to me! Cars (18)
change job The underside of the mirror control switch is coloured depending on the conf iguration of the car. The main ones are
Misc (2)
code detailed below with part numbers:
coding NTG 2.5 Upgrade (2)
ecu
enable Black Manual Fold Non Memory
fa
RECENT COMMENTS
facelift
fold Purple Power Fold Memory Leonard on Changing BMW Vehicle Order
folding Using NCS Expert
folding mirrors
thomas on Changing BMW Vehicle Order
fsw_psw.man Yellow Power Fold Non Memory
Using NCS Expert
fsw_psw.trc
ftm Leonard on Changing BMW Vehicle Order
Since I had memory seats/mirrors already, I had a light blue backed switch installed. I just needed a pair of power f old Using NCS Expert
glass
gm5 mirrors and the purple backed switch (part number 61316901383, approx £54 f rom BMW). Pellumb on Changing BMW Vehicle Order
mirrors Using NCS Expert
module The M irrors abhishek soni on Android ScreenCast
ncs
ncs expert The mirrors come in two main ty pes – power f old and manual f old. The wiring on a pre f acelif t car is a bit more
nicht aktiv
complicated – the connectors are av ailable in dif f erent ty pes and the car itself has separate modules f or the driv er and
options
LINKS
power passenger mirror control. The retrof it at this stage could be more complicated if y our car is missing certain modules.
power fold Facebook
process ecu On a f acelif t v ehicle, like mine, BMW shif ted mirror control to the GM5 ECU module which eliminates the requirement f or LJC Photography (under dev)
purple
separate control modules. This also resulted in the mirrors changing their connector to a ribbon sty le one that is not YouTube Videos
read
ribbon backwards compatible with the old pre f acelif t mirrors.
SG_CODIEREN
vehicle order Hardware – M irror Frame s
vo
write Actually replacing the old mirrors with the new power f olding ones is f airly straight f orward.
zsc
1. On the inside of the door, remov e the plastic triangle cov ering the rear of the mirror base plate. You should be able to
see two bolts and the mirror cable running into the door.
3 comments
2. Pulling the top corner of the door card away f rom the door should pop out the top most retaining clip and if y ou hav e
small enough hands, y ou might just be lucky enough to be able to reach the connector clips and undo them. If not,
then y ou will need to remov e more of the door card (other bolts in the handle and f urther retaining clips need to be
popped out).
3. Undo the two retaining bolts holding the mirror to the door and the mirror should come f ree easily.
2. Disconnect the two heating element cables on the rear of the glass
3. Reinstall the glass in the new mirror unit by pushing it ev enly onto the clips behind – don’t f orget to reconnect the
1 de 4 02/09/2015 1:17
fsw_psw.trc | infinity squared http://www.infsq.co.uk/tag/fsw_psw-trc/
heating element!
2. Reinstall the cov ers on the new mirrors. Be caref ul with these too – replacements are around £35 each f rom BMW
and they come unpainted so y ou would need to hav e them spray ed to match y our car’s paint.
2. The single connecting cable plugs directly into the new purple switch and it slots into the same hole.
At this point, the mirror adjustment controls should work but the power f old will not. The car needs to be coded to f irst
inf orm the ECU that power f old mirrors are installed and secondly that the f eature should be enabled.
Read more
Share this:
1
01/16
When retrof itting options that were not f actory installed, it is sometimes necessary to program the car to enable them.
The car stores a list of options that were installed at the f actory in one or more of it’s ECUs. This is known as the Vehicle
CATEGORY
Cars Order (VO) and options such as electric auto f olding wing mirrors/side mirrors are part of an option pack that needs to be
Guides added to this list if they are to work correctly (or at all) af ter a retrof it.
The f ollowing is the process I used to add option $313 (Fold In Outside Mirror Package) to the VO on my Facelif t (2003
TAGS
on) E46 Coupe. It inv olv es the use of a BMW f actory tool called NCS Expert and a lot of the sof tware is unf ortunately in
aews
akmb German so is not particularly straightf orward to use f or non-German speakers! The process is essentially the same f or
bmcables most E46s but bear in mind that there may be some dif f erences in the modules that are av ailable in y our car.
bmw
chassis
What you ne e d:
code
coding
– Suitable BMW Diagnostic/Programming cable
coupe
diagnostics – A Laptop with Cable Driv ers and the NCS Expert tool Installed
e46 – The code f or the option y ou want to add to y our VO.
ecu
expert mode I got this f rom BMCables which included both the cable and sof tware. Other similar products are av ailable.
fa
facelift
For the sake of completeness I’v e uploaded a list of options here: VO_CODES. For this example with f olding mirrors, I
folding mirrors
fsw_psw.man used option S313A f rom the list which is translated to $313 when being used in NCS Expert.
fsw_psw.trc
gm5 WARNING: MAKE SURE Y OUR CAR AND LAPTOP BATTERY ARE IN GOOD HEALTH AND FULLY CHARGED (USE A
module
SECONDARY POWER SOURCE IF NECESSARY ). Y OUR CAR WILL SPEND A LOT OF TIME WITH THE KEY IN
ncs
ncs expert POSII AND WILL DRAIN THE BATTERY IF LEFT FOR EXTENDED PERIODS!
options
program M odifying the Ve hicle Orde r:
programming
retrofit 1. Connect the cable to the OBDII Port and start NCS Expert
vehicle order
vin 2. Turn the key in the ignition to POSII so that the instrument lights turn on and the car prov ides power to all modules
vo
write 3. Select File > Load Profile
zcs
4 comments
2 de 4 02/09/2015 1:17
fsw_psw.trc | infinity squared http://www.infsq.co.uk/tag/fsw_psw-trc/
If y ou don’t use an ‘expert’ prof ile, y ou will be prev ented f rom processing the ECU and perf orming write operations.
10. Select the Chassis f rom the box that pops up (again, I selected E46 here)
VO Selection List
Enter the option code (I entered $313 f or my f olding mirrors) in the attribute f ield and click Add, f ollowed by OK. You
can delete options by selecting one f rom the list and pressing the delete key on y our key board.
15. A box will appear that asks y ou to select an ECU module to process.
Select the same ECU module that y ou read initially.
19. Wait until the message on screen changes to Job Ended. The new VO has now been coded to the specif ied module.
3 de 4 02/09/2015 1:17
fsw_psw.trc | infinity squared http://www.infsq.co.uk/tag/fsw_psw-trc/
Coding VO Complete
20. The car operates a redundant sy stem f or the VO. You need to repeat the process described abov e to add the option
to the second ECU module that contains the VO list so they both match. In my case it was the AEWS module.
Once the option has been added to the VO, other coding f unctions can be adjusted to change f unctionality of the newly
installed item.
Share this:
1
4 de 4 02/09/2015 1:17