Professional Documents
Culture Documents
ME 22015 (Engineering Mechanics II) : Yangon Technological University Department of Mechanical Engineering
ME 22015 (Engineering Mechanics II) : Yangon Technological University Department of Mechanical Engineering
TUTORIAL (9)
09-08-2019 (Fri)
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
Classwork
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.66
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.75
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-75. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.86 The 0.75-kg bob of a pendulum is fired from rest at position A by a
spring which has a stiffness of k = 6 kN/m and is compressed 125 mm.
Determine the speed of the bob and the tension in the cord when the bob
is at positions B and C. Point B is located on the path where the radius
of curvature is still 0.6 m, i.e., just before the cord becomes horizontal.
SOLUTION
Datum at A:
TA + VA = TB + VB (Conservation of Energy)
1 2 1 2
0 + 2 6000 0.125 = 2
0.75 𝑣𝐵 + 0.75(9.81)(0.6)
2
10.64
𝑇𝐵 = 0.75
0.6
= 142 N Ans.
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-86. Continued
TA + VA = T𝐶 + VC
1 2 1 2
0 + 2 6000 0.125 = 0.75 𝑣𝐶 + 0.75(9.81)(1.8)
2
2
9.47
𝑇𝐶 + 0.75(9.81) = 0.75
1.8
𝑇𝐶 = 48.7 N Ans.
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.89
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-89. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.70
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-70. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.76
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-76. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-76. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.92
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-92. Continued
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14.97
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University
14-97. Continued
End of Chapter 14
09/08/2019 ©Aung Latt Zaw, Department of Mechanical Engineering, Yangon Technological University