Professional Documents
Culture Documents
A05 BEEE Project Report Template
A05 BEEE Project Report Template
A05 BEEE Project Report Template
Submitted by,
of
May 2024
KALASALINGAM ACDAEMY OF RESEARCH AND
EDUCATION
KRISHNANKOIL 626 126
Date:
KALASALINGAM ACDAEMY OF RESEARCH AND
EDUCATION
KRISHNANKOIL 626 126
BONAFIDE CERTIFICATE
Mr.S.Rajendran
Course Teacher
Assistant Professor
Department of Electrical and Electronics Engineering
Kalasalingam Academy of Research and Education
In a special way, we submit my grateful thanks to our parents who provided us all the
supports throughout the period of project development. We also render our deep thanks to our
friends and well-wishers who had been a source of encouragement throughout the period of
project development
ABSTRACT
Abstract of the report should be of one page (300 words) and shall include the purpose of
the study; the methodology used and a summary of the major findings, conclusions and
recommendations.
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
LIST OF TABLES
The list should use exactly the same captions as they appear above the tables in the text.
The list should be prepared with 1.5 line spacing.
LIST OF FIGURES
The list should use exactly the same captions as they appear below the figures in the text.
The list should be prepared with 1.5 line spacing.
TABLE OF CONTENTS
INTRODUCTION
Example:
1.1 GENERAL
1.2 ADSORPTION
< Font Style Times New Roman, size 12, Bold, Upper Case>
Sub Sections - Use only Arabic Numerals with two decimals. Sub section
numbering should be left justified using bold print.
Example:
< Font Style Times New Roman, size 12, Bold, Title case>
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
CHAPTER 2
COMPONENTS USED
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
CHAPTER 3
METHODOLOGY
Explain the methodology of your project with circuit diagram/block diagram. Also
attach step by step Picture of your project implementation process.
(Don’t copy circuit diagram from any source. Draw the circuit diagram by
your own using any software or manually and then attach in this chapter)
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
CHAPTER 4
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
CHAPTER 5
<<Times New roman font, 12 font size, justified and 1.15 line spacing>>
REFERENCES
3. Shin, K.G. and Mckay, N.D. (1984) ‘Open Loop Minimum Time Control of
Mechanical Manipulations and its Applications’, Proc. Amer. Contr. Conf.,
San Diego, CA, pp. 1231-1236.