Professional Documents
Culture Documents
08 Door Controls
08 Door Controls
Standards
BS8300 - Amendment 1
BS 8300 (amended) states “ the opening force, when measured at the leading edge of the door,
should be no more than 30N (Newtons) from 0 to 30 degrees (open) and no more than 22.5N
from 30 to 60 degrees of the opening cycle.” This replaces the previous guidance
contained in Approved Document M, which states a door opening force of “not more than 20N”.
As resistance created by air pressure, hinges, door seals and poor workmanship all affect the
opening force of the closing device BS 8000 and Approved Document M have both endorsed
the use of guidance relating to electromagnetic and power operated door controls which
conform to BS EN 1155.
Note: BS 8300 refers to the whole door set and not the door closer on its own.
George Boyd offers a door scheduling and door packing service to simplify and
accelerate the fitting of products when they are sent to site. We also have
key-cutting and master suite facilities at our sites around the country. Our
customers can be confident in George Boyd’s wealth of skills and expertise to
provide quality ironmongery and associated products - according to their
requirements.
INTRODUCTION
Door Controls
Controls to suit a host of different needs and applications.
The George Boyd range of door controls are suitable for residential, commercial and institutional applications and are offered in a
variety of types and finishes to suit a host of different needs and applications. As they control both the opening and closing of
doors, there are a variety of considerations that need to be taken into account when specifying.
Power Size
Dependent upon the door-mass and size (see table A), the power size can be varied on certain models to suit the door to which
the closer is fitted. This can be achieved in 2 ways:
FINISHES
CONTENTS
SSS Briton 2100 Series 3
Satin Stainless Steel
Briton Electromagnetic 4
PSS Briton 2500 Series 5
Polished Stainless Steel
Briton 1100 & 2003E 6
PBR
Polished Brass Dorma Range 7 - 11
Geze Range 12 - 14
George Boyd Fairways
Range 15
Geze Boxer Range 16
Dorma ITS96 & Floor
Pivot 17
Dorma Floor Spring
Range 18
Other Finishes Available:
Geze Floor Spring
Range 19
SES Silver Sprayed COLOUR Colour Coated
GES Gold Enamel PCP Polished Chrome Plate Hold Open Devices 20 - 25
SNP Satin Nickel Plate SCS Self Colour Steel
SAA Silver Anodised WHITE
SCP Satin Chrome Plated
2
M50390 Door controls:Layout 1 05/09/2007 09:46 Page 2
Finishes
Cover Type “S” SES PBR COLOUR* SSS PSS
2110 IRBA310S IRSC3102 IRSC3103 IRSC3106 IRSC3107
2120B IRBA320S IRSC3202 IRSC3203 IRSC3206 IRSC3207
2130B IRBA330S IRSC3302 IRSC3303 IRSC3306 IRSC3307
2130BD IRBA340S IRSC3402 IRSC3403 IRSC3406 IRSC3407
2110B.T IRBT330S IRST3302 IRST3303 IRST3306 IRST3307
Finishes
Cover Type “L” SES PBR COLOUR* SSS PSS
2110 IRBA310L IRBA310P IRLC3103 IRLC3106 IRLC3107
2120B IRBA320L IRLC3202 IRLC3203 IRLC3206 IRLC3207
2130B IRBA330L IRLC3302 IRLC3303 IRLC3306 IRLC3307
2130BD IRBA340L IRLC3402 IRLC3403 IRLC3406 IRLC3407
2110B.T IRBT330L IRLT3302 IRLT3303 IRLT3306 IRLT3307
Finishes
Cover Type “C” SES PBR COLOUR* SSS PSS
2130B HWBTN251 HWBTN5PB HWBTN5CC HWBTN5SS HWBTN5PS
2130BD HWBTN7SE HWBTN7PB HWBTN7CC HWBTN7SS HWBTN7PS
2130B.T HWBTN4TS HWBTN4TB HWBTN4TC HWBT4TSS HWBT4TPS
3
M50390 Door controls:Layout 1 05/09/2007 09:46 Page 3
Briton 2130B.TE
Briton 2130B.TE electromagnetic door closer.
. Designed to hold open during normal use and is connected to the building fire alarm
system. On sounding the fire alarm, or in the event of power failure, the electromagnet
is deactivated and releases the door closer mechanism which, in turn, closes the door
in the normal controlled manner to maintain the fire door status
. Designed to and fully compliant with EN 1155
. Satisfies the requirements of Building Regulations Approved Document M:2004
. Track mounted 24v DC solenoid with an effective and reliable holding force
. On board test switch simulates fire condition to check operation
. Fully adjustable hold open angle from 85 degrees to 110 degrees
. Adjustable power size 3-4
. Separate latch action/closing speed
. Non-handed
Finishes
Door Closer SES PBR COLOUR* SSS PSS
Cover “C” HWBTN071 HWBTN072 HWBTN073 HWBTN076 HWBTN077
Cover “S” IRBTE33S IRSTE332 IRSTE333 IRSTE336 IRSTE337
Cover “L” IRBTE33L IRLTE332 IRLTE333 IRLTE336 IRLTE337
Accessories for 2130B.TE * Please specify RAL colour when ordering
FSR Transformer/Rectifier
For use with fire/smoke check electromagnetic door control units where 24dc is not available for the continuous rating required. A socket is
provided to accept a plug in relay:
Finishes
Pull Side (All with matching arms except SE finish which has a black arm)
Push Side
Fig.61 SE SES PBR COLOUR* SSS PSS
Size 3 IRGB6720 IRGB6721 IRGB6722 IRGB6723 IRGB6724 IRGB6725
Size 4 IRGB6740 IRGB6741 IRGB6742 IRGB6743 IRGB6744 IRGB6745
Size 5 IRGB6760 IRGB6761 IRGB6762 IRGB6763 IRGB6764 IRGB6765
* Please specify RAL colour when ordering
Note: Also available for Fig.66 applications. * Please specify RAL colour when ordering
4
M50390 Door controls:Layout 1 05/09/2007 09:46 Page 4
* For the operation of the Briton 2500 Series unit a 3 wire - 5 amp power supply must be connected to the side of the
unit. The unit requires a 230/250v single phase 50/60Hz supply.
Finishes
Door Control
SAA
Pull Side
HWBTN082
Push Side
HWBTN081
Push Pads & Plates Push pads & plates (Price on application)
. A series of push pads & plates to operate the Briton 2500 Series unit
. Surface mounted
. Installed on either side of the door
. Satin Stainless Steel finish
. Supplied complete with black back box
Motion Sensor
Note: We are also able to offer Power Assisted Door Controls from other manufacturers including GEZE and DORMA
5
M50390 Door controls:Layout 1 05/09/2007 09:47 Page 5
Finishes
Trimplate & Matching Arms (sprayed) SES
1110 IRBA111S
1110.T IRBA111T
Product Features Product Refrerance
Closer Size Max Door SIze 1110 1110.T 1120B 1130B 1120.B IRBA112S
width - weight
1130.B IRBA113S
1 750mm - 20kg
2 850mm - 40kg • • •
3 950mm - 60kg • • • •
4 1100mm - 80kg • • •
5 1250mm - 100kg • Classic Cover & Matching Arm PSS SSS PBR
6 1400mm - 120kg •
Main Features 1110 1110.T 1120B 1130B
1110 IRB111PS IRB111SS IRB111PB
CE Marked • • • • 1110.T IRB111TP IRB111TS IRB111TB
Body Size small small medium large
Fixed power or adjustable adj. fixed adj. adj. 1120.B IRB112PS IRB112SS IRB111PB
Power adjustment method template n/a wind thru wind thru 1130.B IRB113PS IRB113SS IRB113PB
Angle of opening 180° 180° 180° 180°
Separate latch action / closing speed • • • •
Adjustable backcheck • •
Manual hold open option • • •
Non projecting slide arm varient •
Matching track and / or arm finish • • • • Specification Cover & Matching Arm PSS SSS PBR
Tri-pack applications 1, 66 & 61 • • •
Non handed for LH or RH applications 1110 IRB11PPS IRB11SSS IRB11PBS
• • • •
Trimplate with matching arms S/G S/G S/G S/G 1110.T IRB11TPS IRB11TSS IRB11TPB
Trimplate with black arms S S S S
Classic cover with matching arms PSS/SSS/PBS PSS/SSS/PBS PSS/SSS/PBS PSS/SSS/PBS 1120.B IRB12PSS IRB12SSS IRB12PBS
Specification cover with matching arms PSS/SSS/PBS PSS/SSS/PBS PSS/SSS/PBS PSS/SSS/PBS 1130.B IRB13PSS IRB13SSS IRB13PBS
Finishes
Door Closer SES PBR COLOUR* SCP PCP SSS PSS
2003E Size 3 HWBTN010 HWBTN062 HWBTN063 HWBTN064 HWBTN065 HWBTN3SS HWBTN067
2003TE Size 3 HWBTN091 HWBTN092 HWBTN093 HWBTN094 HWBTN095 HWBTN096 HWBTN097
6
M50390 Door controls:Layout 1 05/09/2007 09:47 Page 6
DORMA TS 99 FL
DORMA TS 99 FL Electro-hydraulic door closer .
. Free-swing function
. Release device
. Smoke detector (TS99 FLR only)
. Power supply Unit (TS99 FLR only)
. Smoke detection - scattered light principal, optical sensor (TS99 FLR)
. Adjustable latching speed
. Rack & pinion closer - not CAM action
. Successfully independently tested and CE Marked to BS EN1155
. CERTIFIRE Approved for Fire Doors - ITT120 MM/IMM240 (CF119)
Dimensions
Length: 371mmTS99/660mmTS99 FLR
Overall Depth: 52mm
Height: 71mm
Springth Strength: EN4
Maximum Door Width: 1100mm
Finishes
Door Closer TS 99 SES
TS99 FL Standard Installation GBCAC086
TS99 FL Frame Fix GBCAC087
TS99 FLR GBCAC088
Note: EMF Version
The EMF version of the illustrated products allows a fire door to be held open
electro-mechanically to provide free flow of traffic. However in the event of the fire alarm
sounding the magnet is released and the door closer will close the fire door securely.
Finishes
Door Closer SES PBR
TS73EMF Size 4 HWDMA510 HWDMA511
TS73EMF Size 5 HWDMA512 HWDMA513
TS73EMF Size 6 HWDMA514 HWDMA515
7
M50390 Door controls:Layout 1 05/09/2007 09:47 Page 7
DORMA TS 93
DORMA TS 93 cam action door closer .
. CE marked
. Successfully independently tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240
. For additional BS8300/ADM compliance: This door closer when adjusted at size EN3 will
produce an opening force of 30N or less when fitted to doors 767mm wide or above.
. Adjustable sweep speed . “Thinking backcheck”
. Adjustable latching speed . Adjustable delayed action
Dimensions
Length: 275mm
Overall Depth: 53mm
Height: 60mm
Springth Strength: EN2-5 (Adjustable)
Maximum Door Width: 1250mm Finishes
Door Closer TS93 SES COLOUR* SSS PCP PBR
B Pull Side (CONTUR Design) GBCAC054 GBCAC055 _ _ _
B Pull Side (full metal cover) GBCAC056 GBCAC057 GBCAC058 GBCAC059 GBCAC060
G Push Side (CONTUR Design) GBCAC061 GBCAC062 _ _ _
G Push Side (full metal cover) GBCAC063 GBCAC064 GBCAC065 GBCAC066 GBCAC067
DORMA TS 92
DORMA TS 92 cam action door closer.
. CE marked
. Successfully independently tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240
. For additional BS8300/ADM compliance: This door closer when adjusted at EN3 will
produce an opening force of 30N or less when fitted to doors 733mm wide or above
. Adjustable sweep speed
. Adjustable latching speed
Dimensions
Length: 281mm
Overall Depth: 47mm
Height: 65mm
Springth Strength: EN2-4 (Adjustable)
Maximum Door Width: 1100mm
Finishes
Door Closer TS92 SES COLOUR* SSS PCP PBR
B Pull Side (CONTUR Design) GBCAC026 GBCAC027 _ _ _
B Pull Side (full metal cover) GBCAC028 GBCAC029 GBCAC030 GBCAC031 GBCAC032
G Push Side (CONTUR Design) GBCAC033 GBCAC034 _ _ _
G Push Side (full metal cover) GBCAC035 GBCAC036 GBCAC037 GBCAC038 GBCAC039
Door Closer TS92 Finishes
EMF Version SES COLOUR* SSS PCP PBR
B Pull Side (CONTUR Design) GBCAC040 GBCAC041 _ _ _
B Pull Side (full metal cover) GBCAC042 GBCAC043 GBCAC044 GBCAC045 GBCAC046
G Push Side (CONTUR Design) GBCAC047 GBCAC048 _ _ _
G Push Side (full metal cover) GBCAC049 GBCAC050 GBCAC051 GBCAC052 GBCAC053
8
M50390 Door controls:Layout 1 05/09/2007 09:47 Page 8
DORMA TS91
DORMA TS 91 cam action door closer .
. CE marked
. Successfully independently tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240
. For additional BS8300/ADM compliance: This door closer, size EN3, will produce an
opening force of 30N or less when fitted to doors 926mm wide or above
. Adjustable sweep speed
. Adjustable latching speed
Dimensions
Length: 267mm
Overall Depth: 47mm
Height: 65mm
Springth Strength: EN3
Maximum Door Width: 950mm
Finishes
Door Closer TS91 SES COLOUR* SSS PCP PBR
B Pull Side (with end caps) GBCAC012 GBCAC013 _ _ _
B Pull Side (full metal cover) GBCAC014 GBCAC015 GBCAC016 GBCAC017 GBCAC018
DORMA TS 90 Impulse
DORMA TS 90 cam action door closer.
. CE marked
. Successfully independently tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240
. For additional BS8300/ADM compliance: This door closer, size EN3, will produce an
opening force of 30N or less when fitted to doors 926mm wide or above
. Adjustable sweep speed
. Adjustable latching speed
Dimensions
Length: 246mm
Overall Depth: 46mm
Height: 57mm
Springth Strength: EN3
Maximum Door Width: 950mm
Finishes
Door Closer SES WHITE
TS90 GBCAC010 GBCAC011
9
M50390 Door controls:Layout 1 05/09/2007 09:48 Page 9
DORMA TS 97
DORMA TS 97 cam action door closer .
. CE marked
. Successfully independently tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240
. For additional BS8300/ADM compliance: This door closer, size EN3, will produce an
opening force of 30N or less when fitted to doors 783mm wide or above
. Adjustable sweep speed
. Adjustable latching speed
Dimensions
Length: 340mm
Overall Depth: 37mm
Height: 49mm
Springth Strength: EN2-4
Maximum Door Width: 1100mm
Finishes
Door Closer TS 97 SES COLOUR* SSS PBR
B Pull Side GBCAC082 GBCAC083 GBCAC084 GBCAC085
. CE marked
. TS83 dimensions 245 x 60 x 46mm
. Successfully independently type tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240 (CF118)
. Adjustable power EN 2-5
. Valve adjustable thinking backcheck as standard
. Optional valve adjustable delayed action, closing force and latching speed as standard
. Optional mechanical hold-open arm - switchable
Finishes
Door Closer SES PBR COLOUR* PCP SSS
TS83 Size 2-6 HWDMA585 HWDMA655 HWDMA661 HWDMA581 HWDMA580
10
M50390 Door controls:Layout 1 05/09/2007 09:48 Page 10
. CE marked
. TS73V dimensions 225 x 60 x 40mm
. Successfully independently type tested to BS EN 1154
. CERTIFIRE approved for fire doors - ITT 120 MM/IMM240 (CF117)
. Adjustable power EN 2-4
. ‘Thinking’ adjustable backcheck as standard
. Valve adjustable closing force & latching speed
. Options include; mechanical hold open arm, electromagnetic hold open
version (TS73 EMF) See page 7
Finishes
Door Closer SES PBR SSS PCP
TS73V Size 2-4 HWDMA550 HWDMA551 HWDMA552 HWDMA553
DORMA TS71/72 Door Closer DORMA TS71/TS72 Overhead door closer with matching arm.
. CE marked
. TS71 dimensions 232 x 68 x 45mm
. TS72VBC dimensions 232 x 68 x 45mm
. Successfully independently type tested to BS EN 1154
. CERTIFIRE approved for fire doors -ITT 120, IMM/MM 240 (CF268)
. Adjustable power (TS72VBC EN 2-4), (TS71 EN 3/4)
. Valve adjustable closing and latching speed as standard
. Valve adjustable ‘thinking’ backcheck as standard (TS72VBC only)
Finishes
Door Closer SES SSS PCP PBR
TS71 EN 3-4 HWDOTS71 _ _ _
TS72VBC EN 2-4 HWDOTS72 _ _ _
DORMA TS68 Closer DORMA TS68 overhead door closer with matching arm.
. CE marked
. TS68 dimensions 220 x 53.5 x 45mm
. Tested to BS 476 Part 22:1987 2 hour fire rated
. Successfully independently type tested to BS EN 1154
. Size selectable EN 2/3/4
. Adjustable sweep & Latching speed
. Selectable closing force
. Optional hold open arm available
. CERTIFIRE approved ITT120 (CF289)
Finishes
Door Closer SES
TS68 Size EN2/3/4 HWDMAS68
11
M50390 Door controls:Layout 1 05/09/2007 09:48 Page 11
Finishes
Door Closer SES PBR COLOUR SSS PSS
TS5000 Size 2-6 GZTS5001 GZTS5002 GZTS5003 GZTS5006 GZTS5007
TS5000E Size 2-6 GZTS5008 GZTS5011 GZTS5012 GZTS5010 GZTS5009
Finishes
Door Closer SES PBR COLOUR* SSS PSS
TS4000EFS Size 1-6 GZTS4021 GZTS4038 GZTS4039 GZTS4036 GZTS4037
TS4000E Size 1-6 GZTS4011 GZTS4012 GZTS4013 GZTS4016 GZTS4017
Finishes
Door Closer SES GES RPB COLOUR* SSS PSS
TS2000 Size 3-5 HWGZTS2S HWGZTS2G GZTS2002 GZTS2003 GZTS2006 GZTS2007
TS2000BC Size 3-5 GZTS2011 GZTS2014 GZTS2012 GZTS2013 GZTS2016 GZTS2017
Finishes
Door Closer SES GES PBR COLOUR* SSS PSS
TS1500 Size 3-4 HWGZTS5S HWGZTS5G GZTS1502 GZTS1503 GZTS1506 GZTS1507
13
M50390 Door controls:Layout 1 05/09/2007 09:49 Page 13
. GEZE TS3000B/BE dimensions - Body . Suitable for single action right and
260x50x40mm - Guide Rail 448.5x20.5x30.5mm left closing doors
. Adjustable power size EN2-4 . For leaf weight up to 130kg
. Adjustable Closing force . For leaf width up to 1100mm
. Adjustable closing speed . GEZE TS 3000 BE includes
. Adjustable hydraulic latching action electromechanical hold-open arm,
. Adjustable hydraulic back chack 24 V DC (release devices by others).
. Fire tested to EN 1634-1(CERTIFIRE CF 145) . Successfilly type tested to BS EN 1154
Finishes
SES COLOUR* SSS PSS
TS3000B GBCAC201 GBCAC204 GBCAC202 GBCAC203
TS3000BE GBCAC205 GBCAC208 GBCAC206 GBCAC207
* Please specify RAL colour when ordering
Finishes
SES SSS
TS1200 GBEDC010 GBEDC020
Finishes
Door Closer SES
TS430 Size 2 GZTS4302
TS430 Size 3 GZTS4303
TS430 Size 4 GZTS4304
14
M50390 Door controls:Layout 1 05/09/2007 09:50 Page 14
Finishes
SES PBR PCP SNP
Door Closer Packs Complete: HFABC004 HFABC001 HFABC003 HFABC002
(Matching Arm & Cover)
Arm Sets
Radius Covers
Finishes
SES PBR PCP SNP
Radius Covers (pictured) HFA2839S HFA2839B HFA2839C HFA2839N
15
M50390 Door controls:Layout 1 05/09/2007 09:50 Page 15
GEZE Boxer
Geze Boxer integrated door closer - power size 2 - 4 and 3 - 6
according to EN 1154 A.
. For Right & Left closing single action doors
. Closer fully integrated into door leaf
. Guide rail only visible when door is open
. Closing force, closing speed, hydraulic latching force & hydraulic back check
. Adjustable when installed
In case of using an integrated door closer the maximum possible door opening angle
amounts to 120 degrees
GEZE Boxer : Integrated door closer with screw accessories & installation
instructions Finishes
SES
GEZE Boxer size 2-4 GBIC0010
GEZE Boxer size 3-6 GBIC0010
Options include 4 & 8mm axle extensions
Please select one of the following options to complete your GEZE Boxer package:
STANDARD PACKAGE
Finishes
Single Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0014 GBIC0015 GBIC0016 GBIC0017
Double Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0022 GBIC0023 GBIC0024 GBIC0025
ELECTROMECHANICAL HOLD OPEN DEVICE PACKAGE(1)
Single Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0018 GBIC0019 GBIC0020 GBIC0021
Double Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0026 GBIC0027 GBIC0028 GBIC0029
MECHANICAL HOLD OPEN DEVICE PACKAGE(2)
Single Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0038 GBIC0039 GBIC0040 GBIC0041
Double Action SES SSS PSS COLOUR*
Guide Rail with Lever GBIC0042 GBIC0043 GBIC0044 GBIC0045
* Please specify RAL colour when ordering
ACCESSORIES
Boxer Double Action Pivot Set
Double Action Top Centre GBIC0034
Double Action Bottom Strap GBIC0035
GBIC0036
Double Action Floor Pivot 150kg
Intumescent Packs GBIC0012
Intumescent Pack to suit Boxer Size 2-4 GBIC0013
GBIC0030
Intumescent Pack to suit Boxer Size 3-6
GBIC0031
Intumescent Pack to suit Single or Double Action Guide Rail
GBIC0037
Intumescent Pack to suit Single or Double Action Electromechanical Guide Rail
Intumescent Pack to suit Double Action Pivot Set
(1) An additional suitable certificate for the door is necessary when using on smoke and fire doors
(2) Not permitted for use with smoke and fire doors
Please contact your local George Boyd for further details on Lo-call 0845 601 3547
16
M50390 Door controls:Layout 1 05/09/2007 09:50 Page 16
Finishes
Door Closer SES
ITS96 Size EN 2-4 HWDMA205
ITS96 Size EN 3-6 HWDMA210
Finishes
Door Closer SES
Hold Open Device HWDMA215
Sizes
Door Closer 2-4 3-6
30 min Intumescent Pack HWDMA200 HWDMA201
60 min Intumescent Pack HWDMA202 HWDMA203
Finishes
Floor Pivot
SSS
7471K 200kg HWDMA900
7471AX 300kg HWDMA905
17
M50390 Door controls:Layout 1 05/09/2007 09:50 Page 17
Dorma BTS80 floor spring mechanism with hold open, delayed action and
backcheck (not for use on fire doors).
. Fixed power size EN3/4/6
. Successfully independent type tested to BS EN 1154
. Maximum door widths; 950mm (EN3), 1100mm (EN4), 1400mm (EN6)
. Maximum door weight 300kg
. Non handed for use on single/double action doors
. Mechanical backcheck valve adjustable delayed action and hold open as standard
. Valve adjustable sweep and closing speeds
. Adjustable hydraulic hold open between 75-180 degrees
Dorma BTS80F floor spring mechanism with delayed action and backcheck.
. Fixed power size EN3/4/6
. Successfully independent type tested to BS EN 1154
. Maximum door widths; 950mm (EN3), 1100mm (EN4), 1400mm (EN6)
. Maximum door weight 300kg
. CERTIFIRE Approved for fire doors ITT 60 (CF128)
. For use on single/double action doors and suitable for use on fire doors
. Valve adjustable sweep and latch speeds & mechanical backcheck as standard
Spring Mechanism
BTS75V Size 1-4 HWDMA540
BTS80 Size 3 HWDMA735
BTS80 Size 4 HWDMA736
BTS80 Size 6 HWDMA737
BTS80F Size 3 HWDMA801
BTS80F Size 4 HWDMA800
BTS80F Size 6 HWDMA802
BTS80EMB Size 3 HWDMA803
BTS80EMB Size 4 HWDMA804
BTS80EMB Size 6 HWDMA806
Double Action Accessory packs to suit floor spring mechanisms .
Finishes
Single action accessory pack consists of; BTS80 Accessory Pack SSS SBR
Single action top centre, bottom strap & Single Action HWDMA775 HWDMA795
Double Action HWDMA780 HWDMA790
cover plate
Double action accessory pack consists of;
Adjustable top centre, double action bottom
BTS75 Accessory Pack SSS SBR
strap & cover plate
Single Action HWDMA765 HWDMA770
Double Action HWDMA755 HWDMA760
18
M50390 Door controls:Layout 1 05/09/2007 09:50 Page 18
GEZE TS550E (ER) power adjustable electro-hydraulic hold open floor spring
mechanism .
. Tested to BS 476 Part 22:1987 1Hour Fire Rated
. Adjustable power size EN 3 - 6
. Electro-hydraulic hold open 80 - 180 degrees (TS550E), 80 - 120 degrees (TS550ER)
. Single action door application only on TS550E
. Single or double action door application on TS550ER
Single Action . Valve adjustable closing speed
. To suit door size up to 1400mm wide and 250kg maximum weight in dry areas only
. Options include; Electro-hydraulic hold open integrated selector system (TS550E - IS)
Spring Mechanism
TS490 Size EN 4 HWGZTS4M
TS500 Size EN 4 HWGZTS5M
TS550 Size 2-5 HWGZTS5A
TS550E Size 2-5 (80-180) GZTS550E
TS550ER Size 2-5 (80-120) GZTS550R
19
M50390 Door controls:Layout 1 05/09/2007 09:51 Page 19
. Door is held open electro-magnetically and is controlled by the fire/smoke alarm system
. Must be used in conjunction with overhead door closers or floor springs
. Door is released by fire/smoke alarm being activated manually, automatically or by a
power failure to the unit
. The door can be closed manually, by pulling at the leading edge
. Power requirements 24v DC 71 mA
. Transformer rectifier and plug in relay available
Finishes
Hold Open SES PBR
533 Wall Mounted IRGB6670 IRGB6690
533C Outer Case for Surface Mounting IRGB6675 IRGB6695
534 Floor Mounted IRGB6700 IRGB6702
Groom Hold Open Devices Groom REM20 DAN electro magnetic hold open unit.
. Must be used in conjunction with overhead door closers or floor springs
. Door is held open electro-magnetically and is controlled by the fire/smoke alarm system
. Door is released by fire/smoke alarm being activated manually or automatically
. The door can be closed manually, by pulling at the leading edge
. Holding force 20 daN . Power supply 24 or 48v DC
. Power on or fail safe mode of operation . A power failure to the unit
Finishes
Hold Open WHITE SES SNP
REM20 DAN Surface Mounted HWDE0010 HWDE0020 HWDE0030
HWDE0040 _ _
REM20 DAN Flush Fitting
20
M50390 Door controls:Layout 1 05/09/2007 09:51 Page 20
Finishes
Door Closer PBR PCP SCP
Perkomatic HWSH0312 HWSH0316 HWSH0314
Finishes
Door Closer PBR PCP
Perko c/w Square Faceplates HWSH0300 HWSH0302
Perko c/w Rounded Faceplates HWSH0310 HWSH0305
Concealed Closer
Concealed chain spring door closer.
. Fire test certificate BS476:Part 22:1987
Finishes
Door Closer PBR PCP SCP
Concealed Closer CBAA45PB CBAA45CP CBAA45SC
Concealed Closer (Radius Forend) CBAA45RP CBAA45PC CBAA45RS
21
M50390 Door controls:Layout 1 05/09/2007 09:51 Page 21
Finishes
Door Closer CHAMPAGNE
Door Selector
DEDS door selector.
. The range enables a pair of self closing doors with rebated meeting stiles to close in the
correct sequence automatically, no matter which door is opened first
. Suitable for timber doors of any width up to 1220mm (4’0) per door, and all standard
thicknesses and rebate sizes
. For applications under difficult or unusual conditions please supply all available
information for confirmation of specification
. Supplied complete with fixings and full installation instructions
. BS EN 1158
. Fire Rated Model - 30 minute Fire Rated (GBDS0006)
Finishes
Door Selector SAA GAA PCP PBR SSS
Door Selector GBDS0001 GBDS0002 GBDS0003 GBDS0004 GBDS0005
Door Selector (Fire Rated) GBDS0006 _ _ _ _
22
M50390 Door controls:Layout 1 05/09/2007 09:51 Page 22
Door Selector
Dss Door selector.
. Designed to ensure correct closing order from a pair of self closing rebated doors,
regardless of which door is opened first
. Adjustable opening and closing speeds
. Suitable for right or left handed doors
. Maximum door width 1220mm
. Maximum rebate size 25mm
Finishes
Door Selector SAA PBR
DSS HWGP0212 HWGP0214
Finishes
Limiting Stay BZP
Concealed HWALL400
Finishes
Limiting Stay SES
Medium Duty HWWL0360
Light Duty HWWL0380
Finishes
Friction Stay
BZP
90 degree HWWL0340
23
M50390 Door controls:Layout 1 05/09/2007 09:52 Page 23
Door Holder
Ball stopper door holder.
. Maximum door width 1000mm
. Maximum door height 2100mm (lightweight),
2200mm (heavyweight)
. Minimum door thickness 40mm
. Maximum door weight 40kg (lightweight), 100kg
(heavyweight)
. Door is held open when positioned above stopper
ball - released by pulling door away from ball
Finishes
Door Holder SSS PSS
KWS1019 Lightweight DE1019SS DE1019PS
KWS1021 Heavyweight DE1021SS DE1021PS
Door Holder
Ball stopper door holder with limiting stop.
. Maximum door width 1000mm
. Maximum door height 2100mm
. Minimum door thickness 40mm
. Maximum door weight 40kg
. Door should be guided to rest against limiting stop &
above ball to hold door, released by pulling door
away from ball
Finishes
Door Holder SAA BAN SNP
KWS1020 DE1020SA DE1020BA DE1020SN
Door Holder
Door holder for doors with closing mechanism.
. Maximum door width 1000mm
. Maximum door height 2200mm
. Minimum door thickness 80mm
. Door is moved beyond a spring loaded plastic slide
stop & is then held open by the counter pressure of
the closing mechanism on the plastic slide
. Supplied with brass angle which acts as an edge
guard for wooden doors or protects the plastic slide
from abrasion on metal doors
Finishes
Door Holder PBR SSS PSS
KWS1005 DE1005PB DE1005SS DE1005PS
Note: Door holders on this page should not be used with fire doors.
24
M50390 Door controls:Layout 1 05/09/2007 09:52 Page 24
Door Holder
Light duty push down hold open device.
. Maximum door width 900mm
. Maximum door height 2000mm
. Maximum door weight 25kg
. Door may be held open in any position by kicking
down the push bolt until the stopper is pressed
firmly on to the floor
. Light pressure on the trip plate releases the push bolt
& the door
Finishes
Door Holder SES PBR SSS PSS
KWS1024 Light Duty DE1024SE DE1024PB DE1024SS DE1024PS
Door Holder
Heavy duty push down hold open device.
. Maximum door width 900mm
. Maximum door height 2000mm
. Maximum door weight 40kg
. Door may be held open in any position by kicking
down the push bolt until the stopper is pressed
firmly on to the floor
. Light pressure on the trip plate releases the push bolt
& the door
Finishes
Door Holder SES PBR SSS PSS
KWS1026 Heavy Duty DE1026SE DE1026PB DE1026SS DE1026PS
Door Holder
Concealed/flush mounted magnetic door hold open device.
. Maximum door width 1000mm
. Maximum door height 2200mm
. Maximum door thickness 40mm
. Maximum door weight 60kg
. Door may be held open by positioning the door
above the floor mounted catch plate which holds the
door open
. Door is released by pulling the leading edge to move
the door away from the magnet
Finishes
Hold Open SES
1002 Concealed DE1002SA
Hold Open SES SNP BA
1004 Flush DE1004SA DE1004SN DE1004BA
Note: Door holders on this page should not be used with fire doors.
25