Professional Documents
Culture Documents
HVCCTV
HVCCTV
Streamers or
Streamers or Network Network
Network Attached Cameras
Cameras Storage Device (All supported DVM models)
Server
UDP Port 10001 (Multi- TCP Port 135 (DCOM)
monitor ping) Configurable DCOM Ports
TCP Port 135 (DCOM) (for TCP Port 1433 (SQL Server)
multi-monitor TCP Port 10000 (Event Server)
clients only)
TCP Port 135 (DCOM) TCP Port 80 (HTTP),
Configurable DCOM Ports TCP Port 135 (DCOM),
TCP Port 26026 TCP Port 10001 (Live Video) Configurable DCOM Ports
(Keyboard Manager) TCP Port 10001 (Playback) TCP Port 10000 (Event Server)
TCP Port 10001 (Live Video) DVM Camera
TCP Port 10001 (VMD Tuning) TCP Port 60000 (DVA Configuration)
TCP Port 52111
(Keyboard Service) TCP Port 10010 (Authentication) TCP Port 443 (HTTPS –
TCP Port 10001 (Playback) Server(s)
TCP Port 10010 (Authentication)
DVM Console Logon)
Database Server:
A Database Server is responsible for:
• Storing the configuration and runtime information of the Honeywell DVM system.
• Processing requests and distributing state information to Honeywell DVM clients.
• Managing communication between the key components of the Honeywell DVM system.
• Managing communication between Honeywell DVM systems if the system is part of a Distributed Video Architecture.
• Managing communication between Honeywell DVM and any integrated EBI or Experion systems.
A Database Server contains the:
• DVM SQL Server database
• Audit log
• Web server and Web services
Camera Server:
Multiple Camera Servers, each on a separate machine, may exist within a single Honeywell DVM system.
Each Camera Server is capable of:
• Requesting and receiving live video and audio from streamers.
• Transmitting live video and previously recorded video to clients.
• Receiving camera control commands from clients and sending the commands to the streamers (and cameras).
• Storing video for cameras.
• Archiving video recordings to disk.
• Retrieving archived video from offline media.
• Executing server-based video analytics algorithms.
• Executing server-based camera tamper detection algorithms.
• Initiating and maintaining calls with intercom cameras.
• Managing interactions with input and output devices.
• Retrieving and streaming edge recordings for on-demand playback.
IP Addresses of the camera’s installed at NTLB, with switch and network port numbers, as issued by UofW I.T. Services:
Function / Comms
Item Specialist Location Floor O/Let Switch Port IP Address Vlan Gateway Mask
Description Room
1 CCTV (No1) CCTV External Pole base Gnd TBA C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 3 10.233.48.4 800 10.233.48.254 255.255.255.0
2 CCTV (No2) CCTV External Pole base Gnd TBA C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 4 10.233.48.5 800 10.233.48.254 255.255.255.0
3 CCTV (No3) CCTV External Pole base Gnd TBA C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 1 10.233.48.6 800 10.233.48.254 255.255.255.0
4 CCTV (No4) CCTV External Pole base Gnd TBA C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 2 10.233.48.7 800 10.233.48.254 255.255.255.0
5 CCTV (No5) CCTV Ground floor rear stairwell west Gnd N-23 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 5 10.233.48.8 800 10.233.48.254 255.255.255.0
6 CCTV (No6) CCTV Ground floor rear entrance west Gnd N-15 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 6 10.233.48.9 800 10.233.48.254 255.255.255.0
7 CCTV (No7) CCTV Ground floor centre entrance lobby west Gnd M-19 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 3 10.233.48.10 800 10.233.48.254 255.255.255.0
8 CCTV (No8) CCTV ground floor front entrance lobby west Gnd M-16 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 4 10.233.48.11 800 10.233.48.254 255.255.255.0
9 CCTV (No9) CCTV ground floor front entrance lobby east Gnd P-05 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 7 10.233.48.12 800 10.233.48.254 255.255.255.0
10 CCTV (No10) CCTV Ground floor centre entrance lobby east Gnd P-03 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-02 8 10.233.48.13 800 10.233.48.254 255.255.255.0
11 CCTV (No11) CCTV Ground floor rear entrance lobby east Gnd O-02 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 5 10.233.48.14 800 10.233.48.254 255.255.255.0
12 CCTV (No12) CCTV Ground floor rear stairwell east Gnd O-22 C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 6 10.233.48.15 800 10.233.48.254 255.255.255.0
13 CCTV Camera Storage CCTV Concierge Office Gnd C-TB-A-7/0A C-TB-A-7-0A-A-3850-SW01-03 7 10.233.48.16 800 10.233.48.254 255.255.255.0
Product deliverables:
Item
Version/build
Equip adapter 2.40.0.0
Grandeye adapter 1.0.0.5
HD3MDIP adapter 7.1.6.1
HD4MDIP adapter 8.1.1.2
ONVIF adapter 1.4.0.9
Panasonic adapter 1.1.0.53
Pelco Sarix adapter 1.1.0.12
S&P Series PSIA adapter 13.2.3.0
RapidEye adapter 2.0.1.6
Sony adapter 1.0.2.39
Sony RTSP adapter 1.0.0.22
Microsoft SQL Server 2014
Honeywell Diagnostic Framework 1.0.4426.41411 (410.2)
Microsoft .Net Framework 3.5 with SP1 3.5
Microsoft .Net Framework 4.0 4.0
Microsoft .Net Framework 4.5 4.5
Honeywell DVM R400.2 SP1 CSR Manager 400.2.9481
Honeywell Video Analytics Suite 4.9.0.45
Microsoft Data Access Components with SP1 2.8
Microsoft Security Hotfix KB2640103
Microsoft Security Hotfix KB2670838
Microsoft Security Hotfix KB2734642
DVM VM Specification:
This is a standard spec which should be fine for NTLB + NIAC. As he said it’s easy to add more.
There’s a note on VMWare PCs: Dedicated NIC (physical network connection) recommended for each Honeywell DVM Server Virtual PC. Must configure the two hard drives (Disk Set 1 and 2) above as virtual drives
connected to two dedicated physical disk drive sets.
The following should be excluded from anti-virus scans: DVM data directory (DB Servers only) and DVM Clip directory (Camera Servers Only).
DVM_Manager – is a local windows account that must be created on all DVM servers/storage devices where applicable and clients. It is used to It must be set to password expiry disabled, local logon can be
disabled for this account. It is used for all dvm processes/services/components and runs in the background.
DVM_USERS – is a windows account group that domain or local accounts must be added to in order use the client side of DVM. It connects between Client machines, DB servers and Camera Servers.
DVM_Database – is a user account group created on the database servers for database configuration tasks. This should be Honeywell use only.
DVM_Applications – is a user account group created on the camera servers for configuration tasks. This should be Honeywell use only.
As a note, IE clients use the windows account to determine their DVM logon. These just need adding to the DVM_User group.
Operator based security is only available on console when integrated with EBI. Will have to follow the same guide as IE clients.
DVM Console uses HTTPS to communicate securely to Honeywell DVM Database Servers for authentication purposes. Digital certificates are used to secure this transport. The digital certificate is bound to the port
configured in IIS for HTTPS traffic on the Database Servers. This is generally port 443.