Professional Documents
Culture Documents
18 WATERSTOP en
18 WATERSTOP en
18 WATERSTOP en
Hardness Shore A 70 – 80
Water Pressure Up to 50 m
Movement capacity Up to 10 mm
• Water Stop are made from thermoplastic PVC and can therefore be welded.
• The ends are heated with welding equipment until the PVC gets plastic and then
immediately pressed together.
• Pro‐Water Stops are allowing easy on‐site welding, including the prefabrication of cross, T,
Application L, and corner pieces.
• A wide range of standardized junction pieces are available.
• All have a 30 cm free leg, allowing easy site welding to Prokem water bars.
• In case non‐standardized junction pieces are required, a drawing must be provided, giving
exact details of angles.
Packaging Rolls at 15 and 30 Lm.
Product Data Sheet Edition 12.2022 Identification No. J T - 18 Water Stop 1/2
Types & Dimensions of Waterstop
Roll Maximum
Width Nominal thickness
Illustration Description Type Length water
cm mm ±10%
m head m
3 mm
4 mm
V 20 20 30 10
5 mm
6 mm
3 mm
• Centrally
4 mm
For Construction Joints
placed 5 mm
Waterstop V24 24 30
6 mm & 6/4 mm
15
• Installed in the 8 mm
center of 10 mm & 10/8 mm
concrete 3 mm
structure 4 mm
• Designed for 5 mm
easy anchoring V30 30 20 25
6 mm
to 7 mm
reinforcement 10 mm & 10/6 mm
with special
fixing clips
4 mm
15 m up
V32 32 20 5 mm
to 30 m
10 mm
3 mm
4 mm
O20 20 15 10
5 mm
For Expansion Joints
6 mm
3 mm
Maximum 20 4 mm
mm expansion O24 24 15
5 mm
25
and 10 mm 6 mm
Shear 7 mm
movement 10 mm
4 mm
5 mm
O32 32 15 6 mm 30
7 mm
10 mm
5 mm
Surface waterstop
RD26 26 15 ‐‐‐‐‐
10 mm
Installation on
the surface of
concrete
structures
5 mm
AR24 26 15 ‐‐‐‐‐
10 mm
Product Data Sheet Edition 12.2022 Identification No. J T - 18 Water Stop 2/3
Shelf life & Storage Open shelf life as long as it is stored away from heat and fires sources.
Product Data Sheet Edition 12.2022 Identification No. J T - 18 Water Stop 3/3