Professional Documents
Culture Documents
FRT 005
FRT 005
GR Series Technical
FR Series BulletinBulletin
Technical 1 of
2
5.
6.
Application Tips
* When the Unit /Stripper FR-S is installed on the machine, it is necessary to connect
the Switch Killer on the Stack paper feed switch connector (Wireharness side).
* It is necessary to install the Pickup Roller Core and Rotation Stopper on the Pickup
Roller Shaft to prevent buckled feeding paper on the second paper feed area from
kicking back (return to the first paper feeding area).
Spare Part Supply
The modified parts are available as spare parts for field maintenance.
Switch Killer is packed with Unit/Stripper FR-S.
Component parts, No. 1 to 4, of Unit/ Stripper FR-S in the figure are same as Unit/ Stripper S
for GR models.
Newly-registered part
019-91760-004 Unit/ Stripper FR-S
1. 015-34434-207 * Cover Plate; Stripper
2. 015-34448-208 * Stripper Pad; SR
3. 015-34452-000 * Stripper Roller ;SR
4. 019-11826-000 * Giude Base S; Stripper
5. 019-55101-002 * Switch Killer
6. 019-11822-004 Rotation Stopper(This part is not included in the Unit/ Stripper FR-S.)
Attached :
ISSUE
NO. FRT-005
Rotation
Modification Procedure stopper
Core;Pickup
Roller
Rotation
2. Set the rotation stopper ass'y on the Scraper Ass'y.
stopper
a'ssy
Caution:
Set the rotation stopper ass'y in the correct
direction.
(The rotation stopper should be placed in inner side
as shown by the figure on the right.
Paper feeding cluch may be damaged if it is set
incorrectly.)
5. Slide the yellow Paper guide roller all the way to the
right.
Note:
The pickup roller shaft may not rotate
smoothly if the paper guide roller and the rotation Paper guide
stopper ass'y are touching against the Scraper roller
Ass'y too strongly.
Attached :