Professional Documents
Culture Documents
Nói Card
Nói Card
Student A: Ask and answer to exchange information about a course at a university in the
card
University (1) What is its name?
Campus A: Minh Khai Ward, Bac Tu Liem District, Hanoi
Campus
Campus B: Tay Tuu Ward, Tu Liem District, Hanoi
address
Campus C: Le Hong Phong Ward, Pu Ly City, Hanam
Major (2) What major do you want to study?
Mode of study Full-time
Duration (3) How long does it last?
• Entry requirement: 23 points over 30 for Math, Physics and
Chemistry
Course
• Facility: (4) How is the facility there?
description
• Total credits: 182
• Basic subjects: (5) What are the basic subject you will study in U
Student B: Ask and answer to exchange information about a course at a university in the
card
University Hanoi University of Industry
Campus
(1) Where is it?
address
Major Mechanical Engineering
Mode of study (2) Is it a full-time course?
Duration 4 years
• Entry requirement: (3) What is the entry requirement?
• Facility: modern
Big libraries open 6 days a week with a lot of books,
Course
documents, newspapers
description
15 computer rooms, 10 labs with over 1500 computers.
• Total credits: (4) How many credits does the course have?
• Basic subjects: Physical education, Physics, Maths, Philosophy
Suggested answer:
Turn 1:
A: Hi B. How are you?
B: I’m good. Thanks. I am going to join a university next year.
A: What is its name?
B: It is Hanoi University of Industry.
A: What major do you want to study?
B: I want to study Mechanical Engineering
A: So How long does it last?
B: It normally lasts 4 years.
A: How is the facility there?
B: It’s very modern with big libraries opening 6 days a week with a lot of books,
documents and newspapers. There are 15 computer rooms, 10 labs with over 1500
computers.
A: Wow! What are the basic subjects you will study there?
B: They are physical education, chemistry, physics, maths and philosophy.
A: Try you best. I believe that you can enter this school.
B: Thank you. I hope so, too.
Turn 2:
B: Hi A. How are you?
A: Not bad. Thanks. I want to join a university next year.
B: Really? Where is it?
A: It has three campuses. Campus A is located in…
B: Such a big school. Is it a full-time course?
A: Yes, it is.
B: What is the entry requirement?
A: To enter this school, students need get 23 points over 30 for Maths, Physics and
Chemistry.
B: So How many credits does the course have?
A: It has 182 credits.
B: I hope you will join this school next year.
A: Thank you. I hope so, too.
Speaking card 2: Activity 4A – Page 9 Course book + Activity 1 – Page 9 Teacher’s handout (Đây là card
trên lớp, tương tự card 1 thôi nhưng 1 bạn chỉ hỏi và 1 bạn chỉ trả lời)
Suggested answer:
P: Hey Jack, How is it going?
J: Oh, Peter, I am so busy with my study at university now.
P: Where are you studying?
J: I’m studying at Hanoi University of Industry.
P: Oh really? What major are you studying?
J: I’m studying Mechanical Engineering there. It is so wonderful.
P: Is it a full time course?
J: Yes, it is.
P: How long does it last?
J: It lasts four years.
P: That’s great. How many campuses are there?
J: There are three big campuses. The main campus is in Minh Khai Ward, Bac Tu Liem
District, Hanoi.
P: How is the facility at that university?
J: We have a big library opening 6 days a week with a lot of books, documents and
newspapers. They are so helpful for me to study and do research. It also has 15 computer
rooms and 10 labs with over 1500 computers for students to study and learn English.
P: Do you learn a lot of subjects?
J: In this term we only have some basic subjects like maths, philosophy, physics and
physical education.
P: I hope to join the school next year. Thank you for your useful information.
UNIT 3: How long is it? (Conversations about using a correct measurement system)
Speaking card 5: Đóng vai hai kỹ sư trao đổi để tìm ra hệ thống đo lường chính xác.
Suggested answer:
UNIT 4: Could you classify it? (Conversations about the classification of materials and
selecting suitable materials for a project)
Speaking card 6: Đóng vai 2 người bạn hỏi và trả lời về phân loại vật liệu. Card này cần 2 turns.
Nên tạo tình huống ban đầu. Có thể tham khảo ví dụ dưới của cô.
Suggested answer:
Turn 1:
A: Hi B. How are you doing?
B: Not bad. Thanks. And you?
A: I am good. I am making a report about materials. I need your help.
B: Yes, of course.
A: I don’t know much about the classification of materials. How are metals divided?
B: They are divided into ferrous and non-ferrous metals
A: What is ferrous metals?
B: They contain iron.
A: and what about non-ferrous metals?
B: They don’t contain iron.
A: What are some common examples of ferrous metals?
B: Iron, steel and cast iron
A: What are some typical examples of non-ferrous metals?
B: Aluminum, copper. What is alloy?
A: It is a combination of different metals.
B: What are some common examples of alloy?
A: They are steel, brass, bronze and aluminum alloys.
B: How is plastic divided?
A: It is divided into thermoplastic and thermoset.
B: What are composite materials?
A: A combination of two or more materials to improve mechanical properties.
B: What’s the property of ceramics?
A: They are good insulators, hard, resistant and strong.
B: Well. That’s enough. Thanks for your help.
A: You’re welcome.
Speaking card 7: Activity 1 - Page 48 Teacher’s handout (Card đóng vai khách hàng – kỹ sư trao
đổi đưa ra lựa chọn vật liệu phù hợp với dự án cho trước. Nếu card cho sẵn 2 lựa chọn về vật liệu
thì bám vào nói theo. Card dưới đây k có thì các e cần học thuộc)
Student A is a client. You are building a new generator casing. Ask student B questions
to find out the suitable material.
Student B is an engineer. Talk to student A about materials for his/ her project.
Client Engineer
Greeting. Say you want to find suitable
material for new project.
Agree to help.
Ask for advice on materials.
Give at least two main options.
Ask for recommendation.
Recommend materials.
Ask about price.
Give details of price.
Choose one suitable material
Suggested answer:
Client: Hi Birth. I’m calling regarding materials for the new generator.
Engineer: Okay. What can I do for you?
Client: I need advice on materials for the casing. I want to use insulation materials.
Engineer: Well, your two main options are stainless steel and alloy.
Client: Which do you recommend?
Engineer: Alloy’s electrical resistance makes it a great choice. And it’s not brittle, so it
won’t break from frequent use.
Client: Is it more expensive than stainless steel?
Engineer: Yes, it does cost more. Is that an issue?
Client: Somewhat. I’m on a tight budget.
Engineer: Well, stainless steel is cheaper. It is also corrosion-resistant and very durable.
However, alloy requires less maintenance than stainless steel.
Client: So stainless steel is better value?
Engineer: Yes. At least in the long-term.
UNIT 5: Which step goes first? (Conversations about the progress of design process and
problems in the design process)
Speaking card 8: Card đóng vai người kỹ sư và quản lý trao đổi về tiến độ quy trình thiết kế.
Student A: You are a firm owner. Ask student B about his/ her design process.
Student B: You are an engineer. Talk to student A about a design that you are working
on.
Suggested answer:
Speaking card 9: Card đóng vai người kỹ sư và quản lý hỏi và trả lời những vấn đề nảy sinh và
hướng giải quyết trong quy trình thiết kế. Nhớ học các ý trong bảng problems – solutions lesson
2 unit 7 trong slides vì card đi thi nội dung có thể thay đổi chút.
Student A: You are a manager. Make a conversation with an engineer about design
process and problems
Project (1) …
Finished stages (2) …
Current stage (3) …
Problem 1 (4) …
Solution for problem 1 The correct dimension is on drawing 76E.
Disregard the dims on drawing 78E.
Problem 2 (5) …
Solution for problem 2 Revise the drawing
Student B: You are an engineer. Make a conversation with your manager about design
process and problems
Project Milling machine design
Finished stages 3 first steps 2 weeks ago
Current stage Assemble detailed design
Problem 1 There is a discrepancy between drawing
76E and 78E, which indicates conflicting
dimensions for the width of the band saw
blade.
Solution for problem 1 (1) …
Problem 2 Find a problem with drawing 63 on site.
The detail specified doesn’t work.
Solution for problem 2 (2) …
Suggested answer:
Manager: Good morning! How are you doing?
Engineer: I’m doing well! And you?
Manager: Good! How is the milling machine design project going?
Engineer: I finished the first three steps two weeks ago.
Manager: So, Which stage are you in now?
Engineer: Currently we are in the assemble detailed design stage.
Manager: Is everything good?
Engineer: We have some problems. There is a discrepancy between drawing 76E and
78E, which indicates conflicting dimensions for the width of the band saw blade.
Manager: Let me see. The correct dimension is on drawing 76E. I think you should
disregard the dims on drawing 78E.
Engineer: Okay.
Manager: Any other problems?
Engineer: I also find a problem with drawing 76E on site. The detail specified doesn’t
work.
Manager: Oh really? You need to revise the drawing right away!
Engineer: I also think that. Thanks for your advice!
Manager: You are welcome!
Suggested answer:
Student A Student B
Hello What are you doing here?
Hi A. I am designing a robot for the coming
robotics competition.
Sounds interesting. What’s its name?