Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Flow of modes and functions TROUBLESHOOTING

★ ON/OFF switch signals input to controller

1) Method of reading input signal to controller

• Input status display 0: No input (OFF)

• Input status display 1: Input (ON)

c Monitoring code
d Input status
Starting from the left, the status is displayed in
turn from D-IN-0 to D-IN-7.

2) Method of reading output signal D-OUT-0.....7

• Output status display 0: No output (OFF)

• Output status display 1: Output (ON)

c Monitoring code
d Output status
Starting from the left, the status is displayed in
turn from D-OUT-0 to D-OUT-7.

Monitor Panel
Monitoring Input/Output
No. Display Item Content of ON/OFF Switch
Code Signal
D-IN-0 Head lamp Head lamp lights up = ON (24V) / OFF (OPEN)
D-IN-2 Starting switch output Starting motor started = ON (24V) / OFF (OPEN)
1 40900
D-IN-4 Auto grease A Tank empty or abnormal = ON (24V) / OFF (OPEN)
D-IN-5 Auto grease B Operating or abnormal = ON (24V) / OFF (OPEN)
D-IN-12 Turn signal right Right turn signal lights up = ON (24V) / OFF (OPEN)
D-IN-13 Turn signal left Left turn signal lights up = ON (24V) / OFF (OPEN)
2 40901
D-IN-14 ‘ Switch input Switch pressed = ON (24V) / OFF (OPEN)
D-IN-15 „ Switch input Switch pressed = ON (24V) / OFF (OPEN)
D-IN-16 Breakter oil pressure (Front) Oil pressure normal = ON (GND) / (OPEN)
3 40902 D-IN-17 Breakter oil pressure (Rear) Oil pressure normal = ON (GND) / (OPEN)
D-IN-20 Air cleaner colgging No clogging = ON (GND) / (OPEN)
D-IN-26 Parking brake Parking brake applied = ON (GND) / (OPEN)
D-IN-27 Engine water level Water level normal = ON (GND) / (OPEN)
4 40903 D-IN-28 Engine oil pressure Drop in oil pressure = ON (GND) / (OPEN)
D-IN-29 Engine oil level Oil level normal = ON (GND) / (OPEN)
D-IN-30 Emergency steering motor normal Emergency steering motor actuated = ON (GND) / (OPEN)
D-IN-32 Load meter sub-total switch Switch pressed = ON (GND) / (OPEN)
D-IN-33 Load meter candel switch Switch pressed = ON (GND) / (OPEN)
D-IN-34 High beam switch High beam = ON (GND) / (OPEN)
5 40904 D-IN-36 Service function 2 Switch pressed = ON (GND) / (OPEN)
D-IN-37 > Switch input Switch pressed = ON (GND) / (OPEN)
D-IN-38 < Switch input Switch pressed = ON (GND) / (OPEN)
D-IN-39 Drop in steering pressure Oil pressure normal = ON (GND) / (OPEN)

20-242 WA470-5H / WA480-5H

You might also like