Professional Documents
Culture Documents
Process and Mismatch Reappear Tutorial - Kainan Wang
Process and Mismatch Reappear Tutorial - Kainan Wang
Once the ADE XL window opens, the output setup should be the same as you see in the ADE from which you launched the
ADE XL. Then select Monte Carlo Sampling from the menu.
Click here to setup the
Monte Carlo simulation
(shown below)
While running the Monte Carlo simulation, the results window is open so you can see the Yield, Min, Max, Mean and Sigma,
etc. When you select Detail or Detail – Transpose from the menu, the result will show the output of every single run so that
you can check the specific condition.
5. Re-run a specific condition
From the Detail or Detail-Transpose results window, you can check which point you are interested in and then re-run it. For
example, if I think the bandwidth of the “Point 3” is not satisfactory and want to look into this condition, I can call up the
settings and specify this condition in the setup window.