Professional Documents
Culture Documents
Template BBU 3
Template BBU 3
Cell4GFDD
Ne errors:
SubNetwork=3009,ManagedElement=722
Record failure exists. For details, refer to the record result.
TemplateType: Business
ManagedElementType: ITBBU
Product: LTE
Template Name: cfgRadioNet_LTE
ITRAN-
PNF:GULN_ITRAN_V5.55.20.20P22JX,GULN_ITRA
N_V5.65.20.20JX,V5.55.20.20P22,V5.55.20.20P22MP
Mim Type:Mim Version: 02,V5.65.10.20F20,V5.65.20.20
R -- -- --
Close[0] Close[0] 2;1;4;4
ENBFuncti
on and
Cell4GFD
This parameter sets the D are to
Whether
enum:
priorities of the integrity deleted
delete theat
Unassociat
protection algorithms the same
intra-UME
ed
isDelNbrA
supported by the eNodeB. time, the
neighbor
deletion[0]
ItintegProtAlgPriority
is an array parameter ndRelation
Cell4GFD
cell and
Associatio
consistingprotection
Integrity of four elements
priority Dneighbor
record is
n
and (from
each element
high to indicates
low) deleted
relation
enumArray:[0, 1, 2, 3, 4] deletion[1]
an integrity protection first, and
model default: 2;1;3;0 model
algorithm. The priorities by then the
example: 2;1;3;0 default: 0
which the corresponding ENBFuncti
algorithms are used by the on record
eNodeB decrease in turn. is deleted.
-- --
2;1;4;4
Result MODIND ManagedElementType SubNetwork
-- -- -- M
Normal[0] Outdoor Macro Cell[1] 0 184
Normal[0] Outdoor Macro Cell[1] 0 184
Normal[0] Outdoor Macro Cell[1] 0 187
Normal[0] Outdoor Macro Cell[1] 0 184
Normal[0] Outdoor Macro Cell[1] 0 187
Normal[0] Outdoor Macro Cell[1] 0 183
Normal[0] Outdoor Macro Cell[1] 0 188
Normal[0] Outdoor Macro Cell[1] 0 183
Normal[0] Outdoor Macro Cell[1] 0 183
Normal[0] Outdoor Macro Cell[1] 0 188
Normal[0] Outdoor Macro Cell[1] 0 187
94967295;4294967295;429
4967295;4294967295;4294
967295;4294967295;42949
67295
example:
0;4294967295;4294967295
This parameter sets the
;4294967295;4294967295;
indicator of the frequency
4294967295;4294967295;4
urgencyeai tac mmModeSwch band freqBandInd
where uplink and
294967295;4294967295;42 enum:
EmergencyAlarm
Emergency alarm area
Area The parameter is used to downlink carrier
94967295;4294967295;429 Close[0]
code. If the value is the
Code identify aTAC
tracking area The Switch of MM Mode frequencies
Frequency are
Bandlocated. The
Indicator
4967295;4294967295;4294 Open[1] long:[1..5, 7..14, 17..28,
same as the value received within the scope of a The switch of MM mode, uplink and downlink carrier
967295;4294967295;42949 long:[0..65535] 31..32, 46, 65..76, 85,
from core network, the PLMN.The parameter is The Cell is MM mode frequencies of a cell must
67295 model default: 0 model default: 0 87..88, 101]
earthquake and tsunami used for UE location when FunctionMode of belong to the same
message will be send to management.The parameter Baseband Board is MM frequency band.
UE. is configured by operator. mode. Effective when Cell Reset
-- -- -- M
0;4294967295;4294967295; 40901 Close[0] 8
0;4294967295;4294967295; 40901 Close[0] 66
0;4294967295;4294967295; 40901 Close[0] 66
0;4294967295;4294967295; 40901 Close[0] 7
0;4294967295;4294967295; 40901 Close[0] 7
0;4294967295;4294967295; 40901 Close[0] 66
0;4294967295;4294967295; 40901 Close[0] 66
0;4294967295;4294967295; 40901 Close[0] 8
0;4294967295;4294967295; 40901 Close[0] 7
0;4294967295;4294967295; 40901 Close[0] 7
0;4294967295;4294967295; 40901 Close[0] 8
9.2M[23] 9.2M[23]
Radio Frequency Channel Channel Number
13.2M[24] 13.2M[24]
Number (EARFCN) used in (EARFCN) used in a cell.
13.6M[25] 13.6M[25]
a cell. A center carrier A center carrier frequency
14M[26] 14M[26]
frequency is calculated as is calculated as follows:
17.4M[27] 17.4M[27]
follows: F_UL = F_DL = F_DL_low + 0.1 ×
17.8M[28] 17.8M[28]
F_UL_low + 0.1 × (N_UL - (N_DL - N_Offs-Dl),
18.2M[29] 18.2M[29]
N_Offs-Ul), where F_UL is where F_DL is the center This parameter sets the
earfcnUl earfcnDl 18.6M[30]
bandWidthDl 18.6M[30]
bandWidthUl
the center carrier frequency, carrier frequency, downlink system
7.5M[31] 7.5M[31]
F_UL_low
UL Center is the lowest
Carrier F_DL_low
DL Center is the lowest
Carrier bandwidth. It is used to This parameter sets the
14.8M[32] 14.8M[32]
uplink carrier frequency, downlinkFrequency
Frequency carrier frequency, determine
DL SystemtheBandwidth
frequency uplink system Bandwidth
UL System bandwidth. It
N_UL is the UlEARFCN, N_DL is the DlEARFCN, domain location and is used to determine the
double:[0..6000] double:[0..6000] model default: 5 model default: 5
and N_Offs-Ul is the offset and N_Offs-Dl is the offset resource allocation of frequency domain location
units: MHz units: MHz units: MHz units: MHz
corresponding to the corresponding to the downlink physical and resource allocation of
frequency band indicator. frequency band indicator. channels. uplink physical channels.
Effective when Cell Reset Effective when Cell Reset Effective when Cell Reset Effective when Cell Reset
M M -- --
910.0 955.0 10(50RB)[3] 10(50RB)[3]
1760.0 2160.0 20(100RB)[5] 20(100RB)[5]
1760.0 2160.0 20(100RB)[5] 20(100RB)[5]
2540.0 2660.0 20(100RB)[5] 20(100RB)[5]
2540.0 2660.0 20(100RB)[5] 20(100RB)[5]
1760.0 2160.0 20(100RB)[5] 20(100RB)[5]
1760.0 2160.0 20(100RB)[5] 20(100RB)[5]
910.0 955.0 10(50RB)[3] 10(50RB)[3]
2540.0 2660.0 20(100RB)[5] 20(100RB)[5]
2540.0 2660.0 20(100RB)[5] 20(100RB)[5]
910.0 955.0 10(50RB)[3] 10(50RB)[3]
50[23] Fixed
modes. Different
54[24] TM2/TM3/TM4/TM6
transmission modes need to
60[25] Inter-TransMode[30]
be configured for UEs in
64[26] Fixed TM2/TM3 Inter-
accordance with the
72[27] TransMode[31]
characteristics of the
75[28] enum: Fixed TM2/TM4 Inter-
channels of the UEs and
80[29] Auto-Adjusted[0] TransMode[32]
configurations of the
81[30]
maxUeRbNumUl maxUeRbNumDl 1[1]
cFI FixedflagSwiMode
TM3/TM9 Inter-
eNodeB and antennas. With
90[31] 2[2] TransMode[33]
Maximum RBs Allocated Maximum RBs Allocated The parameter indicates the the configuration of this
96[32] 3[3] Fixed TM4/TM9 Inter-
for Uplink UE for Downlink UE CFI Value configured by
CFI Selection parameter, the eNodeB
Switching Mode can
100[33] 4[4] TransMode[37]
high layer for cell. The CFI schedule downlink services
long:[1..100]
The parameter indicates the The parameter indicates the Value could be 1,2 ,3 or for UEs in the
model default: 33 model default: 100 model default: 2 model default: 3
Maximum RB number for Maximum RB number for could be configured as corresponding transmission
UE in Uplink configured by UE in Downlink configured auto-adjusted. mode, achieving optimal
high layer for cell . by high layer for cell . Effective when Cell Reset spectrum efficiency.
-- -- -- --
50[23] 50 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
50[23] 50 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
100[33] 100 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
50[23] 50 Auto-Adjusted[0] TM4 Intra-TransMode Adapt
schemes except multi-user
enum:
This parameter sets the For each UE, the ratio of MIMO and P_A is a
-6[0]
number of CRS antenna PDSCH EPRE to cell- parameter provided by
-4.77[1]
ports configured in the cell. specific RS EPRE among higher layers. Not
-3[2]
If this parameter is set to 1, PDSCH REs in all the necessarily valid in some
-1.77[3]
it indicates that the number OFDM symbols containing cases, e.g. QPSK with no
enum: 0[4]
PowerControlDLFDDLTE
of CRS ports in the cell is cell-specific RS is equal spatial multiplexing and
PowerControlDLFDDLTE
cellRSPortNum 0[0]
pb by Rho_B. 1[5]
_paForDTCH latitude
1. If this parameter is set to and is denoted without
Powermulti-user MIMO
Offset Between
1[1] 2[6]
2, it indicates
Number that the
of Tx Antenna The cell-specific ratio transmission
PDSCH andmode. The
Cell RS
enum: 2[2] 3[7]
number Portof CRS ports in the
in Cell Rho_B
Signal / Rho_A
Power Ratio is
(PB) parameter is corresponding
(P_A_DTCH) Latitude
1[0] 3[3]
cell is 2. If this parameter is according to cell-specific to the PDSCH data sourced
2[1] model default: 4 double:[-90..90]
set to 4, it indicates that the parameter P_B signalled by from DCCH logical
4[2] model default: 1 units: dB model default: -90.0
number of CRS ports in the higher layers and the channel and its assignment
cell is 4. number of configured eNB is through CCCH logical
Effective when Cell Reset cell specific antenna ports. channel. Latitude of Cell
M -- -- --
2[1] 0[0] 3[7] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 0[0] 3[7] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 1[1] -3[2] -90.0
2[1] 0[0] 3[7] -90.0
RACH_ROOT_SEQUENC
E, where
RACH_ROOT_SEQUENC
E is broadcasted as part of
the System Information.
Additional preamble
sequences, in case
PrachFDDLTE 64
Starting Mandatory in creation
longitude rootSequenceIndex
preambles cannotRoot
be cpMoId
Not mandatory in deletion cpId
Index of Logical
generated
Sequencefrom a single 64
to Generate root Should be unique in same Cell CP identification,
Longitude Zadoff-Chu sequence, are
Preamble ManagedElement
CP MOID valueCell
range:
CP[0..254].
ID
obtained from the root If the cell to be configured If configuring a super cell,
double:[-180..180] long:[0..837]
sequences with the is super cell, multiple multiple cell CP identities
model default: -180.0 model default: 0 string:length[0..500] string:length[0..500]
consecutive logical indexes values for different cp can be configured in the
until all the 64 sequences should separated with '&', same cell, separated by '&',
Longitude of cell are found. fill in example: 1&2. fill in example: 1&2.
-- -- M M
-180.0 628 1 1
-180.0 217 201 201
-180.0 655 203 203
-180.0 551 61 61
-180.0 475 63 63
-180.0 185 202 202
-180.0 336 222 222
-180.0 436 2 2
-180.0 295 62 62
-180.0 361 65 65
-180.0 726 3 3
Mergence mode 2 means
that more than one RFUs
are logically merged into a Only FDD needs to be
single RFU. The number of configured. This parameter
uplink antennas is the sum is the RRU carrier
of the antennas on all the frequency number, which is
RFUs, but the number of used to identify different
downlinkrfAppMode
antennas is not bpPoolFunctionId
It is consistent with the sectorFunctionId rruCarrierNo
carrier numbers in dual
RFU Application
accumulated.
Mode(Effective when Cell baseband function moId in carriers. The value range:
If a super cell is configured,
Reset) the BBU.
Baseband Function IfSector
the super cell is
Function [0..3].
RRU If Carrier
configuring
No a
the application mode of the If you configure a super configured, the CP of each super cell, multiple RRU
RF unit must be configured cell, each cell CP needs to cell needs to be configured carrier frequency numbers
string:length[0..500] string:length[0..500] string:length[0..500] string:length[0..500]
for each cell CP, which is configure the baseband with sector functions, can be configured in the
separated by&. Example: function, separated by a '&', separated by '&', fill in the same cell, separated by
0&0. example: 1&2. example: 1;2. '&',example: 0&0.
M M M --
1 BF_3 FDD1_73-70_8 0
0 BF_3 FDD12_190_66 1
0 BF_3 FDD13_190_66 1
0 BF_3 FDD14_190_7 0
0 BF_3 FDD15_190_7 0
0 BF_3 FDD17_191_66 1
0 BF_3 FDD19_191_66 1
1 BF_3 FDD2_71-74_8 0
0 BF_3 FDD18_191_7 0
0 BF_3 FDD21_191_7 0
1 BF_3 FDD3_75-72_8 0
value 0 represents the 8- element m of this array this
antenna mode in which up parameter is n (the value parameter
to eight antennas can be range of n is from 0 to 3), it is set to 1,
configured for a cell. The indicates that signals of the records
Whether to
enum:
value 1 represents the 4- CRS port n are transmitted of other
delete the
Unassociat
antenna mode in which up Range:[0..60]. on antenna channel m. If cells that
intra-UME
ed
isDelNbrA
to four antennas can be This parameter sets the the value of element m of use this
neighbor
cellMod cpSpeRefSigPwr maxCPTransPwr anttoPortMap deletion[0]
ndRelation
configured for a cell.MM maximum
Maximumtransmit power
Transmission this array parameter is 15, it cell asanda
Associatio
Cellcell do not use this
mode(Effective when Referenced Signal Power of that Power
can be of
used by a CP of
Baseband indicatesofthat
Mapping no CRS
Antenna Port neighbor
n
parameter.
Cell Reset) BPRange:[-60..50].
Resource (dBm) a cell.(dBm)
Resources signal is transmitted
and Antenna on
Channel cell are
relation
deletion[1]
If the cell to be configured If the cell to be configured If the cell to be configured antenna channel m. deleted.
model
is super cell, multiple is super cell, multiple is super cell, multiple If the cell to be configured This field
string:length[0..500] string:length[0..500] string:length[0..500] string:length[0..2500] default: 0
values for different cp values for different cp values for different cp is super cell, multiple is only
should separated with should separated with '&', should separated with '&', values for different cp valid for
'&',example: 0&0. fill in the example: 12&12. fill in the example: 12&12. should separated with '&' deletion.
-- -- -- -- --
1 15.2 46.0 0;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
1 15.2 46.0 0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 15;15;0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 15;15;0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 49.0 0;1;2;3;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 15;15;0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 0;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
1 15.2 46.0 0;1;2;3;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 15;15;0;1;15;15;15;15;15;15;15;15;15;15;15;15;15;15
1 15.2 46.0 0;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;1
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
5;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15;15
Result MODIND ManagedElementType SubNetwork
-- -- -- M
94967295;4294967295;429
4967295;4294967295;4294
967295;4294967295;42949
67295
example:
0;4294967295;4294967295
The indication of the
;4294967295;4294967295;
frequency band where the
4294967295;4294967295;4
urgencyeai tac mmModeSwch carrier bandIndicator
frequency is located
294967295;4294967295;42 enum:
EmergencyAlarm
Emergency alarm area
Area The parameter is used to is defined in 3GPP TS
94967295;4294967295;429 Close[0]
code. If the value is the
Code identify aTAC
tracking area The Switch of MM Mode 36.104.
bandIndicator
4967295;4294967295;4294 Open[1]
same as the value received within the scope of a The switch of MM mode, TDD value range: long:
967295;4294967295;42949 long:[0..65535]
from core network, the PLMN.The parameter is The Cell is MM mode [30..30],[33..64]
67295 model default: 0 model default: 0 long:[0..65535]
earthquake and tsunami used for UE location when FunctionMode of FDD value range:
message will be send to management.The parameter Baseband Board is MM long:[1..5],[7..14],[17..28],
UE. is configured by operator. mode. [31..31],[46..46],[101..101].
-- -- -- M
Absolute Radio Frequency Width'(bandWidth)can't be
Channel Number 1.4M, 3M. When the value
(EARFCN). The of 'Band Indication for
enum:
calculation formula is: Frequency' (bandIndicator)
1.4(6RB)[0]
F_DL = F_DL_low + 0.1 * is 34, the value of 'System
3(15RB)[1]
(N_DL - N_Offs-Dl), Band This parameter sets the
5(25RB)[2]
where, F_DL is the center Width'(bandWidth)can't be uplink-downlink subframe
10(50RB)[3]
carrierearfcn
frequency, 1.4M, 3M,bandWidth
20M. When the sfAssignment
configurations, including specialSfPatterns
15(75RB)[4]
F_DL_low
DownlinkisCenter
the DL lowest
Carrier value of 'Band Indication the uplink-downlink
Uplink-Downlink Subframe Special Subframe
20(100RB)[5]
carrier frequency,
FrequencyN_DL is for Frequency'
DL System Bandwidth conversion point of radio
Configuration Configuration
DlEARFCN, and N_Offs- (bandIndicator) is 44, the frames and whether a This parameter sets the
double:[0..6000] model default: 5 long:[0..6, 20] long:[0..9, 20]
Dl is the carrier frequency value of 'System Band subframe is an uplink time occupied by the
units: MHz units: MHz model default: 2 model default: 7
offset indicated by the band Width'(bandWidth)can't be subframe or a downlink DwPTS, GP, UpPTS in
indicator. 1.4M, 3M, 20M. subframe. special subframes.
Effective when Cell Reset Effective when Cell Reset Effective when Cell Reset Effective when Cell Reset
M -- -- --
schemes except multi-user
enum:
This parameter sets the For each UE, the ratio of MIMO and P_A is a
-6[0]
number of CRS antenna PDSCH EPRE to cell- parameter provided by
-4.77[1]
ports configured in the cell. specific RS EPRE among higher layers. Not
-3[2]
If this parameter is set to 1, PDSCH REs in all the necessarily valid in some
-1.77[3]
it indicates that the number OFDM symbols containing cases, e.g. QPSK with no
enum: 0[4]
PowerControlDLTDDLTE
of CRS ports in the cell is cell-specific RS is equal spatial multiplexing and
PowerControlDLTDDLTE
cellRSPortNum 0[0]
pb by Rho_B. 1[5]
_paForDTCH latitude
1. If this parameter is set to and is denoted without
Powermulti-user MIMO
Offset Between
1[1] 2[6]
2, it indicates
Number that the
of Tx Antenna The cell-specific ratio transmission
PDSCH andmode. The
Cell RS
enum: 2[2] 3[7]
number Portof CRS ports in the
in Cell Rho_B
Signal / Rho_A
Power Ratio is
(PB) parameter is corresponding
(P_A_DTCH) Latitude
1[0] 3[3]
cell is 2. If this parameter is according to cell-specific to the PDSCH data sourced
2[1] model default: 2 double:[-90..90]
set to 4, it indicates that the parameter P_B signalled by from DCCH logical
4[2] model default: 1 units: dB model default: -90.0
number of CRS ports in the higher layers and the channel and its assignment
cell is 4. number of configured eNB is through CCCH logical
Effective when Cell Reset cell specific antenna ports. channel. Latitude of Cell
M -- -- --
RACH_ROOT_SEQUENC
E, where
RACH_ROOT_SEQUENC
E is broadcasted as part of
the System Information.
Additional preamble
sequences, in case
PrachTDDLTE 64
Starting Mandatory in creation
longitude rootSequenceIndex
preambles cannotRoot
be cpMoId
Not mandatory in deletion cpId
Index of Logical
generated
Sequencefrom a single 64
to Generate root Should be unique in same Cell CP identification,
Longitude Zadoff-Chu sequence, are
Preamble ManagedElement
CP MOID value range:
cpId[0..254].
obtained from the root If the cell to be configured If configuring a super cell,
double:[-180..180] long:[0..837]
sequences with the is super cell, multiple multiple cell CP identities
model default: -180.0 model default: 0 string:length[0..500] string:length[0..500]
consecutive logical indexes values for different cp can be configured in the
until all the 64 sequences should separated with '&', same cell, separated by '&',
Longitude of cell are found. fill in example: 1&2. fill in example: 1&2.
-- -- M M
that multiple radio value 0 represents the 8-
frequency units are antenna mode in which up
logically combined into one to eight antennas can be
radio frequency unit, and configured for a cell. The
the number of antennas is value 1 represents the 4-
combined. Shared cell antenna mode in which up
mode means that multiple to four antennas can be
rfAppMode
radio frequency bpPoolFunctionId
units share It is consistent with the sectorFunctionId configured cellMod
for a cell.MM
the same cell.If a super cell baseband function moId in cell do not use this
is configured,
rfAppModethe the BBU.
bpPoolFunctionId sectorFunctionId parameter.
cellMod
application mode of the RF If you configure a super If you configure a super If the cell to be configured
unit must be configured for cell, each cell CP needs to cell, each cell CP needs to is super cell, multiple
string:length[0..500] string:length[0..500] string:length[0..500] string:length[0..500]
each cell CP, which is configure the baseband configure the sector values for different cp
separated by&. Example: function, separated by a '&', function, separated by a '&', should separated with
0&0. example: 1&2. fill in the example: 1;2. '&',example: 0&0.
M M M --
this
parameter
is set to 1,
the records
Whether to
enum:
of other
delete the
Unassociat
cells that
intra-UME
ed
isDelNbrA
use this
neighbor
cpSpeRefSigPwr deletion[0]
ndRelation
Unit: dBm, value range: [- cell as anda
Associatio
Referenced60..50].
Signal Power of neighbor
n
If BP
youResource
configure(dBm)
a super cell are
relation
deletion[1]
cell, you can configure deleted.
model
multiple cpSpeRefSigPwr This field
string:length[0..500] default: 0
in the same cell, separated is only
by '&', fill in the example: valid for
12&12. deletion.
-- --
Result MODIND ManagedElementType SubNetwork
-- -- -- --
Result MODIND ManagedElementType SubNetwork
Primary Key M -- M