Professional Documents
Culture Documents
Lab 08 Report EMI 02
Lab 08 Report EMI 02
EXPERIMENT NO 8
Lab Title:
Student Name: Reg. No:
Objective:
LAB ASSESSMENT:
Data presentation
Experimental results
Conclusion
Laboratory # 08
Sequencers
LAB TASKS:
Exercise 1:
System has a Push button LS1, when user press the LS1. (Implement using Sequencer)
1st time Fan goes ON
2nd time Bulb ON and Fan goes OFF
3rd time Bulb OFF
Exercise 2:
Write a program that will turn on (5)flashing lights one after another for 1 sec.
Exercise 3:
Using ladder logic: Use only one start stop station consisting of only one NC contact and one NO contact, two
motor starters and three control relays create the following cycle. (No timers or counters).
When the start button is pressed, motor 1 will start and run until stopped by pressing the stop button.
When the start button is pressed again motor 2 will run until stopped by pressing the stop button.
When the start button is pressed again motors 1 & 2 will run until stopped by pressing the stop button.
Pressing the start button again will now start the cycle over.
Exercise 4:
Write a program for two-way traffic signal.
Conclusion: