Professional Documents
Culture Documents
Exp 10 Hydrulic PLC
Exp 10 Hydrulic PLC
Part 1
1. Connect the Hydraulic circuit as shown in Figure 1.
- Start.
- Extend cylinder.
- Lamp1 ON.
- Delay 5 seconds.
- Retract cylinder.
- Lamp2 ON
- Delay2 seconds.
- Repeat 3 times.
- Stop.
Note: Use start pushbutton to operate the system, and press stop pushbutton to stop the
system in any time.
1
Part 2
3. Connect the Hydraulic circuit as shown in Figure 2 and the PLC
connection as shown in Figure 3.
- Start.
- Cylinder until reach the limit switch.
- Delay 3 seconds.
- Cylinder until reach the limit switch.
- Repeat. Until press stop push button.
- Lamp1 on when the counter read 5.
Note: Use start pushbutton to operate the system, and press stop pushbutton to stop the
system in any time.