Professional Documents
Culture Documents
02 Minerals Library Basic Objects 5p1s3a
02 Minerals Library Basic Objects 5p1s3a
02 Minerals Library Basic Objects 5p1s3a
Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Basic Objects
Reference Manual
Version 5.1/3a
CONTENT
1 SUMMARY...................................................................................................................5
2 COMMON DATA..........................................................................................................5
2.1 BASIC DESCRIPTION .......................................................................................5
2.2 CONTROL..........................................................................................................6
2.2.1 Library location......................................................................................6
2.2.2 Control modes .......................................................................................6
2.2.3 PCC, Interlock Bus (Process Control Connection)................................6
2.2.3.1 PCC Bus concept ..................................................................6
2.2.3.2 Basic Functions of PCC.........................................................6
2.2.3.3 PCC Interlock Parameter Description....................................7
2.2.4 Simulation Mode ...................................................................................8
2.3 OPERATION ......................................................................................................9
2.3.1 Properties..............................................................................................9
2.3.1.1 IndicationType .......................................................................9
2.3.1.2 EnableLimitLabel .................................................................10
2.3.1.3 NumberOfDigits ...................................................................10
2.3.1.4 EnableUnit ...........................................................................10
2.3.1.5 TextIndAbnormalPos / TextIndNormalPos ..........................10
2.3.1.6 Orientation ...........................................................................11
2.3.1.7 SymbolSize..........................................................................11
2.3.1.8 EnableFitToBestSize ...........................................................11
2.3.1.9 EnableLogicalColor .............................................................11
2.3.1.10 ValueColor...........................................................................11
3 AI Analogue Input.....................................................................................................12
3.1 BASIC DESCRIPTION .....................................................................................12
3.2 CONTROL........................................................................................................13
3.2.1 Parameter description .........................................................................13
3.2.1.1 Parameter AIS .....................................................................13
3.2.1.2 Parameter AIC.....................................................................14
3.2.2 Data Type description .........................................................................16
3.2.3 Project Constants ................................................................................18
3.3 OPERATION ....................................................................................................19
3.3.1 Graphic elements ................................................................................19
3.3.1.1 AISandUnit or AICandUnit...................................................20
3.3.1.2 AISTxt or AICTxt..................................................................22
3.3.1.3 AISBar or AICBar ................................................................24
3.3.2 Faceplate ............................................................................................27
3.3.2.1 Aspect Link Buttons.............................................................27
3.3.2.2 Default View ........................................................................27
3.3.2.3 Extended View.....................................................................28
3.3.3 Faceplate Control Permission .............................................................35
3.3.4 Alarm & Event List...............................................................................35
3.3.4.1 Object Status and Modes ....................................................35
3.3.4.2 Alarm Messages..................................................................36
4 AO Analogue Output................................................................................................38
4.1 BASIC DESCRIPTION .....................................................................................38
4.2 CONTROL........................................................................................................38
4.2.1 Parameter description .........................................................................38
4.2.1.1 Parameter AOS ...................................................................38
4.2.1.2 Parameter AOC ...................................................................39
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 2
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 4
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
1 SUMMARY
This document contains a detailed description of the following Basic Objects:
AI (Analog Input)
AO (Analog Output)
DI (Digital Input)
DO (Digital Output)
2 COMMON DATA
Basic Objects provide access and control for process IO-signals and calculated IO-signals
from the ABB System 800xA operator workplace.
All basic objects have the following common basic functions:
Tracking of control mode and status changes on the Operator station
Operator Station Interface (graphic element and faceplate) including detailed alarm
and interlock indications.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 5
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
2.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 6
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
cBMI.Std_Type: 0
Motor is not running, NC Valve is closed, NO Valve is Open, for PCC connected to
Group: if Group is not started
cBMI.Std_Type: 1
Same as Std_Type 0 but always alarm on all Objects if Group is started and
Consumer preselected. In case object is standby preselected alarm priority is
automatically reduced from Failure to Warning.
PCCAEListFrcEn = true
Automatic alarm disabling switched off. This option shall be used in cases a signal
has to alarm independent from the status of it’s parent.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 7
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
IntrlkType Description
Configuration Option
IA_Process_RFS Process interlock, group remains ready for start
Same functionality in Auto as described above.
IB_Equipment Equipment interlock
IB_Equipment_RFS Equipment interlock, group remains ready for start
IC_Safety Safety interlock
IC_Safety_RFS Safety interlock, group remains ready for start
Auto_Start Only used if consumer is in Auto mode: removes retained
IA interlock if it is not active anymore and thus the drive
will start (IO.In.IA also needs to be ok)
In case any of output objects (DOS and AOS) are connected to the
hardware all the changes to them will be written to the hardware.
For safety reason we advice to disconnect the Profibus, modulebus or any
other hardware interface.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 8
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
2.3 OPERATION
Details on all available graphic elements for the basic objects are available in the
operation chapter of the individual object type e.g. Analog Input.
2.3.1 Properties
Below is an overview of the properties that are applicable for the graphic elements that
represent basic objects.
2.3.1.1 IndicationType
Name DataType Default Value Description
IndicationType IndicationTypeEnum A03_MotorM Symbol type selection
Name Values
IndicationTypeEnum A00_Rectangle.
A01_Motor.
A03_MotorM.
A04_Pump.
A05_Fan.
A06_RotaryFeeder.
E77_BeltCleaner.
A02_Valve.
B11_Damper.
B14_LouvreDamper.
B16_PropRoller.
B15_AirslideDiverter.
B12_Shut.
B13_Diverter.
E21_GearwheelPump.
C31_Valve3way.
C32_ValveMan.
C33_ValveAuto.
E41_Generator.
E42_Switch.
E07_Triangle.
E08_Lollipop.
E09_Diamond.
E99_TagName.
F00_None.
With this property the type of graphic symbol that shall represent a DI or DO object can
be selected.
Not applicable for AI / AO objects.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 9
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
2.3.1.2 EnableLimitLabel
Name DataType Default Value Description
EnableLimitLabel Boolean True Show limit labels
When set to “True”, the alarm limits are visible next to the graphic element.
Only applicable for AI objects.
2.3.1.3 NumberOfDigits
Aspect: AISandUnit, AICandUnit, AOSandUnit, AOCandUnit
Name DataType Default Value Description
NumberOfDigits Integer 4 Number of presented digits
Used for setting how many digits need to be shown.
This is only applicable for AI / AO objects.
Not applicable for the bar graph.
2.3.1.4 EnableUnit
Aspect: AISandUnit, AICandUnit, AOSandUnit, AOCandUnit, PIDCtrl
Name DataType Default Value Description
EnableUnit Boolean True Show units
When set to “true”, the engineering units are visible next to the graphic element.
This is only applicable for AI / AO / PID objects.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 10
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
2.3.1.6 Orientation
Name DataType Default Value Description
Orientation Integer 0 Obsolete property used for migration
only, Orientation in degrees, clockwise.
Obsolete property used for migration only, Orientation in degrees, clockwise.
2.3.1.7 SymbolSize
Name DataType Default Value Description
SymbolSize Integer 12 Defined the square size in case of
IndicationType = 10
Size of the symbol in the graphic display.
E.g. Symbol size in pixel: 8 = Little
12 = Small
16 = Standard
20 = Large
24 = XXL
2.3.1.8 EnableFitToBestSize
Name DataType Default Value Description
EnableFitToBestSize Boolean True Set best unit size
When set to “True”, the unit size is calculated to best size according to the string.
Not applicable for the bar graph.
2.3.1.9 EnableLogicalColor
Name DataType Default Value Description
EnableLogicalColor Boolean True If EnableLogicalColor is true, then all
used colors are logical colors. The
logical color reference is equal to the
default logical color used in the color
properties. To use an individual color
set it to false.
When set to “True”, the colors are based on logical colors.
Not applicable for the PID object.
2.3.1.10 ValueColor
Name DataType Default Value Description
ValueColor Color BMIvalueMV Value color. Only applied if
(AI) EnableLogicalColor is set to false.
BMIvalueOUT
(AO)
When EnableLogicalColor set to “False”, the ValueColor is used to show the value color or
Bar color with the defined ValueColor.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 11
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3 AI Analogue Input
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 12
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 13
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
For more information on how to use Interlock Parameters, see chapter PCC Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 15
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 16
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
PanelLinkAIS; components
Name Data Attributes Initial Description
Type Value
1 Status dint Retain Object Status (Ready, H,HH,Phi,Plo etc.)
nosort
hidden
2 Cmd dint Retain Object Commands from Panel to Basic Object
nosort
hidden
3 SignalValue real Retain Signal Value to Process Panel
nosort
hidden
4 Blink bool Retain Enabling of Basic Object Blinking
nosort
hidden
Cmd; Bits
Name Bit
Position
1 AlarmAck 0
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 17
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
FDStatusNC defines the Value that is used to detect that no Status is connected to the
Module. Note that this Value should be “impossible” to be sent at any time by a Field
Device.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 18
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 19
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.1.1 Presentation
Indication Type Description Example
3.3.1.1.2 Status
Object status Symbol color
3.3.1.1.3 Labels
Description Indication
Signal blocked
Limit High 2
Limit High 1
Limit Low 1
Limit Low 2
Rate of Change
Example:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 20
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.1.4 Properties
Name DataType Default Value Description
EnableDisplayBackgroundColor Boolean False Show display background color as
symbol background
EnableFitToBestSize Boolean True Set best unit size
EnableLimitLabel Boolean True Show limit labels
EnableLogicalColor Boolean True If EnableLogicalColor is true, then all
used colors are logical colors. The
logical color reference is equal to the
default logical color used in the color
properties. To use an individual color
set it to false.
EnableUnit Boolean True Show units
NumberOfDigits Integer 4 Number of presented digits
UnitSize Integer 8 Unit size in pixel: 7 = Small, 8 =
Standard, 10 = Large, 12= XXL
ValueColor Color BMIvalueMV Value color. Only applied if
EnableLogicalColor is set to false.
ValueSize Integer 12 Value size in pixel: 8 = Small, 10
Medium, 12 = Standard, 14 = Large,
16 = XXL
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 21
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.2.1 Presentation
Indication Type Description Example
3.3.1.2.2 Status
Object status Symbol color
Normal Position for
Appearance Types, 0 = Alarm, 2 Gray dimmed (semitransparent)
= value
Normal Position for
Appearance Types, 10 = Alarm, Green
12 = Value interlock
Normal Position for
Appearance Types, 0 = Alarm, 2 Red
= value
3.3.1.2.3 Labels
Description Indication
Status blocked
Example:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 22
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.2.4 Properties
Name DataType Default Value Description
AppearanceType Integer 0 0 = Alarm, 2 = Value, 3 = Value custom
color, 10 = Alarm interlock, 12 Value
interlock
ColorAbnormalPos Color Lime Used for AppearanceType 3 = Value
custom color
ColorNormalPos Color RGB(159,159,159) Used for AppearanceType 3 = Value
custom color
EnableFont Boolean False Enable the Font property
EnableLogicalColor Boolean True To use an individual color set it to false
EnableNormalPos Boolean True Hide symbol in normal position
Font Font Font( "Arial" ,10 Text font wehn EnableFont is true
,Regular, Bold)
IndicationType Integer 0 0 = Text with background color, 10 =
Square in front of text, 20 = Text colored
IndicationValue Integer 1 0 = All, 1 = H2, 2 = H1, 3 = PH2, 4 = PH1,
5 = PL1, 6 = PL2, 7 = L1, 8 = PL2
NormalPos Boolean False Used for AppearanceType 2 = Value, 3 =
Value custom color
SymbolSize Integer 12 Symbol size in pixel: Little = 8, Small = 12,
Standard = 14, Large = 18, XXL = 22
TextBold Boolean True Text style is bold
TextColor Color BMIstaticTextOff Text color
TextIndTrH1AbnormalPos String "H1" TextIndTrH1AbnormalPos
TextIndTrH1NormalPos String "H1" TextIndTrH1NormalPos
TextIndTrH2AbnormalPos String "H2" TextIndTrH2AbnormalPos
TextIndTrH2NormalPos String "H2" TextIndTrH2NormalPos
TextIndTrL1AbnormalPos String "L1" TextIndTrL1AbnormalPos
TextIndTrL1NormalPos String "L1" TextIndTrL1NormalPos
TextIndTrL2AbnormalPos String "L2" TextIndTrL2AbnormalPos
TextIndTrL2NormalPos String "L2" TextIndTrL2NormalPos
TextIndTrPH1AbnormalPos String "PH1" TextIndTrPH1AbnormalPos
TextIndTrPH1NormalPos String "PH1" TextIndTrPH1NormalPos
TextIndTrPH2AbnormalPos String "PH2" TextIndTrPH2AbnormalPos
TextIndTrPH2NormalPos String "PH2" TextIndTrPH2NormalPos
TextIndTrPL1AbnormalPos String "PL1" TextIndTrPL1AbnormalPos
TextIndTrPL1NormalPos String "PL1" TextIndTrPL1NormalPos
TextIndTrPL2AbnormalPos String "PL2" TextIndTrPL2AbnormalPos
TextIndTrPL2NormalPos String "PL2" TextIndTrPL2NormalPos
TextSize Integer 10 Text size in pixel: 8 = Small, 10 =
Standard, 12 = Large, 16 = XXL
TextSource Integer 1 0 = None, 1 = TextIndAbnormalPos /
TextIndNormalPos, 2 = OPC Text, 3 =
NLS Text
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 23
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.3.1 Presentation
Appearance Description Example
Standard
This is the standard appearance of the bar graph. The value will
0 be indicated in relation to the maximum and minimum range. The
green bar will always start from the minimum range.
Inverse
2 The bar will be inverse to the standard appearance.
Line
3 The value will be indicated as a small line instead of a bar.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 24
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.3.2 Status
Example Object status Symbol color
3.3.1.3.3 Labels
Description Indication
Signal blocked
Limit High 2
Limit High 1
Limit Low 1
Limit Low 2
Example:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 25
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.1.3.4 Properties
Name DataType Default Value Description
Appearance Integer 0 0 = Standard, 1 = Start from Pivot, 2 = Inverse,
3 = Line
BarColorCustom Color BMIbarMV Bar color. Only applied if EnableLogicalColor is
set to false.
EnableLimitLabel Boolean True Show limit labels
EnableLogicalColor Boolean True If EnableLogicalColor is true, then all used
colors are logical colors. The logical color
reference is equal to the default logical color
used in the color properties. To use an
individual color set it to false.
EnableManualRange Boolean False If set to true, the bar's range can be set
manually
Pivot Real 0. Used together with Appearance = 1 (Start from
Pivot). The bar will start from the value set as
Pivot.
RangeMax Real 100. Maximum range if EnableManualRange is true
RangeMin Real 0. Minimum range if EnableManualRange is true
SubscriptionRate Integer 0 The update rate for all aspect object properties
subscribed for
SymbolSize Integer 14 Symbol size in pixel: Little = 8, Small = 12,
Standard = 14, Large = 18, XXL = 22
VerticalBar Boolean True VerticalBar: True = vertical appearance, false =
horizontal appearance.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 26
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.2 Faceplate
Event List
Operators Note
Tagname
&
Description
Measured Value
&
alarm indication
Mini Trend
Measure Value
Graphical Bar
Measured Value
&
alarm limits
Apply Button
Extended View
for detailed
information and
settings
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 27
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Reduced View
default
Additional information for the AIS is structured in tabs. The available tabs and a short
description of the contained information are shown below.
Tab Description
Trend Mini trend of filtered measured value, IO value and rate of change
Limit Limits and alarm delay settings for the measured value
ROC Rate of change settings
Block - Input Blocking
- Alarm Blocking
MVStatus Sub status for DP, PA and FF Field Devices
PCC - PCC interlock configuration summery
- Link to connected consumer or consumer overview list
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 28
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.2.3.1 Trend
On-Line single Triple trend and log Configuration aspect with the actual values: Signal,
FilterdSignal and RateofChange.
Move over the trend area a curser will appear, showing enabled traces’ value and record
time.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 29
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Reference Table
Description
B Indication that the corresponding alarm limit has been blocked. Yellow
means that the alarm limit is blocked (disabled)
H2 2nd High limit (H2) - Failure
H1 1st High limit (H1) - Warning
PHigh Process High Limit
PLow Process Low Limit
L1 1st Low limit (L1) - Warning
L2 2nd Low limit (L2) - Failure
Alarm Delay Time delay before alarm message will be send to the operator station.
Check below the special mode for 6 alarm limits.
Hysteresis Alarm Hysteresis in %
When limits are changed from the faceplate, you must take into consideration that
these values will be overwritten again with the initial values when a cold restart /
reset is performed and the coldretain files are not available for the corresponding
controller.
To avoid this, you need to update the initial values for the corresponding AIS/AIC
control module instance with Control Builder, after changing the Values from the
Faceplate.
There is a possibility to enable individual alarm delays for each AIS/AIC element. The
way to do that is setting EnIndividualAlarmDelays parameter to true in each AIS/AIC
element.
After a download, you will be able to notice the following appearance of the AIS
faceplate
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 30
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.2.3.3 ROC
Description
ROC High Limit Rate Of Change in % of Total Range per seconds High Limit
ROC Hysteresis ROC Alarm Hysteresis in %
Filter Time Filter time to be applied to the IO.<AISTag>.FilteredValue
When limits are changed from the faceplate, you must take into consideration that
these values will be overwritten again with the initial values when a cold restart /
reset is performed and the coldretain files are not available for the corresponding
controller.
To avoid this, you need to update the initial values for the corresponding AIS/AIC
control module instance with Control Builder, after changing the Values from the
Faceplate.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 31
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Block Alarm
3.3.2.3.5 MVStatus
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 32
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
All Substatus for DP, PA and FF Field Devices will generate error control when quality is
Bad or Uncertain for AIS Control Module.
An Aspect Link giving access to the “Device Management” Object can be configured via
the “BMI DTM Link” General Properties Aspect.
Description
Signal Error Time between the Signal Error occurs until the Value is forced to
Delay ErrValue. Only available for AIS Module.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 33
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
3.3.2.3.6 PCC
PCC interlock configuration
The PCC interlock configuration tab shows the actual configuration and a link to the
parent object. For explanation of the different configuration options see chapter PCC
Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 34
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Note that forcing to a Value in the Faceplate does require Write permission for
IO.Signal.Value and IO.Signal.Forced, these are not set on IntPar Variables.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 35
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
The OLD VALUE and NEW VALUE correspond exactly to the old and new value of the
limit.
The next case is when some limit is blocked from the faceplate. In this case the structure
for the event message is the following.
Limit Blk: + [LIMIT NAME]
[LIMIT NAME] Description
MV_L1 Low limit 1 is blocked
MV_L2 Low limit 2 is blocked
MV_H1 High limit 1 is blocked
MV_H2 High limit 2 is blocked
MV_PHi Process limit high is blocked
MV_PLo Process limit low is blocked
The 3rd and last case of our possible event messages in AIS and AIC is when we have a
forced condition for the MV value. In this case three types of messages are possible:
When the Forced flag is selected the message is:
FRC Value: [VALUE]
Where value is the actual value set for the MV value:
When the Forced selection is undone the message is:
FRC Deselected
Or when MV value is changed under forced condition, the message is:
FRC Value: [OLD VALUE] -> [NEW VALUE]
Notice that Process Limit (Plim) does not create any alarm. The maximum indication
treatment for the Process Limit is 0 (event) as described in the parameter description,
in Control Builder.
For the alarm limits (Limits H2, L2, H1 and L1) the message will always be:
[LIMIT TYPE]: [LIMIT VALUE]
[LIMIT TYPE] Description
L1 Low limit 1 is reached
L2 Low limit 2 is reached
H1 High limit 1 is reached
H2 High limit 2 is reached
PHi Process limit high is reached
PLo Process limit low is reached
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 36
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Limit Value is the number defined over the Lim1 and Lim2 Tab for each Limit Type.
ROC is the rate of change for the MV values in a normal scale (0-100% of the total range).
It will create an alarm after the rate of change in seconds for the MV value is higher then
the one defined in the faceplate over the Lim2 tab.
When a ROC appears, the following message is shown in the alarm list:
ROC [ROC HIGH LIMIT]
Where the ROC HIGH LIMIT is the value set over Lim2 faceplate tab.
The signal error alarm is created every time a hardware failure which that analog input is
connected is encountered. If the configured Signal Error Delay Time is bigger than 0
seconds, a warning alarm will be sent immediately. The message for both, the warning
and the alarm, is defined as:
SigErr
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 37
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4 AO Analogue Output
4.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 38
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 39
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
PanelLinkAOS; components
Name Data Attributes Initial Description
Type Value
1 Status dint Retain Object Status (NoError, SignalErr)
nosort
hidden
2 Cmd dint Retain Object Commands from Panel to Basic Object
nosort
hidden
3 ManOut real Coldretain Manual Output Signal from Process Panel to
nosort Basic Object
hidden
4 EnManOutFld bool Retain Enabling of Input Field (Manual Output)
nosort
hidden
Status; Bits
Name Bit
Position
1 NoError 0
2 SignalErr 1
Cmd; Bits
Name Bit
Position
1 Auto 0
2 Man 1
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 40
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 41
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.1.1.1 Presentation
Indication Type Description Example
Value indication.
Value and Unit Used in Graphic Displays.
4.3.1.1.2 Status
Object status Symbol color
4.3.1.1.3 Labels
Description Indication
Mode auto No indication of the default mode
Mode manual
Examples:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 42
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.1.1.4 Properties
Name DataType Default Value Description
EnableBackAppearance Boolean False Switch on the value and unit back
appearance
EnableFitToBestSize Boolean True Set best unit size
EnableLogicalColor Boolean True If EnableLogicalColor is true, then all
used colors are logical colors. The
logical color reference is equal to the
default logical color used in the color
properties. To use an individual color
set it to false.
EnableModeManualLabel Boolean True Show mode manual label
EnableUnit Boolean True Show units
NumberOfDigits Integer 4 Number of presented digits
UnitSize Integer 8 Unit size in pixel: 7 = Small, 8 =
Standard, 10 = Large, 12= XXL
ValueColor Color BMIvalueOUT Value color. Only applied if
EnableLogicalColor is set to false.
ValueSize Integer 12 Value size in pixel: 8 = Small, 10
Medium, 12 = Standard, 14 = Large,
16 = XXL
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 43
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.1.2.1 Presentation
Appearance Description Example
Standard
This is the standard appearance of the bar graph. The value will
0 be indicated in relation to the maximum and minimum range. The
green bar will always start from the minimum range.
Inverse
2 The bar will be inverse to the standard appearance.
Line
3 The value will be indicated as a small line instead of a bar.
4.3.1.2.2 Status
Example Object status Symbol color
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 44
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.1.2.3 Labels
Description Indication
Output Signal is Blocked /
Forced
Mode manual
Example:
4.3.1.2.4 Properties
Name DataType Default Value Description
Appearance Integer 0 0 = Standard, 1 = Start from Pivot, 2 =
Inverse, 3 = Line
BarColorCustom Color BMIbarOUT Bar color. Only applied if
EnableLogicalColor is set to false.
EnableLogicalColor Boolean True If EnableLogicalColor is true, then all used
colors are logical colors. The logical color
reference is equal to the default logical
color used in the color properties. To use
an individual color set it to false.
EnableManualRange Boolean False If set to true, the bar's range can be set
manually
EnableModeManualLabel Boolean True Show mode manual label
Pivot Real 0. Used together with Appearance = 1 (Start
from Pivot). The bar will start from the
value set as pivot.
RangeMax Real 100. Maximum range if EnableManualRange is
true
RangeMin Real 0. Minimum range if EnableManualRange is
true
SubscriptionRate Integer 0 The update rate for all aspect object
properties subscribed for
SymbolSize Integer 14 Symbol size in pixel: Little = 8, Small = 12,
Standard = 14, Large = 18, XXL = 22
VerticalBar Boolean True VerticalBar: True = vertical appearance,
false = horizontal appearance
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 45
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.1.3.1 Presentation
IndicationType Example
1
4.3.1.3.2 Status
Status Example
Ready
Disabled
Action in Progress
(Feedback active)
4.3.1.3.3 Properties
Name DataType Default Value Description
Action Action Direct Controls the action type, i.e. whether the button
has direct or applied (two step oparation) action.
ButtonType Integer 0 0 = Increase, 1 = Decrease
IndicationType Integer 1 1 = Arrow, 2 = OpenArrow, 3 = StealthArrow, 4 =
Diamond, 5 = Rectangle, 6 = Oval, 7 = Line, 8 =
Triangle
SubscriptionRate Integer 0 The update rate for all aspect object properties
subscribed for
SymbolOrientation Real 0. Orientation in degree, clockwise
SymbolSize Integer 12 Symbol size in pixel: Little = 8, Small = 12,
Standard = 14, Large = 18, XXL = 22
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 46
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.2 Faceplate
Event List
Single Trend
Operators Note
Tagname
&
Description
Operation Mode
indication
Output Value
indication Mini Trend
Output Value
Graphical Bar
Output value and
limits
Extended View
for detailed
information and
settings
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 47
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Auto Mode
Operation Mode Auto: output value (OUT) written from the application. The value of
the AOS/AOC actually corresponds to the output value.
Manual Mode
Operation Mode Man: output value (OUT) entered from the faceplate. The value of the
AOS/AOC corresponds to the output value. The Auto value indicates the actual value
coming from the application.
The last entered value in Man mode will be preserved during a cold restart.
Furthermore, the faceplate extended view gives more detailed information about the
Analog Output, such as:
Tab Description
Trend Mini trend of output value, IO value and auto value
Limit Limits for output value
Block - Output Blocking
- Alarm Blocking
IOStatus Sub status for IO and FF Field Devices
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 48
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
4.3.2.3.1 Trend
On-Line trend with actual output value and auto value.
Move over the trend area a curser will appear, showing enabled traces’ value and record
time.
Description
Window
Max Increase The Direct Entry Window’s high limit is set to the current Value plus the
Value given here
Max Decrease The Direct Entry Window’s low limit is set to the current Value minus the
Value given here
4.3.2.3.3 Override
The IO value (process output value) indicates the “frozen” output value before forcing.
The Auto value indicates the actual value coming from the application.
4.3.2.3.4 IOStatus
All Sub-statuses for IO Devices in Quality Bad or Uncertain will be indicated as Signal
Error in the Faceplate.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 50
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
An Aspect Link giving access to the “Device Management” Object can be configured via
the “BMI DTM Link” General Properties Aspect. See AIS MVStatus for details.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 51
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Note that forcing to a Value in the Faceplate does require Write permission for
IO.Signal.IOValue and IO.Signal.Forced, these are not set on IntPar Variables.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 52
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 53
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5 DI Digital Input
5.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 54
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
For more information on how to use Interlock Parameters, see chapter PCC Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 55
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
For more information on how to use Interlock Parameters, see chapter PCC Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 56
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
PanelLinkDIS; components
Name Data Attributes Initial Description
Type Value
1 Status dint Retain Object Status (Ready,Event, Warning etc.)
nosort
hidden
2 Cmd dint Retain Object Commands from Panel to Basic Object
nosort
hidden
3 SignalValue bool Retain Signal Value to Process Panel
nosort
hidden
4 Blink bool Retain Enabling of Basic Object Blinking
nosort
hidden
Cmd; Bits
Name Bit
Position
1 AlarmAck 0
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 57
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 58
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 59
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.2.1.1 Presentation
Indication Type Example
A00_Rectangle
A01_Motor
A02_Valve
A03_MotorM
A04_Pump
A05_Fan
A06_RotaryFeeder
B11_Damper
B12_Shut
B13_Diverter
B14_LouvreDamper
B15_AirslideDiverter
B16_PropRoller
C31_Valve3way
C32_ValveMan
C33_ValveAuto
E07_Triangle
E08_Lollipop
E09_Diamond
E21_GearwheelPump
E41_Generator
E42_Switch
E77_BeltCleaner
E99_TagName
F00_None
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 60
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.2.1.2 Status
Object status Symbol color
OFF Grey
ON Green
5.3.2.1.3 Labels
Description Indication
Status blocked
Example:
5.3.2.1.4 Properties
Name DataType Default Value Description
IndicationType IndicationTypeEnum A00_Rectangle Symbol type selection
Inverse Boolean False Inverse indication of on/ off status
MirrorPosition Boolean False Mirrors position left / right and open / close
indication
Orientation Integer 0 Rotate symbol clockwise 0 - 360 °
SensorText String "X" Sensor text if IndicationType = E08_Lollipop
SymbolSize Integer 16 8 = Litle, 12 = Small, 16 = Standard, 20 =
Large, 24 = XXL
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 61
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.2.2.1 Presentation
Indication Type Example
Text colored
5.3.2.2.2 Status
Object status Symbol color
Normal Position for
Appearance Types, 0 = Alarm, 2 Gray dimmed (semitransparent)
= value
Normal Position for
Appearance Types, 10 = Alarm, Green
12 = Value interlock
5.3.2.2.3 Labels
Description Indication
Status blocked
Example:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 62
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.2.2.4 Properties
Name DataType Default Value Description
AppearanceType Integer 0 0 = Alarm, 2 = Value, 3 = Value custom color,
10 = Alarm interlock, 12 Value interlock
ColorAbnormalPos Color Lime Used for AppearanceType 3 = Value custom
color
ColorNormalPos Color RGB(159,159,159) Used for AppearanceType 3 = Value custom
color
EnableFont Boolean False Enable the Font property
EnableLogicalColor Boolean True To use an individual color set it to false
EnableNormalPos Boolean True If false, symbol and text are not visible in
NormalPos.
Font Font Font( "Arial" ,10 Text font when EnableFont is true
,Regular, Bold)
IndicationType Integer 0 0 = Text with background color, 10 = Square in
front of text, 20 = Text colored
NormalPos Boolean False Used for AppearanceType 2 = Value, 3 = Value
custom color, 12 = Value Interlock
SubscriptionRate Integer 0 The update rate for all aspect object properties
subscribed for
SymbolSize Integer 12 Defined the square size in case of
IndicationType = 10
TextBold Boolean True Text style is bold
TextIndAbnormalPos String "On" Text for abnormal position
TextIndNormalPos String "Off" Text for normal position
TextSize Integer 10 Text size in pixel: 8 = Small, 10 = Standard, 12
= Large, 16 = XXL
TextSource Integer 1 0 = None, 1 = TextIndAbnormalPos /
TextIndNormalPos, 2 = OPC Text, 3 = NLS Text
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 63
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.3 Faceplate
Event List
Operators Note
Tagname
&
Description
Alarm or Event
Message Text
Extended View
for detailed
information and
settings
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 64
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
The faceplate extended view gives more detailed information about the Digital Input,
such as:
Tab Description
Trend Mini trend of output value and value from process (DIS) or application
(DIC)
Parameter Alarm, Warning and Ready Delay
Block - Input Blocking
- Alarm Blocking
PCC - PCC interlock configuration summery
- Link to connected consumer or consumer overview list
5.3.3.3.1 Trend
On-Line trend with actual input value.
Move over the trend area a curser will appear, showing enabled traces’ value and record
time.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 65
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.3.3.2 Parameters
Setting of Alarm, Warning and Ready Delay
Block Alarm
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 66
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
5.3.3.3.4 PCC
PCC interlock configuration:
The PCC interlock configuration tab shows the actual configuration and a link to the
parent object. For explanation of the different configuration options see chapter PCC
Interlock Parameter Description.
Note that forcing to a Value in the Faceplate does require Write permission for
IO.SigHW.Value and IO.SigHW.Forced, these are not set on IntPar Variables.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 67
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 68
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6 DO Digital Output
6.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 69
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
PanelLinkDOS; components
Name Data Attributes Initial Description
Type Value
1 Cmd dint Retain Object Commands from Panel to Basic Object
nosort
hidden
2 SignalValue bool Retain Signal Value to Process Panel
nosort
hidden
3 ConEn bool Retain Enabling of Control
nosort
hidden
Cmd; Bits
Name Bit
Position
1 On 0
2 Off 1
3 Auto 2
4 Man 3
5 AlarmAck 4
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 70
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 71
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.1.1 Presentation
Indication Type Example
A00_Rectangle
A01_Motor
A02_Valve
A03_MotorM
A04_Pump
A05_Fan
A06_RotaryFeeder
B11_Damper
B12_Shut
B13_Diverter
B14_LouvreDamper
B15_AirslideDiverter
B16_PropRoller
C31_Valve3way
C32_ValveMan
C33_ValveAuto
E07_Triangle
E08_Lollipop
E09_Diamond
E21_GearwheelPump
E41_Generator
E42_Switch
E77_BeltCleaner
E99_TagName
F00_None
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 72
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.1.2 Status
Object status Symbol color
OFF Grey
ON Green
6.3.1.1.3 Labels
Description Indication
Status blocked
Mode auto
No indication of the default mode
Mode manual
Example:
6.3.1.1.4 Properties
Name DataType Default Value Description
EnableModeManualLabel Boolean True Show mode manual label
EnableObjectStatusColor Boolean False If set to false, the status color
depends on the indication type, else
the logical DO colors are used.
IndicationType IndicationTypeEnum A00_Rectangle Symbol type selection
Inverse Boolean False Inverse indication of on/ off status
MirrorPosition Boolean False Mirrors position left / right and open /
close indication
Orientation Integer 0 Orientation
SymbolSize Integer 16 SymbolSize
For common settings and symbol logical colors please refer to [1] Minerals Library
Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 73
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.2.1 Presentation
Indication Type Example
Text colored
6.3.1.2.2 Status
Object status Symbol color
Normal Position
(Appearance Type: Value Green
interlock)
6.3.1.2.3 Labels
Description Indication
Status blocked
Example:
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 74
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.2.4 Properties
Name DataType Default Value Description
AppearanceType Integer 0 2 = Value, 3 = Value custom color, 12
Value interlock
ColorAbnormalPos Color Lime Used for AppearanceType 3 = Value
custom color
ColorNormalPos Color RGB(159,159,159) Used for AppearanceType 3 = Value
custom color
EnableFont Boolean False Enable the Font property
EnableLogicalColor Boolean True To use an individual color set it to false
EnableModeManualLabel Boolean True Show mode manual label
EnableNormalPos Boolean True Hide symbol in normal position
Font Font Font( "Arial" ,10 Text font when EnableFont is true
,Regular, Bold)
IndicationType Integer 0 0 = Text with background color, 10 =
Square in front of text, 20 = Text colored
NormalPos Boolean False Used for AppearanceType 2 = Value, 3
= Value custom color
SubscriptionRate Integer 0 The update rate for all aspect object
properties subscribed for
SymbolSize Integer 12 Defined the square size in case of
IndicationType = 10
TextBold Boolean True Text style is bold
TextIndAbnormalPos String "On" Text for abnormal position
TextIndNormalPos String "Off" Text for normal position
TextSize Integer 10 Text size in pixel: 8 = Small, 10 =
Standard, 12 = Large, 16 = XXL
TextSource Integer 1 0 = None, 1 = TextIndAbnormalPos /
TextIndNormalPos, 2 = OPC Text, 3 =
NLS Text
For common settings please refer to [1] Minerals Library Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 75
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.3.1 Presentation
Indication Type Description Example
6.3.1.3.2 Status
Object status Symbol color
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 76
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.1.3.3 Properties
Name DataType Default Value Description
Action Action SystemDefault Controls the action type, i.e.
whether the button has direct or
applied (two step oparation)
action. Used only for ButtonType
= 0 (toggle) and ButtonType = 1
(single pulse)
ButtonType Integer 0 0 = toggle, 1 = single pulse, 2 =
while down: set signal, 3 = while
down: alternate, 4 = set signal, 5
= reset signal
EnableColorBar Boolean True If true the colored bar on top of
the button is presented.
EnableObjectStatusColor Boolean False If set to false, the status color
depends on the indication type,
else the logical DO colors are
used.
EnableStoreMode Boolean True After an action the original mode
will be restored
EnableSymbol Boolean True Show button with symbol
EnableWriteWhenAuto Boolean True If true, the button is enabled in
manual and auto mode
FeedBackSignal Boolean False If property FeedBackType = 1
then this property is used as the
feed back signal
FeedBackType Integer 0 0 = DO value, 1 = feedback
signal
IndicationType IndicationTypeEnum A00_Rectangle Symbol type selection
PulseTime Integer 1 Pulse time in seconds
SymbolPos Integer 5 1 = top left, 2 = top center, 3 =
top right, 4 = center left, 5 =
center center, 6 = center right, 7
= bottom left, 8 = bottom center,
9 = bottom right
SymbolSize Integer 10 8 = small, 10 = standard, 12 =
large, 14 = XXL
Text String "Text" Description text
TextAlign Integer 5 1 = top left, 2 = top center, 3 =
top right, 4 = center left, 5 =
center center, 6 = center right, 7
= bottom left, 8 = bottom center,
9 = bottom right
TextBold Boolean True Enable text style bold
TextSize Integer 10 8 = small, 10 = standard, 12 =
large, 14 = XXL
TextSource Integer 0 0 = None, 1 = Manual, 2 = OPC,
3 = NLS
For common settings and Symbol Logical colors please refer to [1] Minerals Library
Overview (3BHS 161555).
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 77
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.2 Faceplate
Event List
Operators Note
Tagname
&
Description
Operation Mode
indication
Extended View
for detailed
information and
settings
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 78
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
AUTO Mode
MAN Mode
Operation Mode Man: Output controlled from the faceplate via the buttons ON and
OFF. The Auto value indicates the actual value coming from the application.
The last entered value in Man mode will be preserved during a cold restart.
Furthermore, the faceplate extended view gives more detailed information about the
Digital Output, such as:
Tab Description
Trend Mini trend of output value and value from process (DOS) or application
(DOC)
Block Output Blocking
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 79
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
6.3.2.3.1 Trend
On-Line trend with actual output value and IO value.
Move over the trend area a curser will appear, showing enabled traces’ value and record
time.
6.3.2.3.2 Override
The IO value (process output value) indicates the “frozen” output value before forcing.
The Auto value indicates the actual value coming from the application.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 80
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Note that forcing to a Value in the Faceplate does require Write permission for
IO.SigHW.IOValue and IO.SigHW.Forced, these are not set on IntPar Variables.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 81
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
[MODE] + [VALUE]
[MODE] Description
Aut Auto Mode
Man Manual Mode
And the value can be true or false depending on its status during the mode change
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 82
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
7 PCC_Connect_2
7.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 83
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 84
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
7.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 85
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
8 PCC_Connect
8.2 CONTROL
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 86
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Project Constants are used to ease the reading of the most common configurations
Constant Name Value Description
Transparent 511 / 16#1FF All defined interlocks on the signal are
forwarded to the consumer
NoInterlockForwarding 0 / 16#0 Regardless of the configuration on the signal
no interlock is forwarded to the consumer
NoPCCForwarding 512 / 16#200 Alarm and interlock forwarding to the
consumer is disabled all together
DI_Alarm 1 / 16#001 Only interlock for DIS alarm is forwarded
DI_Warning 2 / 16#002 Only interlock for DIS warning is forwarded
AI_PID_H2 1 / 16#001 Only interlock for AIS/PID H2 limit is forwarded
AI_PID_H1 2 / 16#002 Only interlock for AIS/PID H1 limit is forwarded
AI_PID_L1 16 / 16#010 Only interlock for AIS/PID L1 limit is forwarded
Custom masks can be created in the project library if desired. The added up values of the
actions to be forwarded shall be defined as dword in hex format.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 87
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 88
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
8.3 OPERATION
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 89
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
9 PCC_Threshold_AND3
CondA1
CondB1
CondC1
CondA2
CondB2
CondC2
CondA3
CondB3
CondC3
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 90
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
9.2 CONTROL
For more information on how to use Interlock Parameters, see chapter PCC Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 91
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 92
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
9.3 OPERATION
9.3.1 Faceplate
Operators Note
AND
sub condition status
Threshold
main condition status
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 93
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
CondA1 ok Green
DriveCond ok Green
CondA2 not ok Gray
Ok
CondA1 not ok (B) Green
As long the condition Green
CondA2 not ok Gray
is blocked
CondA1 ok Green
DriveCond ok Green
CondB1 ok Green
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 94
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
9.3.1.2.1 Parameters
On/Off delay settings for the interlock output.
Reference Table
Description
On Delay Time On Delay for interlock output
Off Delay Time Off Delay for interlock output
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 95
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
9.3.1.2.2 PCC
PCC interlock configuration
The PCC interlock configuration tab shows the actual configuration and a link to the
parent object. For explanation of the different configuration options see chapter PCC
Interlock Parameter Description.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 96
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
In the following example air slide 591-AS2.M1 and distribution gate 591-DG1.M1 on
position to silo 1 or air slide 591-AS3.M1 and distribution gate 591-DG1.M1 on position to
silo 2 / 3 or air slide 591-AS2.M1 and air slide 591-AS3.M1 must be running for the air
slide 591-AS1.M1 to start/run.
In this example the interlock condition is not ok.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 97
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Copyright 2002 ABB. All rights reserved.
Doc. kind Reference Manual Project Minerals Library, CoE Cement and Minerals
Title Basic Objects
800xA Minerals Library version 5.1/3a
Document number Lang. Rev. ind. Pages 98
ABB Switzerland Ltd 3BHS 161556 en P No. of p. 98