Professional Documents
Culture Documents
Dongora Kebado
Dongora Kebado
Dongora Kebado
Created by:
Phone:
Date: 07/04/2024
Qty. Description
1 SP 46-35
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 55 kW MMS8000 motor with sand shield, water-lubricated journal bearings and a volume
compensating diaphragm.
The rewindable motor contruction allows complete access to the windings for easy rewinding.
The stator windings are PE/PA insulated made for continous operations (S1).
Suitable for temperatures up to 50 °C.
The motor is fitted with a mechanical shaft seal.
The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt100 or Pt1000 sensor can
be fitted.
The motor is for direct-on-line starting (DOL).
Pump
All pump surfaces that are in contact with pumped liquids are made in stainless steel which makes them corrosion-
and wear-resistant. The corrosion diagram below shows the capabilities of the pump and motor in relation to the
temperature in Celsius (y-axis) and the concentration of chloride in ppm (x-axis).
Date: 07/04/2024
Qty. Description
1 The elastomer parts in the pump are made of NBR (Nitrile-Butadiene Rubber) which ensures good wear resistance
and long service intervals.
In case the pump is used for pumping water with high content of hydrocarbons or solvents, Grundfos offers FKM
rubber parts (Fluorocarbon) which are oil and temperature-resistant up to 90 °C.
The pump is built with octagonal bearings with sand flush channels that minimise wear. As wear of the pump is
inevitable, the pump design allows for easy replacement of all internal wear parts (bearings, impeller, wear rings and
seal rings) to maintain high performance and a long lifetime.
The suction interconnector is fitted with a strainer to prevent large particles from entering the pump. The suction
interconnector is designed to comply with NEMA standards for motor mounting/dimensions.
Motor
The winding wire is made from pure electrolytic cobber insulated by extruded two layers of PE/PA with high dielectric
strength properties allowing direct contact between the motor fluid and winding wire.
This ensures the best possible cooling of the winding wire.
The PA layer ensures high mechanical wear properties of the winding wire.
The shaft seal faces are ceramic/carbon. The material combination provides good dry-running resistance. Together
with the shaft seal housing, the sand slinger forms a labyrinth seal, which during normal operating conditions
prevents penetration of sand particles into the shaft seal.
The motor can be fitted with a Pt100 or Pt1000 sensor that together with a control unit ensures that the maximum
operating temperature conditions are not exceeded.
Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 45 °C
Max liquid t at 0.5 m/sec: 45 °C
Technical:
Pump speed on which pump data are based: 2900 rpm
Rated flow: 46 m³/h
Rated head: 308 m
Shaft seal for motor: CER/CARBON
Approvals: CE,EAC,UKCA,SEPRO,MOROCCO
Approvals for drinking water: ACS,DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T45
Return valve: YES
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Cast iron
DIN W.-Nr. 0.6025
ASTM Class 35-40
Installation:
Maximum operating pressure: 60 bar
Maximum outlet pressure: 48 bar
Type of connection: R
Size of connection: 4 inch
Motor diameter: 8 inch
Minimum borehole diameter: 200 mm
Electrical data:
Motor type: MMS8000
Date: 07/04/2024
Qty. Description
1 Motor flange design: Grundfos
Rated power - P2: 55 kW
Power (P2) required by pump: 55 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400-415 V
Rated current: 112-109 A
Starting current: 560-590 %
Cos phi - power factor: 0.88-0.87
Rated speed: 2880-2890 rpm
Start. method: DOL
Enclosure class (IEC 34-5): IP68
Built-in temp. transmitter: N
Motor No: 96521597
Windings: PE2/PA
Others:
Minimum efficiency index, MEI ≥: 0.40
Net weight: 320 kg
Gross weight: 406 kg
Shipping volume: 0.927 m³
Environmental approvals: WEEE
Date: 07/04/2024
On request SP 46-35
Q SP 46-35, 3*415 V eta
[m³/h] [%]
65
60 190
180 200
210
220 230
55 240
250
260
270
50
280
290
300
45 310
320
330
40 340
350
360
35
370
380
30
390
400
25 100
410
420
20 80
430
15 440 60
450
10 40
460
5 20
470 m
0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 P1 [kw]
Q = 49.49 m³/h H = 256.5 m
P1 = 55.77 kW Eta pump+motor = 61.9 %
Pumped liquid = Water Density = 998.2 kg/m³
Date: 07/04/2024
Q SP 46-35, 3*415 V eta
Description Value [m³/h] [%]
General information:
Product name: SP 46-35
Product No: On request
EAN number: On request
Technical:
65
Pump speed on which pump data are 2900 rpm
based: 60 190
180 200 210
Rated flow: 46 m³/h 220 230
55
Rated head: 308 m 240 250
260
Stages: 35 50 270 280
Number of reduced-diameter NONE 290
impellers: 45 310 300
320
Shaft seal for motor: CER/CARBON 330
40
Approvals: CE,EAC,UKCA,SEPRO,MOR 350 340
OCCO 360
35 370
Approvals for drinking water: ACS,DM174 380
Curve tolerance: ISO9906:2012 3B 30 390
400
Model: B
25 410 100
Motor version: T45
420
Return valve: YES 20 80
430
Materials:
15 440 60
Pump: Stainless steel
450
Pump: EN 1.4301 10 40
Pump: AISI 304 460
5 20
Impeller: Stainless steel
470 m
Impeller: EN 1.4301 0 0
Impeller: AISI 304 0 10 20 30 40 50 P1 [kw]
4528
GN 192
R4
R4
Installation: 192 GN
Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 45 °C
Max liquid t at 0.5 m/sec: 45 °C
Electrical data:
1380
Mains frequency: 50 Hz
Rated voltage: 3 x 400-415 V
Rated current: 112-109 A
Starting current: 560-590 %
Cos phi - power factor: 0.88-0.87
Rated speed: 2880-2890 rpm
Start. method: DOL
Enclosure class (IEC 34-5): IP68
Built-in motor protection: NONE U V W PE
Date: 07/04/2024
Description Value
Windings: PE2/PA
Others:
Minimum efficiency index, MEI ≥: 0.40
Net weight: 320 kg
Gross weight: 406 kg
Shipping volume: 0.927 m³
Environmental approvals: WEEE
Date: 07/04/2024
On request SP 46-35
cos phi SP46-35 + MMS8000 55 kW 3*415 V, 50 Hz I
eta [A]
cos phi
0.6 120
0.4 80
0.2 40
0.0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 P2 [kW]
n P1
[rpm] [kW]
3000
P1
2000 80
1000 40
0 0
n = 100 %
Date: 07/04/2024
On request SP 46-35
R4
192 GN
4528
5908
1380
192
Date: 07/04/2024
On request SP 46-35
Input - summary Products
Pump: SP 46-35, 1 x On request
Water volume (max): 461 m³/day
Solar module: 285 x NN 330W
Month for sizing: July
Static lift above ground: 213 m
Dynamic water level: 42 m
Sun tracking: No (fixed)
Location: Sidama, Ethiopia
Latitude: 6.471784 DD, Longitude: 38.341873 DD
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Water production [m³/day] 407.9 412.3 405.4 386.6 382 370.5 346.7 367.6 383.1 389.3 405.2 406.3
Energy production Solar [kWh/day] 622.4 652.6 607.1 539.7 522.6 486.3 440.3 479.8 529.3 552.5 609.5 614.4
Radiation horizontal [kWh/m² day] 7.2 7.7 7.4 6.7 6.6 6.1 5.5 5.9 6.4 6.5 7.0 7.0
Radiation tilt [kWh/m² day] 7.5 8.0 7.4 6.5 6.3 5.8 5.2 5.7 6.3 6.6 7.4 7.4
Avg. Temp. [°C] 13.4 14.5 14.5 14.0 13.8 12.5 11.4 11.6 12.1 12.1 12.7 13.0
Data location: Latitude: 7 DD, Longitude: 39 DD
250 30
200 25
20
150
15
100
10
50
5
0 0
J F M A M J J A S O N D 0 2 4 6 8 10 12 14 16 18 20 22
Month Time of Day
Date: 07/04/2024
On request SP 46-35
Location Map
Date: 07/04/2024
Installation and Input Sizing Results
Water production, Peak flow and Price
Total water production per year: 142000 m³
Avg. water production per day: 388.4 m³/day
Average water production per watt per day: 4.1 l/Wp/day
65
60 190
180 200
210 220
55 230 240
250
260 270
50 280
4528
290
300
45 310
320
330
5908
40
340
350
360
35
370
380
30 390
400
25 410 100
420
20 80
430
15 440 60
1380
450
10 40
460
5 20
470 m
0 0
192
0 5 10 15 20 25 30 35 40 45 50 55 P1 [kw]
Date: 07/04/2024
Order Data:
Position Your pos. Product name Amount Product No Total
SP 46-35 1 On request