Professional Documents
Culture Documents
JNNCE-ECE-7-First Phase Project - Report Template
JNNCE-ECE-7-First Phase Project - Report Template
JNNCE-ECE-7-First Phase Project - Report Template
Submitted By,
Name : USN
Name : USN
Name : USN
Name : USN
towards the partial fulfillment of the requirement for the award of the
Bachelor Degree in Electronics & Communication Engineering as per
the University regulations during December 2023. It is certified that all
corrections / suggestions indicated for Internal Assessment have been
approved as it satisfies the academic requirement in respect of Project
Work First Phase.
…………………… ……………………
(Name of the Guide) (Name of the Coordinator)
Designation, Dept. of ECE, Designation, Dept. of ECE,
JNNCE, Shivamogga. JNNCE, Shivamogga.
………………………..
(Dr. S V Sathyanarayana)
HOD, Dept. of ECE,
JNNCE, Shivamogga.
ABSTRACT
i
TABLE OF CONTENTS
Abstract i
Chapter 1 Preamble
1.1 Introduction 1
1.2 Literature survey 0
1.3 Aim of the project 0
1.4 Objectives 0
1.5 Methodology 0
1.6 Scope of the project / Applications 0
1.7 Limitations 0
1.8 Organization of the report
Chapter 4 Conclusions
Conclusions – Comment about the literature and expected results
References
1.1 Introduction
Font Size and Margins: Times New Roman, Chapter headings : 16 bold capitals -
Justified to the Center, Section headings and sub headings: 14 bold, Title case, all the
running text : 12, Margin all the sides (1”) except the left margin, left margin: 1.5”
The references listed in the References should be cross referenced in all the chapters
as per the contents – standard reference format should be used while writing
References (refer format of the references followed in any standard text book)
The figures should be numbered and captioned as Example: Fig. 2.1 Caption of the
figure – for Chapter No.2. These figures should be cross referred in the related text.