Professional Documents
Culture Documents
Canbuilt Arm Model #: Multifunctional Lifting System
Canbuilt Arm Model #: Multifunctional Lifting System
Model # 5200
Capacity up to 1500 Lbs
• The Lift System can be dressed
with options and setup to perform 45”
a wide variety of lift applications
82” • Flow through base allows legs to
be telescoped backwards
25”
• Dual Control: Air/Manual Hydraulics
with upgraded lever release for
absolute hydraulic control 41”
6”
High Position
84” H
39” 1/2 L
Measured
67” High Horizontal Boom Adapter to hook
24” Low Model # 5260
Slide Horizontal Boom Adapter into the
Secure with FLIP-OVER TOOL HOLDER then secure
Hitch Pin
it with hitch pin and locking bolt
Low Position
In Low Position
35” 1/2 H
2
48”
15”
2
100Lbs Counter Balance
Model # 5280 2 Piece Horizontal
Counterbalance provides the ability to
lift when the lift point is extended past
Boom Adapter
the front wheels. Apply on base or the Model # 5260
back of legs as shown below. Multiple 1. Adapter for Flip-Over-Tool
counterbalance units can be used as 2. Height Adapter
needed
Skid Spreader
Model # 3200SSL
• Skid spreader reduces all capacity by 20%
• Increases stability