Professional Documents
Culture Documents
CCSI - ADSS - 12F - G652D - Cable - Spec - Rev1 - Diskominfo Bogor - Revisi
CCSI - ADSS - 12F - G652D - Cable - Spec - Rev1 - Diskominfo Bogor - Revisi
GENERAL
The cable is multi-purpose type for application which can be installed as an aerial cable on the pole up to 100-
m distance (span) or as a duct cable, to be pulled inside a small HDPE subducts. The cable is metallic-free
which benefits the customers that needs no grounding works and free from lightning strikes.
REFERENCE STANDARDS
The offered fiber optic cable complies to the ITU-T G.652.D, IEC 60794, IEC 60793, and related TIA/ EIA
standards.
CONSTRUCTIONS
- FRP/ GRP, non-metallic, anti buckling central strength element
- All fibers shall be properly colored with transparent, bright, distinguishable colors
- Fiber colour sequence : blue, orange, green, brown, grey, white
- Each six fibers are inserted into the gel-filled thermoplastic loose buffer tubes
- Inner loose tube wall material is Polycarbonate (PC) and outer wall is Polybuthylene terephthalate (PBT)
- The coloured loose tubes are stranded in the following sequence : blue, orange, filler, filler, filler
- All loose tubes with fillers are SZ-stranded around GRP central element and bound with polyester yarns
- Swellable water blocking yarn is applied helically on the FRP central element
- Swellable water blocking tape(WBT) is wrapped around stranded loose tube
- Peripheral strength element/yarn are applied over the swellable water blocking tape
- Ripcord to ease cable jacket opening
- Black UV resistant high density polyethylene (HDPE) jacket as outer protection
1
2
LEGEND:
3
1. Outer UV Resistant Black HDPE Jacket
4
2. Peripheral Strength Element/Yarn
5
3. Plastic Filler
4. FRP/ GRP Central Element
6
5. Water Blocking Swellable Yarn
7 6. Dual Layer PC-PBT Loose Tube
8 Contains Optical Fibers
7. Water Blocking Swellable Tape
8. Ripcord
CABLE MARKINGS
The cable is printed with bright-colored markings as below format.
[meter] [year] CCS INDONESIA KABEL OPTIK ADSS SP100 SM.D LT 12/2T [m+1]
FIBER PARAMETERS
Refer to Fiber Specification ITU-T G.652.D_003 (Doc No. FIBER – SM52D-015 Rev.0)
CABLE PARAMETERS
Fiber Quantity 12
TECHNICAL CHARACTERISTICS
Sagging 1-2%
Span 100 m