Professional Documents
Culture Documents
Printinginstructions
Printinginstructions
The Sides
All sides are 10 mm thick + pipes and other visual things. This is useful for changing color or
layer height.
Infill:
The Sides - 10%
Smaller mechanics, gears and pipes - 40-60%
Bolt, Ball, S1 Fork, S1 knob 80-100%
Layers
5 top and bottom layers at 0.20 mm
8 top and bottom layers at 0.10 mm
3 wall lines
Supports
You may need supports for
Side 2
Side 3
S3 slider
The Ball
The Ball can be difficult to print. You can use rafts and support to stabilize it.
Optionally you can buy a 8 mm steel ball.